Valmet 2005
The Valmet 2005 is a tractor produced by Valmet. It is equipped with a 334.4 ci 5.5 L engine. The listed engine power is Diesel (listed): 140 hp / 104.4 kW. Transmission: 16 forward and 4 reverse. Operating weight: 14,660 lbs 6649 kg.
Engine Power
Diesel (listed): 140 hp / 104.4 kW
Fuel & Capacities
55.48 gal
210.0 L
Transmission
16 forward and 4 reverse
Operating Weight
14,660 lbs
6649 kg
Overview
 | 1986 - 1987
Row-Crop tractor |
|---|
Production | |
|---|---|
Manufacturer | Valmet |
Row-Crop tractor | |
Valmet 2005 Engine | |
|---|---|
Volvo 5.5L 6-cyl diesel | |
Fuel tank | 55.48 gal
210.0 L |
Engine details ...  | |
Valmet 2005 Transmission | |
|---|---|
16-speed two-speed power shift | |
Transmission details ...  |
Valmet 2005 Power | |
|---|---|
Engine | 140 hp
104.4 kW |
Mechanical | |
|---|---|
Four-wheel drive |
Hydraulics | |
|---|---|
Pump flow | 11.36 gpm
43.0 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Rear lift | 11020 lbs
4998 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Clutch | hydraulic dry disc |
Rear PTO Type | 540/1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 112 inches
284 cm |
Weight | 14,660 lbs
6649 kg |
Front tire | 16.9R28 |
Rear tire | 20.8R38 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 90 |
Charging volts | 14 |
Batteries | 2 |
Battery volts | 12 |
Engine
Engine Detail — 334.4 ci / 5.5 L Diesel
Manufacturer | Volvo TD60B |
Configuration | turbocharged diesel, 6-cylinder, liquid-cooled |
Displacement | 334.4 ci
5.5 L |
Bore/Stroke | 3.875x4.724 inches
98 x 120 mm |
Power | 140 hp
104.4 kW |
Compression | 16:1 |
Rated RPM | 2300 |
Starter volts | 12 |
Transmission
Transmission — 16 forward and 4 reverse two-speed power shift
Type | two-speed power shift |
Gears | 16 forward and 4 reverse |
Clutch | 355.6mm dry disc |
Four gears (1-4) plus reverse (R) in two ranges (low/high) with two-speed pushbutton power shift. | |
Dimensions
Valmet 2005 Tires | |
|---|---|
Ag front | 16.9R28 |
Ag rear | 20.8R38 |
Dimensions | |
|---|---|
Wheelbase | 112 inches
284 cm |
Length | 184.4 inches
468 cm |
Height (cab) | 119.1 inches
302 cm |
Height (exhaust) | 132.7 inches
337 cm |
Weight | 14,660 lbs
6649 kg |
Photos
Valmet 2005 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Valmet 2005 based on its 140 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 5 to 7 Bottom (18")5 - 7 铧 (45 cm) | Commercial / Field Scale | Large acreage tillage; requires front ballast weights. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Valmet 2005.
Estimated Continuous Field Runtime: 7.6 hrs
Approximately 7.6 hours of continuous field operation at ~75% rated power on a full tank (55.5 gal / 210 L).
Estimated 75% Load Fuel Burn~7.3 gal/hr (27.6 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Valmet 2005 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Valmet 2005.
Converted Equivalents:
Horsepower (HP)140 hp
Kilowatts (kW)104.4 kW
Metric Horsepower (PS / CV)141.9 PS
Direct Competitor Comparison
Compare Valmet 2005 against same-era industry alternatives in the same horsepower class.
Current Model
Valmet
Valmet 2005
Engine Power:Diesel (listed): 140 hp / 104.4 kW
★ Baseline Reference
Related models
Valmet 6800
- Power:
- 114
- Production years:
- 1996 - 2001
Valmet 1102
- Power:
- 115
- Production years:
- 1973 - 1980
Valmet 6850
- Power:
- 118
- Production years:
- 1998 - 2003
Valmet 8100
- Power:
- 118
- Production years:
- 1990 - 1996
Valmet 6900
- Power:
- 120
- Production years:
- 1997 - 2000