Valmet 6200

The Valmet 6200 is a tractor produced by Valmet. It is equipped with a 268.4 ci 4.4 L engine. The listed engine power is Diesel (listed): 80 hp / 59.7 kW. Transmission: Delta Powershift. Operating weight: 8250 lbs 3742 kg.

Engine Power
Diesel (listed): 80 hp / 59.7 kW
Fuel & Capacities
43.6 gal 165.0 L
Transmission
Delta Powershift
Operating Weight
8250 lbs 3742 kg

Overview

Valmet 6200 tractor photo
1996 - 2000 Mezzo SeriesRow-Crop tractor Mezzo Series Row-Crop tractor
Production
Manufacturer
Valmet
Row-Crop tractor
Original price was $47,000 in 2000
Valmet 6200 Engine
SisuDiesel 4.4L 4-cyl diesel
Fuel tank
43.6 gal 165.0 L
Engine details ...
Valmet 6200 Power
Engine
80 hp 59.7 kW
Mechanical
Four-wheel drive
Power steering
Wet disc brakes
Cab standard with optional air-conditioning.
Hydraulics
Pump flow
18.5 gpm 70.0 lpm
Tractor hitch
Rear Type
II
Rear lift
9910 lbs 4495 kg
Power Take-off (PTO)
Rear PTO
independent
Rear PTO Type
540/1000
Dimensions & Tires
Wheelbase
91.6 inches 232 cm
Weight
8250 lbs 3742 kg
Front tire
13.6R24
Rear tire
16.9R34
Full dimensions and tires ...
Electrical
Ground
negative
Charging system
alternator
Charging amps
120
Battery volts
12
Battery AH
174

Engine

Engine Detail — 268.4 ci / 4.4 L Diesel

Manufacturer
SisuDiesel 420DSRE
Configuration
turbocharged diesel, 4-cylinder, liquid-cooled
Displacement
268.4 ci 4.4 L
Bore/Stroke
4.252x4.724 inches 108 x 120 mm
Power
80 hp 59.7 kW
Compression
16.5:1
Rated RPM
1550
Torque
265.5 lb-ft 360.0 Nm
Torque RPM
1400
Starter
electric
Starter volts
12

Transmission

Transmission options
12-speed syncro shuttle
36-speed three-speed power shift

Transmission — 12 forward and reverse syncro shuttle

Type
syncro shuttle
Gears
12 forward and reverse
Four gears in three ranges with shuttle.

Transmission — Delta Powershift

Transmission
Delta Powershift
Type
three-speed power shift
Gears
36 forward and reverse
Four gears in three ranges with three-speed power shift and shuttle.

Dimensions

Valmet 6200 Tires
Ag front
13.6R24
Ag rear
16.9R34
Dimensions
Wheelbase
91.6 inches 232 cm
Length
177.7 inches 451 cm
Width
89.8 inches 228 cm
Height (cab)
106.3 inches 270 cm
Height (exhaust)
107.9 inches 274 cm
Weight
8250 lbs 3742 kg
Clearance (front axle)
16.9 inches 42 cm
Clearance (rear axle)
17.1 inches 43 cm

Photos

Valmet 6200 tractor photo

Valmet 6200 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Valmet 6200 based on its 80 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
3 to 4 Bottom (16")3 - 4 铧 (40 cm)Heavy DutySuitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing
7 to 8 ft (84-96 in)2.1 - 2.4 mHeavy DutyHeavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep
78 to 84 in200 - 215 cmHeavy DutyHeavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage
10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙Heavy DutyAggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage
4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机Heavy DutySilage and dry hay; 540 RPM PTO with slip-clutch.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Valmet 6200.

Estimated Continuous Field Runtime: 10.5 hrs

Approximately 10.5 hours of continuous field operation at ~75% rated power on a full tank (43.6 gal / 165 L).

Estimated 75% Load Fuel Burn~4.2 gal/hr (15.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Valmet 6200 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Valmet 6200.

Converted Equivalents:

Horsepower (HP)80 hp
Kilowatts (kW)59.7 kW
Metric Horsepower (PS / CV)81.1 PS

Direct Competitor Comparison

Compare Valmet 6200 against same-era industry alternatives in the same horsepower class.

Current Model
Valmet

Valmet 6200

Engine Power:Diesel (listed): 80 hp / 59.7 kW
★ Baseline Reference
CaseIHMarket Competitor

CaseIH 4210

Engine Power:72
Production Years:1994 - 1997
Massey FergusonMarket Competitor

Massey Ferguson 435

Engine Power:72
Production Years:2001 - 2010
DeereMarket Competitor

Deere 5410

Engine Power:72
Production Years:2000 - 2002
FordMarket Competitor

Ford 5610

Engine Power:72
Production Years:1988 - 1991