Valmet 6250
The Valmet 6250 is a tractor produced by Valmet. It is equipped with a 268.4 ci 4.4 L engine. The listed engine power is Diesel (listed): 79.1 hp / 59.0 kW. Transmission: HiTech. Operating weight: 9700 lbs 4399 kg.
Engine Power
Diesel (listed): 79.1 hp / 59.0 kW
Fuel & Capacities
43.6 gal
165.0 L
Transmission
HiTech
Operating Weight
9700 lbs
4399 kg
Overview
 | 2000 - 2003
HiTech 6050 SeriesRow-Crop tractor
HiTech 6050 Series
Row-Crop tractor |
|---|
Production | |
|---|---|
Manufacturer | Valmet |
Row-Crop tractor | |
Original price | $54,000 |
Valmet 6250 Engine | |
|---|---|
Valmet 4.4L 4-cyl diesel | |
Fuel tank | 43.6 gal
165.0 L |
Engine details ...  | |
Valmet 6250 Transmission | |
|---|---|
36-speed three-speed power shift | |
Transmission details ...  |
Valmet 6250 Power | |
|---|---|
Engine | 79.1 hp
59.0 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Power steering | |
Cab standard. |
Hydraulics | |
|---|---|
Pump flow | 19.3 gpm
73.1 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Rear lift | 12346 lbs
5600 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 91.6 inches
232 cm |
Weight | 9700 lbs
4399 kg |
Front tire | 13.6R28 |
Rear tire | 16.9R38 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Battery volts | 12 |
Battery AH | 184 |
References | |
|---|---|
 | |
Modell-programmet 2000 published by Valtra | |
HiTech published in 1999, by Valtra | |
TwinTrac published in 2001, by Valtra |
Engine
Engine Detail — 268.4 ci / 4.4 L Diesel
Manufacturer | Valmet 420 DSRE |
Configuration | turbocharged diesel, 4-cylinder, liquid-cooled |
Displacement | 268.4 ci
4.4 L |
Bore/Stroke | 4.25x4.72 inches
108 x 120 mm |
Power | 79.1 hp
59.0 kW |
Rated RPM | 2200 |
Torque | 265.5 lb-ft
360.0 Nm |
Torque RPM | 1400 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — HiTech
Transmission | HiTech |
Type | three-speed power shift |
Gears | 36 forward and reverse |
Four gears in three ranges with three-speed power shift and shuttle. | |
With 16.9R38 rear tires. | |
 | |
Dimensions
Valmet 6250 Tires | |
|---|---|
Standard tires (ag) | Front: 13.6R28. Rear: 16.9R38 |
Optional tires (ag) | Front: 440/65R28. Rear: 540/65R38 |
Dimensions | |
|---|---|
Wheelbase | 91.6 inches
232 cm |
Length | 176.2 inches
447 cm |
Width | 85.8 inches
217 cm |
Height (cab) | 109.1 inches
277 cm |
Height (exhaust) | 107.9 inches
274 cm |
Weight | 9700 lbs
4399 kg |
Clearance (front axle) | 16.9 inches
42 cm |
Clearance (rear axle) | 17.1 inches
43 cm |
Recommended Implements & Sizing Guide
Engineering recommendations for Valmet 6250 based on its 79.1 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Valmet 6250.
Estimated Continuous Field Runtime: 10.6 hrs
Approximately 10.6 hours of continuous field operation at ~75% rated power on a full tank (43.6 gal / 165 L).
Estimated 75% Load Fuel Burn~4.1 gal/hr (15.6 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Valmet 6250 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Valmet 6250.
Converted Equivalents:
Horsepower (HP)79.1 hp
Kilowatts (kW)59 kW
Metric Horsepower (PS / CV)80.2 PS
Direct Competitor Comparison
Compare Valmet 6250 against same-era industry alternatives in the same horsepower class.
Current Model
Valmet
Valmet 6250
Engine Power:Diesel (listed): 79.1 hp / 59.0 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 685
Engine Power:71.8
Production Years:1981 - 1985
Related models
Valmet 602 Turbo
- Power:
- 64.4
- Production years:
- 1980 - 1982
Valmet 505
- Power:
- 65
- Production years:
- 1982 - 1991
Valmet 604T
- Power:
- 66
- Production years:
- 1982 - 1985
Valmet 455
- Power:
- 67
- Production years:
- 1989 - 1994
Valmet 465
- Power:
- 70
- Production years:
- 1993 - 1997