Valmet 8100
The Valmet 8100 is a tractor produced by Valmet. It is equipped with a 402.6 ci 6.6 L engine. The listed engine power is Diesel (listed): 118 hp / 88.0 kW. Transmission: Delta Powershift. Operating weight: 10318 lbs 4680 kg.
Engine Power
Diesel (listed): 118 hp / 88.0 kW
Fuel & Capacities
43.6 gal
165.0 L
Transmission
Delta Powershift
Operating Weight
10318 lbs
4680 kg
Overview
 | 1990 - 1996
Mezzo SeriesRow-Crop tractor
Mezzo Series
Row-Crop tractor |
|---|
Production | |
|---|---|
Manufacturer | Valmet |
Row-Crop tractor | |
Valmet 8100 Engine | |
|---|---|
SisuDiesel 6.6L 6-cyl diesel | |
Fuel tank | 43.6 gal
165.0 L |
Engine details ...  | |
Valmet 8100 Power | |
|---|---|
Engine | 118 hp
88.0 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Power steering | |
Hydraulic wet disc brakes | |
Cab standard with available air-conditioning. |
Hydraulics | |
|---|---|
Pump flow | 18.5 gpm
70.0 lpm |
Tractor hitch | |
|---|---|
Rear lift | 12125 lbs
5499 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 |
Engine RPM | 540@1874 |
1000@2080 | |
Dimensions & Tires | |
|---|---|
Wheelbase | 100.8 inches
256 cm |
Weight | 10318 lbs
4680 kg |
Front tire | 14.9R28 |
Rear tire | 18.4R38 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Battery volts | 12 |
Battery AH | 150 |
References | |
|---|---|
 | |
6100 - 6300 - 6400 - 6600 - 8000 - 8100 Twin Trac published in 1992, by Valmet | |
6000-8400 published in 1994, by Valmet | |
6000-8400 published in 1995, by Valmet | |
M5 - Mezzo - Mega published in 1995, by Valmet |
Engine
Engine Detail — 402.6 ci / 6.6 L Diesel
Manufacturer | SisuDiesel 620D |
Fuel Type | Diesel |
Configuration | 6-cylinder, liquid-cooled |
Displacement | 402.6 ci
6.6 L |
Bore/Stroke | 4.25x4.72 inches
108 x 120 mm |
Power | 118 hp
88.0 kW |
Compression | 16.5:1 |
Rated RPM | 2225 |
Torque | 335.6 lb-ft
455.1 Nm |
Torque RPM | 1550 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission options | |
|---|---|
24-speed two-speed power shift | |
36-speed three-speed power shift |
Transmission — 24 forward and reverse two-speed power shift
Type | two-speed power shift |
Gears | 24 forward and reverse |
 | |
Transmission — Delta Powershift
Transmission | Delta Powershift |
Type | three-speed power shift |
Gears | 36 forward and reverse |
Dimensions
Valmet 8100 Tires | |
|---|---|
Ag front | 14.9R28 |
Ag rear | 18.4R38 |
Dimensions | |
|---|---|
Wheelbase | 100.8 inches
256 cm |
Length | 187 inches
474 cm |
Height (ROPS) | 113 inches
287 cm |
Height (cab) | 108.3 inches
275 cm |
Weight | 10318 lbs
4680 kg |
Clearance (front axle) | 20.1 inches
51 cm |
Clearance (rear axle) | 19.1 inches
48 cm |
Photos
Valmet 8100
Recommended Implements & Sizing Guide
Engineering recommendations for Valmet 8100 based on its 118 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Valmet 8100.
Estimated Continuous Field Runtime: 7.1 hrs
Approximately 7.1 hours of continuous field operation at ~75% rated power on a full tank (43.6 gal / 165 L).
Estimated 75% Load Fuel Burn~6.1 gal/hr (23.2 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Valmet 8100 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Valmet 8100.
Converted Equivalents:
Horsepower (HP)118 hp
Kilowatts (kW)88 kW
Metric Horsepower (PS / CV)119.6 PS
Direct Competitor Comparison
Compare Valmet 8100 against same-era industry alternatives in the same horsepower class.
Current Model
Valmet
Valmet 8100
Engine Power:Diesel (listed): 118 hp / 88.0 kW
★ Baseline Reference
Related models
Valmet 805
- Power:
- 95
- Production years:
- 1982 - 1991
Valmet 903
- Power:
- 95.2
- Production years:
- 1979 - 1983
Valmet 985
- Power:
- 97.8
Valmet 6550
- Power:
- 98.6
- Production years:
- 1998 - 2003
Valmet 855
- Power:
- 100
- Production years:
- 1989 - 1991