TractorData Logo
TractorData

Valmet 8150

The Valmet 8150 is a tractor produced by Valmet. It is equipped with a 402.6 ci 6.6 L engine. The listed engine power is Diesel (listed): 123.4 hp / 92.0 kW. Transmission: HiTech. Operating weight: 11220 lbs 5089 kg.

Engine Power
Diesel (listed): 123.4 hp / 92.0 kW
Fuel & Capacities
43.6 gal 165.0 L
Transmission
HiTech
Operating Weight
11220 lbs 5089 kg

Overview

Valmet 8150 tractor photo
1995 - 2002 HiTech 8050 SeriesRow-Crop tractor HiTech 8050 Series Row-Crop tractor
Production
Manufacturer
Valmet
Row-Crop tractor
Built in Suolahti, Finland
Valmet 8150 Engine
SisuDiesel 6.6L 6-cyl diesel
Fuel tank
43.6 gal 165.0 L
Engine details ...
Valmet 8150 Transmission
36-speed three-speed power shift
Transmission details ...
Valmet 8150 Power
Engine
123.4 hp 92.0 kW
Drawbar (tested)
91.9 hp 68.5 kW
PTO (tested)
113.3 hp 84.5 kW
Performance test details ...
Mechanical
Four-wheel drive
Power steering
Hydraulic wet disc brakes
Cab standard.
Hydraulics
Pressure
2756 psi 190.0 bar
Pump flow
19.3 gpm 73.1 lpm
Tractor hitch
Rear Type
III
Rear lift
15432 lbs 6999 kg
Power Take-off (PTO)
Rear PTO
independent
Rear PTO Type
540/1000
540/540E OptOptional
1000 OptOptional
Engine RPM
540@1874
1000@2080
540E@1539
Dimensions & Tires
Wheelbase
100.7 inches 255 cm
Weight
11220 lbs 5089 kg
Front tire
14.9R28
Rear tire
18.4R38
Full dimensions and tires ...
Electrical
Ground
negative
Charging system
alternator
Battery volts
12
References
8150 references literature
Modell-programmet 2000 published by Valtra
HiTech published in 1999, by Valtra
TwinTrac published in 2001, by Valtra

Engine

Engine Detail — 402.6 ci / 6.6 L Diesel

Manufacturer
SisuDiesel 620 DSRE
Configuration
turbocharged diesel, 6-cylinder, liquid-cooled
Displacement
402.6 ci 6.6 L
Bore/Stroke
4.25x4.72 inches 108 x 120 mm
Power
123.4 hp 92.0 kW
Rated RPM
2200
Torque
398 lb-ft 539.7 Nm
Torque RPM
1400
Starter
electric
Starter volts
12

Transmission

Transmission — HiTech

Transmission
HiTech
Type
three-speed power shift
Gears
36 forward and reverse
Four gears in three ranges with three-speed power shift and power shuttle.
With 18.4R38 rear tires.
8150 HiTech three-speed power shift speeds

Dimensions

Valmet 8150 Tires
Ag front
14.9R28
Ag rear
18.4R38
Dimensions
Wheelbase
100.7 inches 255 cm
Length
190.9 inches 484 cm
Width
85.8 inches 217 cm
Height (cab)
110 inches 279 cm
Height (exhaust)
110.4 inches 280 cm
Weight
11220 lbs 5089 kg
Clearance (front axle)
20.1 inches 51 cm
Clearance (rear axle)
19.7 inches 50 cm

Tests

OCED Tractor Test 1618
Diesel HiTech 4WD February 1996 - March 1996, Link: OCED Tractor Test 1618 file
PTO performance
Max power
113.3 hp 84.5 kW
Fuel use
6.5 gal/hour 24.6 l/hour
Power at rated engine speed
109.3 hp 81.5 kW
Fuel use
6.9 gal/hour 26.1 l/hour
Power at rated PTO speed
111.8 hp 83.4 kW
Fuel use
6.7 gal/hour 25.4 l/hour
Drawbar performance
Max power
91.9 hp 68.5 kW
Fuel use
7.0 gal/hour 26.5 l/hour
Max pull
12240 lbs 5552 kg

Photos

Valmet 8150 tractor photo

Valmet 8150 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Valmet 8150 based on its 123.4 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)Heavy DutyHeavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing
10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼Heavy DutyWide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep
90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机Commercial / Field ScaleDeep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage
15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙Commercial / Field ScaleWide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage
5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机Heavy DutyHigh density baling; requires minimum 85 PTO HP.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Valmet 8150.

Estimated Continuous Field Runtime: 6.8 hrs

Approximately 6.8 hours of continuous field operation at ~75% rated power on a full tank (43.6 gal / 165 L).

Estimated 75% Load Fuel Burn~6.4 gal/hr (24.3 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Valmet 8150 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Valmet 8150.

Converted Equivalents:

Horsepower (HP)123.4 hp
Kilowatts (kW)92 kW
Metric Horsepower (PS / CV)125.1 PS

Direct Competitor Comparison

Compare Valmet 8150 against same-era industry alternatives in the same horsepower class.

Current Model
Valmet

Valmet 8150

Engine Power:Diesel (listed): 123.4 hp / 92.0 kW
★ Baseline Reference
Massey FergusonMarket Competitor

Massey Ferguson 2675

Engine Power:111.1
Production Years:1978 - 1983
View Full Specs→
DeereMarket Competitor

Deere 3255

Engine Power:111.1
Production Years:1991 - 1993
View Full Specs→
CaseIHMarket Competitor

CaseIH 5240

Engine Power:111.1
Production Years:1992 - 1997
View Full Specs→
New HollandMarket Competitor

New Holland 8260

Engine Power:111.1
Production Years:1996 - 1999
View Full Specs→

Related models