Valmet 8850
The Valmet 8850 is a tractor produced by Valmet. It is equipped with a 449.6 ci 7.4 L engine. The listed engine power is Diesel (listed): 200 hp / 149.1 kW. Transmission: Dynashift. Operating weight: 16,670 lbs 7561 kg.
Engine Power
Diesel (listed): 200 hp / 149.1 kW
Fuel & Capacities
71.3 gal
269.9 L
Transmission
Dynashift
Operating Weight
16,670 lbs
7561 kg
Overview
 | 1997 - 1998
Mega SeriesRow-Crop tractorMassey Ferguson built
Mega Series
Row-Crop tractor
Massey Ferguson built |
|---|
Production | |
|---|---|
Distributor | Valmet |
Manufacturer | Massey Ferguson |
Row-Crop tractor | |
Built in Beauvais, France | |
Variants | |
|---|---|
8160 | similar Massey Ferguson model |
Valmet 8850 Engine | |
|---|---|
SisuDiesel 7.4L 6-cyl diesel | |
Fuel tank | 71.3 gal
269.9 L |
Engine details ...  | |
Valmet 8850 Transmission | |
|---|---|
32-speed four-speed power shift | |
Transmission details ...  |
Valmet 8850 Power | |
|---|---|
Engine | 200 hp
149.1 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Power steering | |
Cab standard |
Hydraulics | |
|---|---|
Pump flow | 29.06 gpm
110.0 lpm |
Tractor hitch | |
|---|---|
Rear lift | 17,200 lbs
7801 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 115.4 inches
293 cm |
Weight | 16,670 lbs
7561 kg |
Front tire | 16.9R30 |
Rear tire | 20.8R42 |
Full dimensions and tires ...  | |
Engine
Engine Detail — 449.6 ci / 7.4 L Diesel
Manufacturer | SisuDiesel 634DS |
Configuration | turbocharged diesel, 6-cylinder, liquid-cooled |
Displacement | 449.6 ci
7.4 L |
Bore/Stroke | 4.252x5.276 inches
108 x 134 mm |
Power | 200 hp
149.1 kW |
Rated RPM | 2200 |
Transmission
Transmission — Dynashift
Transmission | Dynashift |
Type | four-speed power shift |
Gears | 32 forward and reverse |
Dimensions
Valmet 8850 Tires | |
|---|---|
Ag front | 16.9R30 |
Ag rear | 20.8R42 |
Dimensions | |
|---|---|
Wheelbase | 115.4 inches
293 cm |
Length | 215.4 inches
547 cm |
Height | 118.9 inches
302 cm |
Weight | 16,670 lbs
7561 kg |
Recommended Implements & Sizing Guide
Engineering recommendations for Valmet 8850 based on its 200 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 5 to 7 Bottom (18")5 - 7 铧 (45 cm) | Commercial / Field Scale | Large acreage tillage; requires front ballast weights. |
Rotary Cutter / MowerMowing & Clearing | 15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼 | Commercial / Field Scale | Large commercial field and roadside mowing operations. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m) | Commercial / Field Scale | High-capacity commercial forage harvesting (1000 RPM PTO). |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Valmet 8850.
Estimated Continuous Field Runtime: 6.9 hrs
Approximately 6.9 hours of continuous field operation at ~75% rated power on a full tank (71.3 gal / 269.9 L).
Estimated 75% Load Fuel Burn~10.4 gal/hr (39.4 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Valmet 8850 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Valmet 8850.
Converted Equivalents:
Horsepower (HP)200 hp
Kilowatts (kW)149.1 kW
Metric Horsepower (PS / CV)202.8 PS
Direct Competitor Comparison
Compare Valmet 8850 against same-era industry alternatives in the same horsepower class.
Current Model
Valmet
Valmet 8850
Engine Power:Diesel (listed): 200 hp / 149.1 kW
★ Baseline Reference
Related models
Valmet 2105
- Power:
- 163
- Production years:
- 1986 - 1987
Valmet 8600
- Power:
- 170
- Production years:
- 1989 - 1994
Valmet 8750
- Power:
- 190
- Production years:
- 1995 - 2000
Valmet 8800
- Power:
- 190
- Production years:
- 1994 - 1996
Valmet 8950
- Power:
- 197.1
- Production years:
- 1998 - 2002