Valtra N101
The Valtra N101 is a tractor produced by Valtra. It is equipped with a 268.5 ci 4.4 L engine. The listed engine power is Diesel (listed): 110 hp / 82.0 kW. Transmission: 36 forward and reverse. Operating weight: 10,690 lbs 4848 kg.
Engine Power
Diesel (listed): 110 hp / 82.0 kW
Fuel & Capacities
58.1 gal
219.9 L
Transmission
36 forward and reverse
Operating Weight
10,690 lbs
4848 kg
Overview
 | 2007 - 2012
N SeriesUtility tractor
N Series
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Valtra (a part of AGCO) |
Utility tractor | |
Variants | |
|---|---|
N101 Classic | mechanical transmission and hydraulic control |
N101 HiTech | electronic transmission, mechanical hydraulics |
Valtra N101 Engine | |
|---|---|
SisuDiesel 4.4L 4-cyl diesel | |
Fuel tank | 58.1 gal
219.9 L |
Engine details ...  | |
Valtra N101 Power | |
|---|---|
Engine | 110 hp
82.0 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Hydraulic disc brakes | |
Cab standard |
Hydraulics | |
|---|---|
Pressure | 2843 psi
196.0 bar |
Valves | up to 4 rear, 2 front |
Pump flow | 19.3 gpm
73.1 lpm |
Tractor hitch | |
|---|---|
Rear lift | 12,350 lbs
5601 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | ground/540E/1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 101 inches
256 cm |
Weight | 10,690 lbs
4848 kg |
Front tire | 14.9R24 |
Rear tire | 18.4R34 |
Full dimensions and tires ...  | |
Engine
Engine Detail — 268.5 ci / 4.4 L Diesel
Manufacturer | SisuDiesel 44CTA |
Configuration | intercooled turbocharged diesel, 4-cylinder, liquid-cooled |
Displacement | 268.5 ci
4.4 L |
Bore/Stroke | 4.25x4.72 inches
108 x 120 mm |
Power | 110 hp
82.0 kW |
Rated RPM | 2200 |
Torque | 339.3 lb-ft
460.1 Nm |
Torque RPM | 1500 |
Transmission
Transmission options | |
|---|---|
24-speed | |
36-speed |
Transmission — 24 forward and reverse
Gears | 24 forward and reverse |
Transmission — 36 forward and reverse
Gears | 36 forward and reverse |
Dimensions
Valtra N101 Tires | |
|---|---|
Ag front | 14.9R24 |
Ag rear | 18.4R34 |
Dimensions | |
|---|---|
Wheelbase | 101 inches
256 cm |
Length | 177.1 inches
449 cm |
Width | 89.3 inches
226 cm |
Height | 114 inches
289 cm |
Weight | 10,690 lbs
4848 kg |
Ground clearance | 19.7 inches
50 cm |
Photos
Valtra N101 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Valtra N101 based on its 110 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Valtra N101.
Estimated Continuous Field Runtime: 10.2 hrs
Approximately 10.2 hours of continuous field operation at ~75% rated power on a full tank (58.1 gal / 219.9 L).
Estimated 75% Load Fuel Burn~5.7 gal/hr (21.7 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Valtra N101 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Valtra N101.
Converted Equivalents:
Horsepower (HP)110 hp
Kilowatts (kW)82 kW
Metric Horsepower (PS / CV)111.5 PS
Direct Competitor Comparison
Compare Valtra N101 against same-era industry alternatives in the same horsepower class.
Current Model
Valtra
Valtra N101
Engine Power:Diesel (listed): 110 hp / 82.0 kW
★ Baseline Reference
Related models
Valtra A82
- Power:
- 88
- Production years:
- 2008 - 2012
Valtra N82
- Power:
- 88
- Production years:
- 2007 - 2012
Valtra A94
- Power:
- 92
- Production years:
- 2017 - 2020
Valtra 6200
- Power:
- 92.5
- Production years:
- 2003 - 2007
Valtra 6250Hi
- Power:
- 92.5
- Production years:
- 2004 - 2006