Yanmar F215
The Yanmar F215 is a tractor produced by Yanmar. It is equipped with a 85.1 ci 1.4 L engine. The listed engine power is Diesel (listed): 20.7 hp / 15.4 kW. Transmission: 9 forward and 3 reverse. Operating weight: 2028 to 2216 pounds.
Engine Power
Diesel (listed): 20.7 hp / 15.4 kW
Fuel & Capacities
6.6 gal
25.0 L
Transmission
9 forward and 3 reverse
Operating Weight
2028 to 2216 pounds
Overview
![]() | 1987 - 1992
Compact Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Yanmar |
Compact Utility tractor | |
Variants | |
|---|---|
F215 | 2WD gear |
F215D | 4WD gear |
FX215 | 2WD power shift |
FX215D | 4WD power shift |
Yanmar F215 Engine | |
|---|---|
Yanmar 1.4L 3-cyl diesel | |
Fuel tank | 6.6 gal
25.0 L |
Engine details ... | |
Yanmar F215 Transmission | |
|---|---|
9-speed gear | |
Transmission details ... |
Yanmar F215 Power | |
|---|---|
Engine | 20.7 hp
15.4 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Open operator station. |
Tractor hitch | |
|---|---|
Rear Type | JIS1 |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 (1.375) |
Engine RPM | 574@2500 |
698@2500 | |
958@2500 | |
1293@2500 | |
Dimensions & Tires | |
|---|---|
2WD Wheelbase | 59.5 inches
151 cm |
4WD Wheelbase | 60 inches
152 cm |
Weight | 2028 to 2216 pounds |
Front tire | 4.00-12 |
2WD Rear tire | 9.5-22 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 16 |
Battery volts | 12 |
Battery AH | 75 |
Engine
Engine Detail — 85.1 ci / 1.4 L Diesel
Manufacturer | Yanmar 3TNB82 |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 85.1 ci
1.4 L |
Bore/Stroke | 3.23x3.46 inches
82 x 88 mm |
Power | 20.7 hp
15.4 kW |
Rated RPM | 2500 |
Starter volts | 12 |
Transmission
Transmission — 9 forward and 3 reverse gear
Type | gear |
Gears | 9 forward and 3 reverse |
Three gears in three ranges. | |
![]() | |
Dimensions
Yanmar F215 Tires | |
|---|---|
2WD Standard tires (ag) | Front: 4.00-12. Rear: 9.5-22 |
4WD Standard tires (ag) | Front: 6-14. Rear: 9.5-22 |
Dimensions | |
|---|---|
2WD Wheelbase | 59.5 inches
151 cm |
4WD Wheelbase | 60 inches
152 cm |
Length | 111.8 inches
283 cm |
Width | 48.8 inches
123 cm |
Height | 56.9 inches
144 cm |
2WD Weight | 2028 lbs
919 kg |
4WD Weight | 2216 lbs
1005 kg |
2WD Ground clearance | 11.7 inches
29 cm |
4WD Ground clearance | 11 inches
27 cm |
2WD Front tread | 35.8 inches
90 cm |
4WD Front tread | 40.2 inches
102 cm |
Rear tread | 38.2/42.9 inches
97/108 cm |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for Yanmar F215 based on its 20.7 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 4 ft (48 in)1.2 m | Light Duty | Pasture clipping and light brush under 1" diameter. |
Rotary TillerSeedbed Prep | 42 to 48 in105 - 120 cm | Light Duty | Covers compact tractor tire width. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Yanmar F215.
Estimated Continuous Field Runtime: 6.1 hrs
Approximately 6.1 hours of continuous field operation at ~75% rated power on a full tank (6.6 gal / 25 L).
Estimated 75% Load Fuel Burn~1.1 gal/hr (4.1 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Yanmar F215 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Yanmar F215.
Converted Equivalents:
Horsepower (HP)20.7 hp
Kilowatts (kW)15.4 kW
Metric Horsepower (PS / CV)21 PS
Direct Competitor Comparison
Compare Yanmar F215 against same-era industry alternatives in the same horsepower class.
Current Model
Yanmar
Yanmar F215
Engine Power:Diesel (listed): 20.7 hp / 15.4 kW
★ Baseline Reference
Related models
Yanmar AF-17
- Power:
- 16.8
- Production years:
- 1992 - 1992
Yanmar AF-170
- Power:
- 16.8
- Production years:
- 1997 - 2000
Yanmar F175
- Power:
- 17
- Production years:
- 1983 - 1987
Yanmar FX17
- Power:
- 17
- Production years:
- 1983 - 1985
Yanmar Ke-170H
- Power:
- 17










