Yanmar FX215

The Yanmar FX215 is a tractor produced by Yanmar. It is equipped with a 85.1 ci 1.4 L engine. The listed engine power is Diesel (listed): 20.7 hp / 15.4 kW. Transmission: 9 forward and 3 reverse. Operating weight: 2050 to 2238 pounds.

Engine Power
Diesel (listed): 20.7 hp / 15.4 kW
Fuel & Capacities
6.6 gal 25.0 L
Transmission
9 forward and 3 reverse
Operating Weight
2050 to 2238 pounds

Overview

Yanmar FX215 tractor photo
1987 - 1992 Compact Utility tractor
Production
Manufacturer
Yanmar
Compact Utility tractor
Variants
F215
2WD gear
F215D
4WD gear
FX215
2WD power shift
FX215D
4WD power shift
Yanmar FX215 Engine
Yanmar 1.4L 3-cyl diesel
Fuel tank
6.6 gal 25.0 L
Engine details ...
Yanmar FX215 Transmission
9-speed partial power shift
Transmission details ...
Yanmar FX215 Power
Engine
20.7 hp 15.4 kW
Mechanical
Two- or four-wheel drive
Open operator station.
Tractor hitch
Rear Type
JIS1
Power Take-off (PTO)
Rear PTO Type
540 (1.375)
Engine RPM
574@2500
698@2500
958@2500
1293@2500
Dimensions & Tires
2WD Wheelbase
59.5 inches 151 cm
4WD Wheelbase
60 inches 152 cm
Weight
2050 to 2238 pounds
Front tire
4.00-12
2WD Rear tire
9.5-22
Full dimensions and tires ...
Electrical
Ground
negative
Charging system
alternator
Charging amps
16
Battery volts
12
Battery AH
75
References
FX215 references literature
F195/FX195/F215/FX215/F235/FX235/F255/FX255/F265/FX265 (4) published in 1987

Engine

Engine Detail — 85.1 ci / 1.4 L Diesel

Manufacturer
Yanmar 3TNB82
Fuel Type
Diesel
Configuration
3-cylinder, liquid-cooled
Displacement
85.1 ci 1.4 L
Bore/Stroke
3.23x3.46 inches 82 x 88 mm
Power
20.7 hp 15.4 kW
Rated RPM
2500
Starter volts
12

Transmission

Transmission — 9 forward and 3 reverse partial power shift

Type
partial power shift
Gears
9 forward and 3 reverse
Three gears, plus reverse, in three ranges.
FX215  partial power shift speeds

Dimensions

Yanmar FX215 Tires
2WD Standard tires (ag)
Front: 4.00-12. Rear: 9.5-22
4WD Standard tires (ag)
Front: 6-14. Rear: 9.5-22
Dimensions
2WD Wheelbase
59.5 inches 151 cm
4WD Wheelbase
60 inches 152 cm
Length
111.8 inches 283 cm
Width
48.8 inches 123 cm
Height
56.9 inches 144 cm
2WD Weight
2050 lbs 929 kg
4WD Weight
2238 lbs 1015 kg
2WD Ground clearance
11.7 inches 29 cm
4WD Ground clearance
11 inches 27 cm
2WD Front tread
35.8 inches 90 cm
4WD Front tread
40.2 inches 102 cm
Rear tread
38.2/42.9 inches 97/108 cm

Photos

Yanmar FX215 tractor photo

Yanmar FX215 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Yanmar FX215 based on its 20.7 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
1 to 2 Bottom (12")1 - 2 铧 (30 cm)Light DutyIdeal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing
4 ft (48 in)1.2 mLight DutyPasture clipping and light brush under 1" diameter.
Rotary TillerSeedbed Prep
42 to 48 in105 - 120 cmLight DutyCovers compact tractor tire width.
Disc HarrowSecondary Tillage
5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)Light DutySmall acreage soil break-up and secondary aeration.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Yanmar FX215.

Estimated Continuous Field Runtime: 6.1 hrs

Approximately 6.1 hours of continuous field operation at ~75% rated power on a full tank (6.6 gal / 25 L).

Estimated 75% Load Fuel Burn~1.1 gal/hr (4.1 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Yanmar FX215 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Yanmar FX215.

Converted Equivalents:

Horsepower (HP)20.7 hp
Kilowatts (kW)15.4 kW
Metric Horsepower (PS / CV)21 PS

Direct Competitor Comparison

Compare Yanmar FX215 against same-era industry alternatives in the same horsepower class.

Current Model
Yanmar

Yanmar FX215

Engine Power:Diesel (listed): 20.7 hp / 15.4 kW
★ Baseline Reference
KubotaMarket Competitor

Kubota A-195

Engine Power:18.7
Production Years:1992 - 1996
CaseIHMarket Competitor

CaseIH 1120

Engine Power:19
Production Years:1991 - 1991
FordMarket Competitor

Ford 1310

Engine Power:19
Production Years:1983 - 1986
IsekiMarket Competitor

Iseki TL1901

Engine Power:18.7
Production Years:1980 - 1985