Zetor Proxima Power 105

The Zetor Proxima Power 105 is a tractor produced by Zetor. It is equipped with a 253.6 ci 4.2 L engine. The listed engine power is Diesel (net): 100 hp / 74.6 kW. Transmission: 24 forward and reverse. Operating weight: 8818 lbs 3999 kg.

Engine Power

Diesel (net): 100 hp / 74.6 kW

Fuel & Capacities

46.2 gal 174.9 L

Transmission

24 forward and reverse

Operating Weight

8818 lbs 3999 kg

Overview

	2009 - 2010 Proxima SeriesUtility tractor Proxima Series Utility tractor

Production
Manufacturer	Zetor
Utility tractor
Built in Brno, Czech Republic

Zetor Proxima Power 105 Engine
Zetor 4.2L 4-cyl diesel
Fuel tank	46.2 gal 174.9 L
Engine details ...

Zetor Proxima Power 105 Transmission
24-speed three-speed power shift
Transmission details ...

Zetor Proxima Power 105 Power
Engine (net)	100 hp 74.6 kW

Mechanical
Four-wheel drive
Differential lock	electro-pneumatic
Power steering
Hydraulic wet disc brakes
Trailer brakes	pneumatic
	hydraulic OptOptional
Cab standard with optional air-conditioning.

Hydraulics
Pressure	2611 psi 180.0 bar
Valves	3
Total flow	13.2 gpm 50.0 lpm

Tractor hitch
Rear Type	II/I
Control	position control and mechanical top-link draft sensing
Rear lift	9330 lbs 4232 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	wet disc
Rear PTO Type	540/1000
	540/540E
Front PTO Type	1000

Dimensions & Tires
Wheelbase	91.7 inches 232 cm
Weight	8818 lbs 3999 kg
Front tire	11.2-24
Rear tire	16.9-30
Full dimensions and tires ...

Electrical
Charging system	alternator

Engine

Engine Detail — 253.6 ci / 4.2 L Diesel

Manufacturer	Zetor 1305
Configuration	turbocharged diesel, 4-cylinder 8-valve, liquid-cooled
Displacement	253.6 ci 4.2 L
Bore/Stroke	4.13x4.72 inches 105 x 120 mm
Emissions	Stage III
Rated Power (net)	100 hp 74.6 kW
Rated RPM	2200
Starter type	electric

Transmission

Transmission — 24 forward and reverse three-speed power shift

Type	three-speed power shift
Gears	24 forward and reverse
Clutch	electro-hydraulic wet disc

Dimensions

Zetor Proxima Power 105 Tires
Standard tires (ag)	Front: 11.2-24. Rear: 16.9-30

Dimensions
Wheelbase	91.7 inches 232 cm
Length	153.7 inches 390 cm
Width	75.2 inches 191 cm
Height	107 inches 271 cm
Weight	8818 lbs 3999 kg
Ground clearance	16.5 inches 41 cm

Photos

Zetor Proxima Power 105 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Zetor Proxima Power 105 based on its 100 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Zetor Proxima Power 105.

Estimated Continuous Field Runtime: 8.9 hrs

Approximately 8.9 hours of continuous field operation at ~75% rated power on a full tank (46.2 gal / 174.9 L).

Estimated 75% Load Fuel Burn~5.2 gal/hr (19.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours