AGCO Allis 9675
The AGCO Allis 9675 is a tractor produced by Agco Allis. It is equipped with a 530 ci 8.7 L engine. The listed engine power is 176.44 hp 131.6 kW. Transmission: 18 forward and 9 reverse. Operating weight: 15000 to 18764 pounds.
Engine Power
176.44 hp
131.6 kW
Fuel & Capacities
91 gal
344.4 L
Transmission
18 forward and 9 reverse
Operating Weight
15000 to 18764 pounds
Overview
 | 1994 - 1998
9600 SeriesRow-Crop tractor
9600 Series
Row-Crop tractor |
|---|
Production | |
|---|---|
Manufacturer | AGCO Allis |
Row-Crop tractor | |
Original price was $90,000 in 1998 | |
AGCO Allis 9675 Engine | |
|---|---|
Detroit Diesel 8.7L 6-cyl diesel | |
Fuel tank | 91 gal
344.4 L |
Engine details ...  | |
AGCO Allis 9675 Transmission | |
|---|---|
18-speed full power shift | |
Transmission details ...  |
AGCO Allis 9675 Power | |
|---|---|
PTO (claimed) | 175 hp
130.5 kW |
Drawbar (tested) | 149 hp
111.1 kW |
PTO (tested) | 191.97 hp
143.2 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Final drives | inboard planetary |
Differential lock | electro-hydraulic rear |
Power steering | |
Hydraulic wet disc brakes | |
Cab standard with air-conditioning. | |
Hydraulics | |
|---|---|
Type | closed center |
Pressure | 2500 psi
172.4 bar |
Rear valves | 3 or 4 |
Pump flow | 26 gpm
98.4 lpm |
Tractor hitch | |
|---|---|
Rear Type | III/II |
Control | lower-link draft sensing |
Rear lift (at 24"/610mm) | 8500 lbs
3855 kg |
9900 lbsOptOptional
4490 kg | |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Clutch | hydraulic wet disc |
Rear PTO Type | 1000 (1.75) |
Engine RPM | 1000@2083 |
Dimensions & Tires | |
|---|---|
2WD Wheelbase | 123.2 inches
312 cm |
4WD Wheelbase | 116.5 inches
295 cm |
Weight | 15000 to 18764 pounds |
Front tire | 11.00-16 |
2WD Rear tire | 20.8R38 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Batteries | 2 |
Battery volts | 12 |
References | |
|---|---|
 | |
9600/9800 Series Tractors published by AGCO |
Engine
Engine Detail — 530 ci / 8.7 L Diesel
Manufacturer | Detroit Diesel 40 |
Configuration | turbocharged diesel, 6-cylinder, liquid-cooled inline |
Displacement | 530 ci
8.7 L |
Bore/Stroke | 4.59x5.35 inches
117 x 136 mm |
Pre-heating | ether injection |
Rated RPM | 2200 |
Starter volts | 12 |
Transmission
Transmission — 18 forward and 9 reverse full power shift
Type | full power shift |
Gears | 18 forward and 9 reverse |
Dimensions
AGCO Allis 9675 Tires | |
|---|---|
2WD Standard tires (ag) | Front: 11.00-16. Rear: 20.8R38 |
4WD Standard tires (ag) | Front: 16.9R28. Rear: 20.8R38 |
Dimensions | |
|---|---|
2WD Wheelbase | 123.2 inches
312 cm |
4WD Wheelbase | 116.5 inches
295 cm |
Bar rear axle | 3.875 by 96 inches
98 by 2438 mm |
Bar rear axle | 3.875 by 115 inches
98 by 2921 mm |
2WD Front tread | 65 to 89 inches
165 to 226 cm |
4WD Front tread | 59.7 to 91.4 inches
151 to 232 cm |
Rear tread | 62 to 107.1 inches
157 to 272 cm |
Rear tread | 62 to 126 inches
157 to 320 cm |
AGCO Allis 9675 Weight | |
|---|---|
2WD Shipping | 15000 lbs
6804 kg |
4WD Shipping | 17425 lbs
7903 kg |
4WD Operating | 18764 lbs
8511 kg |
Tests
OCED Tractor Test 1699 | |
|---|---|
Diesel 18-speed 4WD
September 20 - 28, 1995
Link: OCED Tractor Test 1699 file | |
PTO performance | |
Max power | 191.97 hp
143.2 kW |
Fuel use | 11.1 gal/hour
42.0 l/hour |
Power at rated engine speed | 176.44 hp
131.6 kW |
Fuel use | 11.3 gal/hour
42.8 l/hour |
Power at rated PTO speed | 184.44 hp
137.5 kW |
Fuel use | 11.2 gal/hour
42.4 l/hour |
Drawbar performance | |
Max power | 149 hp
111.1 kW |
Fuel use | 11.2 gal/hour
42.4 l/hour |
Gear 10 used for power test. | |
Max pull | 17654 lbs
8007 kg |
Gear 5 used for pull test. | |
Photos
AGCO Allis 9675 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Agco Allis 9675 based on its 176.44 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 5 to 7 Bottom (18")5 - 7 铧 (45 cm) | Commercial / Field Scale | Large acreage tillage; requires front ballast weights. |
Rotary Cutter / MowerMowing & Clearing | 15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼 | Commercial / Field Scale | Large commercial field and roadside mowing operations. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m) | Commercial / Field Scale | High-capacity commercial forage harvesting (1000 RPM PTO). |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Agco Allis 9675.
Estimated Continuous Field Runtime: 9.9 hrs
Approximately 9.9 hours of continuous field operation at ~75% rated power on a full tank (91 gal / 344.5 L).
Estimated 75% Load Fuel Burn~9.2 gal/hr (34.7 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Agco Allis 9675 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Agco Allis 9675.
Converted Equivalents:
Horsepower (HP)176.4 hp
Kilowatts (kW)131.6 kW
Metric Horsepower (PS / CV)178.9 PS
Direct Competitor Comparison
Compare AGCO Allis 9675 against same-era industry alternatives in the same horsepower class.
Current Model
Agco Allis
AGCO Allis 9675
Engine Power:176.44 hp
131.6 kW
★ Baseline Reference
Related models
AGCO Allis 7650
- Power:
- 146.7
- Production years:
- 1991 - 1994
AGCO Allis 9130
- Power:
- 150
- Production years:
- 1991 - 1992
AGCO Allis 9435
- Power:
- 150
- Production years:
- 1994 - 1997
AGCO Allis 9630
- Power:
- 150
- Production years:
- 1993 - 1995
AGCO Allis 9635
- Power:
- 150
- Production years:
- 1994 - 1997