Belarus 1005
The Belarus 1005 is a tractor produced by Belarus. It is equipped with a 289.8 ci 4.7 L engine. The listed engine power is Diesel (listed): 100 hp / 74.6 kW. Transmission: 18 forward and 4 reverse. Operating weight: 8874 lbs 4025 kg.
Engine Power
Diesel (listed): 100 hp / 74.6 kW
Fuel & Capacities
34.3 gal
129.8 L
Transmission
18 forward and 4 reverse
Operating Weight
8874 lbs
4025 kg
Overview
 | 1995 - 1996
1000 SeriesRow-Crop tractor
1000 Series
Row-Crop tractor |
|---|
Production | |
|---|---|
Manufacturer | Belarus |
Row-Crop tractor | |
Built in Minsk, Belarus | |
Variants | |
|---|---|
1005 | 2WD |
1025 | 4WD |
Belarus 1005 Engine | |
|---|---|
Belarus 4.7L 4-cyl diesel | |
Engine details ...  |
Belarus 1005 Transmission | |
|---|---|
18-speed | |
Transmission details ...  |
Belarus 1005 Power | |
|---|---|
Engine | 100 hp
74.6 kW |
PTO (claimed) | 92 hp
68.6 kW |
Mechanical | |
|---|---|
Two-wheel drive | |
Final drives | spur gear |
Differential lock | hydraulic |
Power steering | |
Mechanical disc brakes | |
Cab standard. | |
Capacity | |
|---|---|
Fuel | 34.3 gal
129.8 L |
Hydraulic system | 5.4 gal
20.4 L |
Hydraulics | |
|---|---|
Type | open center |
Capacity | 5.4 gal
20.4 L |
Pressure | 2250 psi
155.1 bar |
Valves | 2 or 3 |
Pump flow | 11.9 gpm
45.0 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Control | position and draft control |
Rear lift (at ends) | 4366 lbs
1980 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 (1.375) |
Engine RPM | 540@1632 |
1000@1673 | |
Dimensions & Tires | |
|---|---|
Wheelbase | 98.4 inches
249 cm |
Weight | 8874 lbs
4025 kg |
Front tire | 9.50x20 |
Rear tire | 16.9x38 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Charging system | alternator |
Charging amps | 50 |
Battery volts | 12 |
References | |
|---|---|
 | |
1005 - 1025 published by Belarus |
Engine
Engine Detail — 289.8 ci / 4.7 L Diesel
Manufacturer | Belarus |
Configuration | turbocharged diesel, 4-cylinder, liquid-cooled |
Displacement | 289.8 ci
4.7 L |
Bore/Stroke | 4.33x4.92 inches
110 x 125 mm |
Power | 100 hp
74.6 kW |
Fuel system | direct injection |
Air cleaner | oil bath |
Compression | 16:1 |
Rated RPM | 1800 |
Starter | electric |
Starter volts | 24 |
Oil capacity | 15.8 qts
15.0 L |
Coolant capacity | 21.1 qts
20.0 L |
Transmission
Transmission — 18 forward and 4 reverse
Gears | 18 forward and 4 reverse |
Clutch | dry disc |
Oil capacity | 42.2 qts
39.9 L |
With 16.9-38 rear tires. | |
 | |
Dimensions
Belarus 1005 Tires | |
|---|---|
Standard tires (ag) | Front: 9.50x20. Rear: 16.9x38 |
Dimensions | |
|---|---|
Wheelbase | 98.4 inches
249 cm |
Length | 163.2 inches
414 cm |
Width | 78 inches
198 cm |
Height | 113 inches
287 cm |
Shipping weight | 8874 lbs
4025 kg |
Clearance (front axle) | 25.4 inches
64 cm |
Clearance (rear axle) | 18.3 inches
46 cm |
Front tread | 57.1 to 72.8 inches
145 to 184 cm |
Rear tread | 57.5 to 82.7 inches
146 to 210 cm |
Recommended Implements & Sizing Guide
Engineering recommendations for Belarus 1005 based on its 100 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Belarus 1005.
Estimated Continuous Field Runtime: 6.6 hrs
Approximately 6.6 hours of continuous field operation at ~75% rated power on a full tank (34.3 gal / 129.8 L).
Estimated 75% Load Fuel Burn~5.2 gal/hr (19.7 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Belarus 1005 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Belarus 1005.
Converted Equivalents:
Horsepower (HP)100 hp
Kilowatts (kW)74.6 kW
Metric Horsepower (PS / CV)101.4 PS
Direct Competitor Comparison
Compare Belarus 1005 against same-era industry alternatives in the same horsepower class.
Current Model
Belarus
Belarus 1005
Engine Power:Diesel (listed): 100 hp / 74.6 kW
★ Baseline Reference
Related models
Belarus MTZ-80
- Power:
- 80
- Production years:
- 1975 - 1977
Belarus MTZ-800
- Power:
- 80
- Production years:
- 1977 - 1983
Belarus MTZ-82
- Power:
- 80
- Production years:
- 1975 - 1977
Belarus MTZ-820
- Power:
- 80
- Production years:
- 1977 - 1983
Belarus 8011
- Power:
- 81
- Production years:
- 1997 - 1998