Belarus 8011
The Belarus 8011 is a tractor produced by Belarus. It is equipped with a 289.8 ci 4.7 L engine. The listed engine power is Diesel (listed): 81 hp / 60.4 kW. Transmission: 14 forward and 4 reverse. Operating weight: 7700 lbs 3492 kg.
Engine Power
Diesel (listed): 81 hp / 60.4 kW
Fuel & Capacities
34 gal
128.7 L
Transmission
14 forward and 4 reverse
Operating Weight
7700 lbs
3492 kg
Overview
 | 1997 - 1998
8000 SeriesRow-Crop tractor
8000 Series
Row-Crop tractor |
|---|
Production | |
|---|---|
Manufacturer | Belarus |
Row-Crop tractor | |
Built in Minsk, Belarus | |
Original price | 19000 (1998) |
Variants | |
|---|---|
8011L | low-profile |
8045 | 4WD ROPS |
8311 | 2WD cab |
8345 | 4WD cab |
Belarus 8011 Engine | |
|---|---|
Belarus 4.7L 4-cyl diesel | |
Engine details ...  |
Belarus 8011 Transmission | |
|---|---|
14-speed partially synchronized | |
Transmission details ...  |
Belarus 8011 Power | |
|---|---|
Engine | 81 hp
60.4 kW |
PTO (claimed) | 75 hp
55.9 kW |
Drawbar (tested) | 68.19 hp
50.8 kW |
PTO (tested) | 75.40 hp
56.2 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Two-wheel drive | |
ROPS. |
Capacity | |
|---|---|
Fuel | 34 gal
128.7 L |
Hydraulic system | 5.75 gal
21.8 L |
Hydraulics | |
|---|---|
Type | open |
Capacity | 5.75 gal
21.8 L |
Valves | 2 |
Pump flow | 12 gpm
45.4 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Rear lift (at ends) | 4,366 lbs
1980 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 |
Engine RPM | 540@2106 |
1000@2310 | |
Dimensions & Tires | |
|---|---|
Wheelbase | 93.7 inches
237 cm |
Weight | 7700 lbs
3492 kg |
Front tire | 9.00-20 |
Rear tire | 16.9-38 |
Full dimensions and tires ...  | |
Engine
Engine Detail — 289.8 ci / 4.7 L Diesel
Manufacturer | Belarus D243C |
Fuel Type | Diesel |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 289.8 ci
4.7 L |
Bore/Stroke | 4.33x4.92 inches
110 x 125 mm |
Power | 81 hp
60.4 kW |
Fuel system | direct injection |
Air cleaner | oil bath |
Compression | 16:1 |
Rated RPM | 2200 |
Starter volts | 24 |
Oil capacity | 16 qts
15.1 L |
Coolant capacity | 20 qts
18.9 L |
Transmission
Transmission — 14 forward and 4 reverse partially synchronized
Type | partially synchronized |
Gears | 14 forward and 4 reverse |
Oil capacity | 42 qts
39.7 L |
Seven gears (1-7) in two ranges (low/high). Synchronized shifting in gears three to seven. | |
Dimensions
Belarus 8011 Tires | |
|---|---|
Ag front | 9.00-20 |
Ag rear | 16.9-38 |
Dimensions | |
|---|---|
Wheelbase | 93.7 inches
237 cm |
Weight | 7700 lbs
3492 kg |
Tests
OCED Tractor Test 1742 | |
|---|---|
Diesel 14-speed 2WD
October 23 - November 7, 1997
Link: OCED Tractor Test 1742 file | |
PTO performance | |
Power at rated engine speed | 75.40 hp
56.2 kW |
Fuel use | 5.0 gal/hour
18.9 l/hour |
Drawbar performance | |
Max power | 68.19 hp
50.8 kW |
Fuel use | 4.1 gal/hour
15.5 l/hour |
Gear 4H used for power test. | |
Max pull | 70,43 lbs
3194 kg |
Gear 2H used for pull test. | |
Photos
Belarus 8011 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Belarus 8011 based on its 81 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Belarus 8011.
Estimated Continuous Field Runtime: 8.1 hrs
Approximately 8.1 hours of continuous field operation at ~75% rated power on a full tank (34 gal / 128.7 L).
Estimated 75% Load Fuel Burn~4.2 gal/hr (15.9 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Belarus 8011 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Belarus 8011.
Converted Equivalents:
Horsepower (HP)81 hp
Kilowatts (kW)60.4 kW
Metric Horsepower (PS / CV)82.1 PS
Direct Competitor Comparison
Compare Belarus 8011 against same-era industry alternatives in the same horsepower class.
Current Model
Belarus
Belarus 8011
Engine Power:Diesel (listed): 81 hp / 60.4 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 734
Engine Power:73
Production Years:1972 - 1974
Related models
Belarus 500
- Power:
- 65
- Production years:
- 1978 - 1981
Belarus 505
- Power:
- 65
- Production years:
- 1983 - 1990
Belarus 506
- Power:
- 65
- Production years:
- 1989 - 1996
Belarus 520
- Power:
- 65
- Production years:
- 1979 - 1991
Belarus 525
- Power:
- 65
- Production years:
- 1983 - 1996