Belarus Agross 806

The Belarus Agross 806 is a tractor produced by Belarus. It is equipped with a 289.8 ci 4.7 L engine. The listed engine power is Engine Detail — 289.8 ci / 4.7 L (listed): 100 hp / 74.6 kW. Transmission: 18 forward and 4 reverse. Operating weight: 8,600 lbs 3900 kg.

Engine Power

Engine Detail — 289.8 ci / 4.7 L (listed): 100 hp / 74.6 kW

Fuel & Capacities

29.1 gal 110.1 L

Transmission

18 forward and 4 reverse

Operating Weight

8,600 lbs 3900 kg

Overview

	1988 - 1998 Agross Series

Production
Manufacturer	Belarus

Variants
826	4WD

Belarus 806 Engine
4.7L 4-cyl
Fuel tank	29.1 gal 110.1 L
Engine details ...

Belarus 806 Transmission
18-speed
Transmission details ...

Belarus 806 Power
Engine	100 hp 74.6 kW

Mechanical
Two-wheel drive
Steering	hydrostatic power
Disc brakes
standard

Hydraulics
Total flow	13.2 gpm 50.0 lpm

Tractor hitch
Rear lift	7,056 lbs 3200 kg

Power Take-off (PTO)
Rear PTO Type	540/1000/ground

Dimensions & Tires
Wheelbase	96.5 inches 245 cm
Weight	8,600 lbs 3900 kg
Front tire	9.00-20
Rear tire	15.5-38
Full dimensions and tires ...

Engine

Engine Detail — 289.8 ci / 4.7 L

Manufacturer	D242
Configuration	turbo, 4-cylinder
Displacement	289.8 ci 4.7 L
Bore/Stroke	4.331x4.921 inches 110 x 125 mm
Power	100 hp 74.6 kW
Rated RPM	2200
Torque	236.0 lb-ft 320.0 Nm
Torque RPM	1050

Transmission

Transmission — 18 forward and 4 reverse

Gears

18 forward and 4 reverse

Dimensions

Belarus 806 Tires
Ag front	9.00-20
Ag rear	15.5-38

Dimensions
Wheelbase	96.5 inches 245 cm
Length	159.1 inches 404 cm
Height	110.6 inches 280 cm
Weight	8,600 lbs 3900 kg

Recommended Implements & Sizing Guide

Engineering recommendations for Belarus Agross 806 based on its 100 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Belarus Agross 806.

Estimated Continuous Field Runtime: 5.6 hrs

Approximately 5.6 hours of continuous field operation at ~75% rated power on a full tank (29.1 gal / 110.2 L).

Estimated 75% Load Fuel Burn~5.2 gal/hr (19.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours