CaseIH Farmall 100CL

The CaseIH Farmall 100CL is a tractor produced by Caseih. It is equipped with a 219.4 ci 3.6 L engine. The listed engine power is Diesel (listed): 98 hp / 73.1 kW. Transmission: 32 forward and 16 reverse.

Engine Power

Diesel (listed): 98 hp / 73.1 kW

Fuel & Capacities

19.8 gal 74.9 L

Transmission

32 forward and 16 reverse

Overview

	2024 - CL SeriesOrchard/Vineyard tractor
2024 -
CL Series
Orchard/Vineyard tractor

Production
Manufacturer	CaseIH (a part of CNH)
Orchard/Vineyard tractor

CaseIH Farmall 100CL Engine
3.6L 4-cyl diesel
Cab Fuel tank	19.8 gal 74.9 L
ROPS Fuel tank	17.2 gal 65.1 L
Exhaust fluid (DEF)	3.6 gal 13.6 L
Engine details ...

CaseIH Farmall 100CL Power
Engine	98 hp 73.1 kW
PTO (claimed)	87 hp 64.9 kW

Mechanical
Four-wheel drive
ROPS. Cab optional.

Hydraulics
Valves	3
Pump flow	16.9 gpm 64.0 lpm
	21 gpmOptOptional 79.5 lpm

Tractor hitch
Rear Type	II
Rear lift	1433 lbs 650 kg

Power Take-off (PTO)
Rear PTO Type	540 (1.375)
Mid PTO Type	2000

Dimensions & Tires
Wheelbase	65.9 inches 167 cm
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Battery volts	12

Engine

Engine Detail — 219.4 ci / 3.6 L Diesel

Configuration	turbocharged aftercooled diesel, 4-cylinder, liquid-cooled
Displacement	219.4 ci 3.6 L
Bore/Stroke	4.02x4.33 inches 102 x 110 mm
Emissions	Tier IV
Power	98 hp 73.1 kW
Rated RPM	2300
Starter	electric
Starter volts	12

Transmission

Transmission options
16-speed power shuttle
32-speed partial power shift

Transmission — 16 forward and reverse power shuttle

Type	power shuttle
Gears	16 forward and reverse
Clutch	wet disc

Transmission — 32 forward and 16 reverse partial power shift

Type	partial power shift
Gears	32 forward and 16 reverse
Clutch	wet disc

Dimensions

CaseIH Farmall 100CL Tires

Dimensions
Wheelbase	65.9 inches 167 cm

Recommended Implements & Sizing Guide

Engineering recommendations for Caseih Farmall 100CL based on its 98 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Caseih Farmall 100CL.

Estimated Continuous Field Runtime: 3.9 hrs

Approximately 3.9 hours of continuous field operation at ~75% rated power on a full tank (19.8 gal / 75 L).

Estimated 75% Load Fuel Burn~5.1 gal/hr (19.3 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours