CaseIH Farmall 100N

The CaseIH Farmall 100N is a tractor produced by Caseih. It is equipped with a 207 ci 3.4 L engine. The listed engine power is Diesel (gross): 98 hp / 73.1 kW. Transmission: 32 forward and 16 reverse. Operating weight: 5498 to 6292 pounds.

Engine Power

Diesel (gross): 98 hp / 73.1 kW

Fuel & Capacities

19 gal 71.9 L

Transmission

32 forward and 16 reverse

Operating Weight

5498 to 6292 pounds

Overview

	2017 - Farmall N SeriesOrchard/Vineyard tractor
2017 -
Farmall N Series
Orchard/Vineyard tractor

Production
Manufacturer	CaseIH
Orchard/Vineyard tractor
Original price	$64,404 (2019 Syncro ROPS 2WD )
	$80,565 (2019 Hi-Lo Cab 4WD )

CaseIH Farmall 100N Engine
FPT 3.4L 4-cyl diesel
Fuel tank	19 gal 71.9 L
Engine details ...

CaseIH Farmall 100N Power
Engine (gross)	98 hp 73.1 kW
PTO (claimed)	86 hp 64.1 kW

Mechanical
Two- or four-wheel drive
Final drives	inboard planetary
Power steering
Wet disc brakes
Two-post ROPS. Cab optional with air-conditioning.

Hydraulics
Type	open center
Rear valves	2 or 3
Mid valves	2 OptOptional
Pump flow	16.9 gpm 64.0 lpm
	21.1 gpm*Optional with cab. 79.9 lpm
Steering flow	11.4 gpm 43.1 lpm

Tractor hitch
Rear Type	II/I
Rear lift (at ends)	5732 lbs 2600 kg
Rear lift (at 24"/610mm)	3780 lbs 1714 kg
Front Hitch	optional

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/540E
	540/1000 OptOptional

Dimensions & Tires
Wheelbase	96 inches 243 cm
Weight	5498 to 6292 pounds
Front tire	6.00-16
2WD Rear tire	14.9R28
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	120
Battery volts	12

Engine

Engine Detail — 207 ci / 3.4 L Diesel

Manufacturer	FPT
Configuration	turbocharged aftercooled diesel, 4-cylinder, liquid-cooled
Displacement	207 ci 3.4 L
Bore/Stroke	3.90x4.33 inches 99 x 110 mm
Emissions	Interim Tier IV
Power (gross)	98 hp 73.1 kW
Fuel system	electronic high-pressure common rail
Rated RPM	2300
Starter	electric
Starter volts	12

Transmission

Transmission options
16-speed partially synchronized
16-speed power shift
32-speed Hi-Lo power shift

Transmission — 16 forward and reverse partially synchronized

Type	partially synchronized
Gears	16 forward and reverse
Four synchronized gears in four non-synchronized ranges with mechanical shuttle.

Transmission — 16 forward and reverse power shift

Type	power shift
Gears	16 forward and reverse

Transmission — 32 forward and 16 reverse Hi-Lo power shift

Type	Hi-Lo power shift
Gears	32 forward and 16 reverse

Dimensions

CaseIH Farmall 100N Tires
2WD Standard tires (ag)	Front: 6.00-16. Rear: 14.9R28
4WD Standard tires (ag)	Front: 7.50R18. Rear: 14.9R28

Dimensions
Wheelbase	96 inches 243 cm
ROPS Length	148.8 inches 377 cm
Cab Length	159 inches 403 cm
Width	52.9 inches 134 cm
Height (ROPS)	90 inches 228 cm
Height (cab)	91.7 inches 232 cm
Ground clearance	11.2 inches 28 cm
Flange rear axle

CaseIH Farmall 100N Weight
2WD Cab	5772 lbs 2618 kg
2WD ROPS	5498 lbs 2493 kg
4WD Cab	6292 lbs 2854 kg
4WD ROPS	6085 lbs 2760 kg

Photos

CaseIH Farmall 100N tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Caseih Farmall 100N based on its 98 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Caseih Farmall 100N.

Estimated Continuous Field Runtime: 3.7 hrs

Approximately 3.7 hours of continuous field operation at ~75% rated power on a full tank (19 gal / 71.9 L).

Estimated 75% Load Fuel Burn~5.1 gal/hr (19.3 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours