CaseIH Farmall 105N

The CaseIH Farmall 105N is a tractor produced by Caseih. It is equipped with a 274 ci 4.5 L engine. The listed engine power is Diesel (gross): 106 hp / 79.0 kW. Transmission: 32 forward and 16 reverse. Operating weight: 5820 lbs (ROPS) 2639 kg.

Engine Power

Diesel (gross): 106 hp / 79.0 kW

Fuel & Capacities

20 gal 75.7 L

Transmission

32 forward and 16 reverse

Operating Weight

5820 lbs (ROPS) 2639 kg

Overview

	2014 - 2016 Farmall N SeriesOrchard/Vineyard tractor Farmall N Series Orchard/Vineyard tractor

Production
Manufacturer	CaseIH
Orchard/Vineyard tractor
Original price was $53,125 in 2014 with ROPS

CaseIH Farmall 105N Engine
FPT 4.5L 4-cyl diesel
Fuel tank	20 gal 75.7 L
Engine details ...

CaseIH Farmall 105N Power
Engine (gross)	106 hp 79.0 kW
PTO (claimed)	92 hp 68.6 kW

Mechanical
Four-wheel drive
Final drives	inboard planetary
Differential lock	electro-hydraulic
Steering	hydrostatic power
Hydraulic wet disc brakes
Two-post foldable mid ROPS. Cab optional with air-conditioning.

Hydraulics
Type	open center
Rear valves	2 or 3
Pump flow	16.9 gpm 64.0 lpm
Total flow	26.4 gpm 99.9 lpm
Steering flow	9.2 gpm 34.8 lpm

Tractor hitch
Rear Type	II
Control	lower link draft sensing
Rear lift (at 24"/610mm)	4400 lbs 1995 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	hydraulic dry disc
Rear PTO Type	540
	540/1000

Dimensions & Tires
Wheelbase	85.6 inches 217 cm
Weight	5820 to 6107 pounds
Front tire	7.50R18
Rear tire	14.9R28
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	120
Battery CCA	800
Battery volts	12

Engine

Engine Detail — 274 ci / 4.5 L Diesel

Manufacturer	FPT
Configuration	turbocharged intercooled diesel, 4-cylinder, liquid-cooled
Displacement	274 ci 4.5 L
Bore/Stroke	4.095x5.20 inches 104 x 132 mm
Emissions	Tier III
Power (gross)	106 hp 79.0 kW
Fuel system	mechanical direct injection
Rated RPM	2300
Starter	electric
Starter volts	12

Transmission

Transmission options
16-speed mechanical shuttle
16-speed power shuttle
32-speed power shuttle

Transmission — 16 forward and reverse mechanical shuttle

Type	mechanical shuttle
Gears	16 forward and reverse
Clutch	dry disc
Four speeds in four ranges with synchronized shuttle shifting.

Transmission — 16 forward and reverse power shuttle

Type	power shuttle
Gears	16 forward and reverse
Clutch	wet disc

Transmission — 32 forward and 16 reverse power shuttle

Type	power shuttle
Gears	32 forward and 16 reverse
Clutch	wet disc

Dimensions

CaseIH Farmall 105N Tires
Ag front	7.50R18
Ag rear	14.9R28
	380/85R28

Dimensions
Wheelbase	85.6 inches 217 cm
Width	53.4 inches (min) 135 cm
Weight	5820 lbs (ROPS) 2639 kg
	6107 lbs (Cab) 2770 kg
Flange rear axle

CaseIH Farmall 105N Height
Hood	51 inches 129 cm
ROPS	91.6 inches 232 cm
Cab	90.7 inches 230 cm

Photos

CaseIH Farmall 105N tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Caseih Farmall 105N based on its 106 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Caseih Farmall 105N.

Estimated Continuous Field Runtime: 3.6 hrs

Approximately 3.6 hours of continuous field operation at ~75% rated power on a full tank (20 gal / 75.7 L).

Estimated 75% Load Fuel Burn~5.5 gal/hr (20.9 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours