CaseIH Farmall 110M

The CaseIH Farmall 110M is a tractor produced by Caseih. It is equipped with a 207 ci 3.4 L engine. The listed engine power is Diesel (listed): 110 hp / 82.0 kW. Transmission: ActiveDrive 4.

Engine Power

Diesel (listed): 110 hp / 82.0 kW

Transmission

ActiveDrive 4

Overview

	2024 - Farmall M SeriesUtility tractor
2024 -
Farmall M Series
Utility tractor

Production
Manufacturer	CaseIH
Utility tractor

CaseIH Farmall 110M Engine
FPT 3.4L 4-cyl diesel
Engine details ...

CaseIH Farmall 110M Transmission
16-speed partial power shift
Transmission details ...

CaseIH Farmall 110M Power
Engine	110 hp 82.0 kW
PTO (claimed)	93 hp 69.4 kW

Mechanical
Four-wheel drive
Power steering
Cab standard with air-conditioning.

Tractor hitch
Control	electronic draft control
Rear lift	8809 lbs 3995 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/1000

Dimensions & Tires
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Battery volts	12

Engine

Engine Detail — 207 ci / 3.4 L Diesel

Manufacturer	FPT
Configuration	turbocharged intercooled diesel, 4-cylinder, liquid-cooled
Displacement	207 ci 3.4 L
Bore/Stroke	3.898x4.331 inches 99 x 110 mm
Emissions	Tier IV
Power	110 hp 82.0 kW
Starter	electric
Starter volts	12

Transmission

Transmission — ActiveDrive 4

Transmission	ActiveDrive 4
Type	partial power shift
Gears	16 forward and reverse

Dimensions

CaseIH Farmall 110M Tires

Dimensions

Photos

CaseIH Farmall 110M tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Caseih Farmall 110M based on its 110 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Caseih Farmall 110M.

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours