CaseIH JX80

The CaseIH JX80 is a tractor produced by Caseih. It is equipped with a 238.5 ci 3.9 L engine. The listed engine power is Diesel (gross): 72 hp / 53.7 kW. Transmission: 20 forward and 12 reverse. Operating weight: 5702 to 6915 pounds.

Engine Power
Diesel (gross): 72 hp / 53.7 kW
Fuel & Capacities
23.8 gal 90.1 L
Transmission
20 forward and 12 reverse
Operating Weight
5702 to 6915 pounds

Overview

CaseIH JX80 tractor photo
2007 - 2008 JX SeriesUtility tractorTurk Tractor built JX Series Utility tractor Turk Tractor built
Production
Distributor
CaseIH
Manufacturer
Turk Tractor
Utility tractor
Built in Ankara, Turkey
CaseIH JX80 Engine
Iveco 3.9L 4-cyl diesel
Fuel tank
23.8 gal 90.1 L
Engine details ...
CaseIH JX80 Power
Engine (gross)
72 hp 53.7 kW
PTO (claimed)
62 hp 46.2 kW
Mechanical
Two- or four-wheel drive
Differential lock
mechanical rear
Steering
hydrostatic power
Brakes
hydraulic wet disc (USA)
mechanical wet disc
Two-post folding ROPS. Cab optional with air-conditioning.
Hydraulics
Type
open center
Pressure
2755 psi 190.0 bar
Valves
1 to 3, 1 mid optional
Pump flow
10.6 gpm 40.1 lpm
13.6 gpm (optional, standard in USA) 51.5 lpm
Total flow
21.7 gpm 82.1 lpm
Steering flow
8.1 gpm 30.7 lpm
Tractor hitch
Rear Type
II/I
Control
mechanical draft sensing
Rear lift (at 24"/610mm)
5,025 lbs 2279 kg
Power Take-off (PTO)
Rear PTO
independent
Clutch
mechanical dry disc
Rear PTO Type
540
540/540E
540/1000
Dimensions & Tires
Wheelbase
91 inches (2WD) 231 cm
87 inches (4WD) 220 cm
Weight
5702 to 6915 pounds
Full dimensions and tires ...
Electrical
Ground
negative
Charging system
alternator
Charging amps
85
Battery volts
12
References
JX80 references literature
JX published in 2007, by CaseIH
JX Series published in 2010, by CaseIH

Engine

Engine Detail — 238.5 ci / 3.9 L Diesel

Manufacturer
Iveco
Fuel Type
Diesel
Configuration
4-cylinder, liquid-cooled
Displacement
238.5 ci 3.9 L
Bore/Stroke
4.094x4.528 inches 104 x 115 mm
Power (gross)
72 hp 53.7 kW
Fuel system
direct injection with mechanical governor
Air cleaner
dual dry elements
Rated RPM
2500
Torque
205.8 lb-ft 279.1 Nm
Torque RPM
1500
Starter
electric
Starter volts
12

Transmission

Transmission options
12-speed mechanical shuttle
20-speed mechanical shuttle with creeper

Transmission — 12 forward and reverse mechanical shuttle

Type
mechanical shuttle
Gears
12 forward and reverse
Three ranges with four gears per range. Left-hand reverser requires use of clutch to change directions
Transmission
Type
mechanical shuttle with creeper
Gears
20 forward and 12 reverse

Dimensions

CaseIH JX80 Tires
Dimensions
Wheelbase
91 inches (2WD) 231 cm
87 inches (4WD) 220 cm
Length
158.7 inches (2WD) 403 cm
156.5 inches (4WD) 397 cm
Width
71.2 inches 180 cm
Height (ROPS)
101.1 inches 256 cm
Height (cab)
103.1 inches 261 cm
CaseIH JX80 Weight
Shipping
5,702 lbs (2WD ROPS) 2586 kg
6,363 lbs (4WD ROPS) 2886 kg
6,254 lbs (2WD cab) 2836 kg
6,915 lbs (4WD cab) 3136 kg

Photos

Case IH JX80 with L730 front-end loader.

Case IH JX80 with L730 front-end loader.

Recommended Implements & Sizing Guide

Engineering recommendations for Caseih JX80 based on its 72 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
3 to 4 Bottom (16")3 - 4 铧 (40 cm)Heavy DutySuitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing
7 to 8 ft (84-96 in)2.1 - 2.4 mHeavy DutyHeavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep
78 to 84 in200 - 215 cmHeavy DutyHeavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage
7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙Medium DutyField leveling and clod breaking behind plows.
Hay BalerHay & Forage
4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机Heavy DutySilage and dry hay; 540 RPM PTO with slip-clutch.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Caseih JX80.

Estimated Continuous Field Runtime: 6.4 hrs

Approximately 6.4 hours of continuous field operation at ~75% rated power on a full tank (23.8 gal / 90.1 L).

Estimated 75% Load Fuel Burn~3.7 gal/hr (14.2 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Caseih JX80 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Caseih JX80.

Converted Equivalents:

Horsepower (HP)72 hp
Kilowatts (kW)53.7 kW
Metric Horsepower (PS / CV)73 PS

Direct Competitor Comparison

Compare CaseIH JX80 against same-era industry alternatives in the same horsepower class.

Current Model
Caseih

CaseIH JX80

Engine Power:Diesel (gross): 72 hp / 53.7 kW
★ Baseline Reference
Massey FergusonMarket Competitor

Massey Ferguson 174

Engine Power:65
Production Years:1973 - 1983
DeereMarket Competitor

Deere 3200

Engine Power:65
Production Years:1995 - 1998
FendtMarket Competitor

Fendt 365GTA

Engine Power:65
Production Years:1998 - 2004
Deutz-FahrMarket Competitor

Deutz-Fahr 4.07

Engine Power:65
Production Years:1991 - 1995