CaseIH Luxxum 100

The CaseIH Luxxum 100 is a tractor produced by Caseih. It is equipped with a 207 ci 3.4 L engine. The listed engine power is Diesel (gross): 99 hp / 73.8 kW. Transmission: 32 forward and reverse. Operating weight: 9678 lbs 4389 kg.

Engine Power

Diesel (gross): 99 hp / 73.8 kW

Fuel & Capacities

39.6 gal 149.9 L

Transmission

32 forward and reverse

Operating Weight

9678 lbs 4389 kg

Overview

	2016 - 2025 Model year 2016-20222022-2025 Luxxum SeriesUtility tractor Luxxum Series Utility tractor

Production
Manufacturer	CaseIH
Utility tractor
Built in Saint Valentin, Austria

CaseIH Luxxum 100 Engine
FPT 3.4L 4-cyl diesel
Fuel tank	39.6 gal 149.9 L
Exhaust fluid (DEF)	3.7 gal 14.0 L
Engine details ...

CaseIH Luxxum 100 Transmission
32-speed four-speed power shift
Transmission details ...

CaseIH Luxxum 100 Power
Engine (gross)	99 hp 73.8 kW

Mechanical
Four-wheel drive
Differential lock	electro-hydraulic front and rear
Power steering
Wet disc brakes
Cab standard with air-conditioning.

Hydraulics
Type	closed center load sensing
Rear valves	4 OptOptional
Mid valves	2 OptOptional
Pump flow	21.1 gpm 79.9 lpm
	26.4 gpmOptOptional 99.9 lpm

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/540E/1000/1000E
Front PTO	independent
Front PTO Type	540/540E/1000/1000E

Dimensions & Tires
Wheelbase	95.3 inches 242 cm
	95.7 inches (suspended axle) 243 cm
Weight	9678 lbs 4389 kg
Front tire	480/65R24
Rear tire	540/65R38
Full dimensions and tires ...

Electrical
Charging system	alternator

References

Luxxum published in 2016, by CaseIH

Engine

Engine Detail — 207 ci / 3.4 L Diesel

Manufacturer	FPT
Configuration	turbocharged diesel, 4-cylinder, liquid-cooled
Displacement	207 ci 3.4 L
Bore/Stroke	3.90x4.33 inches 99 x 110 mm
Emissions	Stage IV
Rated Power (gross)	99 hp 73.8 kW
Rated RPM	2200
Torque	317 lb-ft 429.9 Nm
Torque RPM	1500
Starter	electric
Starter volts	12

CaseIH Luxxum 100 Engine

Transmission

Transmission — 32 forward and reverse four-speed power shift

Type	four-speed power shift
Gears	32 forward and reverse

Dimensions

CaseIH Luxxum 100 Tires
Standard tires (ag)	Front: 480/65R24. Rear: 540/65R38

Dimensions
Wheelbase	95.3 inches 242 cm
	95.7 inches (suspended axle) 243 cm
Length	165.2 inches 419 cm
Width	82.7 inches 210 cm
Height (cab)	107.1 inches 272 cm
Shipping weight	9678 lbs 4389 kg
Max weight	17637 lbs 8000 kg

Photos

CaseIH Luxxum 100 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Caseih Luxxum 100 based on its 99 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Caseih Luxxum 100.

Estimated Continuous Field Runtime: 7.7 hrs

Approximately 7.7 hours of continuous field operation at ~75% rated power on a full tank (39.6 gal / 149.9 L).

Estimated 75% Load Fuel Burn~5.1 gal/hr (19.5 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours