CaseIH MXU100
The CaseIH MXU100 is a tractor produced by Caseih. It is equipped with a 273.7 ci 4.5 L engine. The listed engine power is Diesel (gross): 100 hp / 74.6 kW. Transmission: 12 forward and reverse. Operating weight: 9060 to 11200 pounds.
Engine Power
Diesel (gross): 100 hp / 74.6 kW
Fuel & Capacities
46.7 gal
176.8 L
Transmission
12 forward and reverse
Operating Weight
9060 to 11200 pounds
Overview
 | 2004 - 2006
MXU Maxxum SeriesUtility tractor
MXU Maxxum Series
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | CaseIH |
Utility tractor | |
Built in Basildon, England | |
Original price was $39,100 in 2005 | |
Variants | |
|---|---|
TS100A | similar New Holland model |
CaseIH MXU100 Engine | |
|---|---|
CNH 4.5L 4-cyl diesel | |
Fuel tank | 46.7 gal
176.8 L |
Engine details ...  | |
CaseIH MXU100 Power | |
|---|---|
Engine (gross) | 100 hp
74.6 kW |
PTO (claimed) | 80 hp
59.7 kW |
Drawbar (tested) | 74.7 hp
55.7 kW |
PTO (tested) | 87.7 hp
65.4 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Final drives | planetary inboard |
Differential lock | electro-hydraulic rear standard |
front optional | |
Power steering | |
Differential hydraulic wet disc brakes | |
Cab optional | |
Hydraulics | |
|---|---|
Type | pressure-flow compensated optional (PFC) |
Pressure | 2974 psi
205.1 bar |
3118 psi (PFC)
215.0 bar | |
Rear valves | 2 to 4 |
Pump flow | 19.8 gpm
74.9 lpm |
26.5 gpm (PFC)
100.3 lpm | |
Total flow | 30.3 gpm
114.7 lpm |
37 gpm (PFC)
140.0 lpm | |
Steering flow | 10.5 gpm
39.7 lpm |
Tractor hitch | |
|---|---|
Rear Type | II (ROPS) |
II/IIIN (cab) | |
Control | mechanical lower link (ROPS) |
electronic draft control (cab) | |
Rear lift | 9,285 lbs
4211 kg |
12,185 lbs (with cab)
5527 kg | |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Clutch | electro-hydraulic wet plates |
Rear PTO Type | 540/1000 |
Engine RPM | 540@1969 |
1000@2120 | |
Dimensions & Tires | |
|---|---|
2WD Wheelbase | 93.3 inches
236 cm |
4WD Wheelbase | 94.9 inches
241 cm |
Weight | 9060 to 11200 pounds |
Front tire | 7.50x16 |
2WD Rear tire | 16.9R38 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
ROPS Charging amps | 70 |
Cab Charging amps | 120 |
Battery CCA | 1300 |
Battery volts | 12 |
References | |
|---|---|
 | |
MXU Series Maxxum Tractors published in 2004, by CaseIH | |
MXU Series Maxxum Tractors published in 2005, by CaseIH |
Engine
Engine Detail — 273.7 ci / 4.5 L Diesel
Manufacturer | CNH |
Configuration | turbocharged intercooled diesel, 4-cylinder, liquid-cooled |
Displacement | 273.7 ci
4.5 L |
Bore/Stroke | 4.094x5.196 inches
104 x 132 mm |
Power (gross) | 100 hp
74.6 kW |
Fuel system | Bosch mechanical direct injection with 6-hole injectors |
Air cleaner | dual paper elements |
Pre-heating | grid heater |
Compression | 17.0:1 |
Rated RPM | 2200 |
Starter volts | 12 |
CaseIH MXU100 Engine | |
|---|---|
 |
Transmission
Transmission options | |
|---|---|
24-speed partial powershift | |
16-speed partial powershift | |
12-speed |
Transmission — 24 forward and reverse partial powershift
Type | partial powershift |
Gears | 24 forward and reverse |
Clutch | electro-hydraulic wet discs |
Four gears (1-4) in three ranges (I-II-III) with low-high power shift. Gears and ranges are synchronized. | |
Transmission — 16 forward and reverse partial powershift
Type | partial powershift |
Gears | 16 forward and reverse |
Clutch | electro-hydraulic wet discs |
Four gears (1-4) in four ranges (A-D). Power shift between gears. Auto Shift feature automatically matches shifts within selected range to match load. | |
 | |
Transmission — 12 forward and reverse
Gears | 12 forward and reverse |
Four gears (1-4) in three ranges (I-II-III). | |
 | |
Dimensions
CaseIH MXU100 Tires | |
|---|---|
2WD Standard tires (ag) | Front: 7.50x16. Rear: 16.9R38 |
4WD Standard tires (ag) | Front: 14.9R24. Rear: 16.9R38 |
Dimensions | |
|---|---|
2WD Wheelbase | 93.3 inches
236 cm |
4WD Wheelbase | 94.9 inches
241 cm |
CaseIH MXU100 Weight | |
|---|---|
Shipping | 9,060 lbs (2WD ROPS)
4109 kg |
10,008 lbs (2WD cab)
4539 kg | |
9,435 lbs (4WD ROPS)
4279 kg | |
10,383 lbs (4WD cab)
4709 kg | |
Operating | 11,200 lbs (4WD cab)
5080 kg |
CaseIH MXU100 Height | |
|---|---|
ROPS | 112.4 inches
285 cm |
Cab | 112.4 inches
285 cm |
115 inches (suspended cab)
292 cm | |
Exhaust | 113.2 inches
287 cm |
Tests
OCED Tractor Test 2242 | |
|---|---|
Diesel 12-speed 4WD
November 1, 2004 - January 1, 2005
Link: OCED Tractor Test 2242 file | |
PTO performance | |
Max power | 87.7 hp
65.4 kW |
Fuel use | 5.5 gal/hour
20.8 l/hour |
Power at rated engine speed | 86.9 hp
64.8 kW |
Fuel use | 5.8 gal/hour
22.0 l/hour |
Power at rated PTO speed | 87.2 hp
65.0 kW |
Fuel use | 5.7 gal/hour
21.6 l/hour |
Drawbar performance | |
Max power | 74.7 hp
55.7 kW |
Fuel use | 5.8 gal/hour
22.0 l/hour |
Gear 2-II used for power test. | |
Max pull | 12,050 lbs
5465 kg |
Gear 1-I used for pull test. | |
Attachments
Attachment overview | |
|---|---|
CaseIH LX156 loader |
Photos
CaseIH MXU100
Recommended Implements & Sizing Guide
Engineering recommendations for Caseih MXU100 based on its 100 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Caseih MXU100.
Estimated Continuous Field Runtime: 9 hrs
Approximately 9 hours of continuous field operation at ~75% rated power on a full tank (46.7 gal / 176.8 L).
Estimated 75% Load Fuel Burn~5.2 gal/hr (19.7 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Caseih MXU100 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Caseih MXU100.
Converted Equivalents:
Horsepower (HP)100 hp
Kilowatts (kW)74.6 kW
Metric Horsepower (PS / CV)101.4 PS
Direct Competitor Comparison
Compare CaseIH MXU100 against same-era industry alternatives in the same horsepower class.
Current Model
Caseih
CaseIH MXU100
Engine Power:Diesel (gross): 100 hp / 74.6 kW
★ Baseline Reference
Related models
CaseIH 844 XL
- Power:
- 80
- Production years:
- 1985 - 1987
CaseIH JX1080U
- Power:
- 80
- Production years:
- 2004 - 2008
CaseIH JX1085C
- Power:
- 80
- Production years:
- 2005 - 2008
CaseIH JX90
- Power:
- 82
- Production years:
- 2007 - 2008
CaseIH 885XL
- Power:
- 83
- Production years:
- 1985 - 1990