CaseIH Puma 130
The CaseIH Puma 130 is a tractor produced by Caseih. It is equipped with a 410.6 ci 6.7 L engine. The listed engine power is Diesel (gross): 131 hp / 97.7 kW. Transmission: EconoGear. Operating weight: 13600 lbs 6168 kg.
Engine Power
Diesel (gross): 131 hp / 97.7 kW
Fuel & Capacities
71 gal
268.7 L
Transmission
EconoGear
Operating Weight
13600 lbs
6168 kg
Overview
 | 2011 - 2013
Puma SeriesRow-Crop tractor
Puma Series
Row-Crop tractor |
|---|
Production | |
|---|---|
Manufacturer | CaseIH |
Row-Crop tractor | |
CaseIH Puma 130 Engine | |
|---|---|
FPT 6.7L 6-cyl diesel | |
Engine details ...  |
CaseIH Puma 130 Power | |
|---|---|
Engine (gross) | 131 hp
97.7 kW |
Engine (max) | 171 hp
127.5 kW |
PTO (claimed) | 105 hp
78.3 kW |
Drawbar (tested) | 98.4 hp
73.4 kW |
PTO (tested) | 134.6 hp
100.4 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Four-wheel drive | |
Cab standard. Optional cab suspension. |
Capacity | |
|---|---|
Fuel | 71 gal
268.7 L |
86 gal (optional)
325.5 L | |
Exhaust fluid (DEF) | 12.7 gal
48.1 L |
Hydraulic system | 19.5 gal
73.8 L |
Hydraulics | |
|---|---|
Type | closed center pressure flow compensating (PFC) |
Capacity | 19.5 gal
73.8 L |
Rear valves | 3 to 4 (mechanical) |
3 to 5 (electronic) | |
Pump flow | 29 gpm
109.8 lpm |
32 gpm (optional)
121.1 lpm | |
Tractor hitch | |
|---|---|
Rear Type | 2/3N |
Rear lift | 7,900 lbs
3583 kg |
9,200 lbs (optional)
4173 kg | |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 (1.375) |
Dimensions & Tires | |
|---|---|
Wheelbase | 107.6 inches
273 cm |
109.8 inches (suspended front axle)
278 cm | |
Weight | 13600 lbs
6168 kg |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 150 |
200 OptOptional | |
Batteries | 2 |
Battery CCA | 650 |
Battery volts | 12 |
References | |
|---|---|
 | |
Puma Series Tractors published in 2010, by CaseIH | |
Puma Series Tractors published in 2011, by CaseIH |
Engine
Engine Detail — 410.6 ci / 6.7 L Diesel
Manufacturer | FPT |
Configuration | turbocharged diesel, 6-cylinder, liquid-cooled |
Displacement | 410.6 ci
6.7 L |
Bore/Stroke | 4.094x5.197 inches
104 x 132 mm |
Emissions | Interim Tier 4 |
Emission control | selective catalytic reduction (SCR) |
Rated Power (gross) | 131 hp
97.7 kW |
Maximum Power (gross) | 171 hp
127.5 kW |
Rated RPM | 2200 |
Starter | electric |
Starter volts | 12 |
Oil capacity | 16 qts
15.1 L |
Transmission
Transmission options | |
|---|---|
18-speed full power shift | |
19-speed full power shift | |
continuously variable transmission (CVT) |
Transmission — 18 forward and 6 reverse full power shift
Type | full power shift |
Gears | 18 forward and 6 reverse |
Clutch | electro-hydraulic wet disc |
Transmission — EconoGear
Transmission | EconoGear |
Type | full power shift |
Gears | 19 forward and 6 reverse |
Clutch | electro-hydraulic wet disc |
Adds transport gear to the power shift, providing road speed at reduced engine RPMs. | |
Transmission — infinite forward and reverse continuously variable transmission (CVT)
Type | continuously variable transmission (CVT) |
Gears | infinite forward and reverse |
 | |
Dimensions
CaseIH Puma 130 Tires |
|---|
Dimensions | |
|---|---|
Wheelbase | 107.6 inches
273 cm |
109.8 inches (suspended front axle)
278 cm | |
Operating weight | 13600 lbs
6168 kg |
Flange rear axle | |
Bar rear axle | 3.625 by 98 inches
92 by 2489 mm |
Bar rear axle | 3.625 by 112 inches
92 by 2844 mm |
Front tread | 61.4 to 88.8 inches
155 to 225 cm |
Tests
OCED Tractor Test 2644 | |
|---|---|
Diesel 18-speed 4WD
April 2011 - June 2011,
Link: OCED Tractor Test 2644 file | |
PTO performance | |
Max power | 134.6 hp
100.4 kW |
Fuel use | 7.2 gal/hour
27.3 l/hour |
Power at rated engine speed | 124.0 hp
92.5 kW |
Fuel use | 7.1 gal/hour
26.9 l/hour |
Power at rated PTO speed | 132.1 hp
98.5 kW |
Fuel use | 7.2 gal/hour
27.3 l/hour |
Drawbar performance | |
Max power | 98.4 hp
73.4 kW |
Fuel use | 7.0 gal/hour
26.5 l/hour |
Gear 10 used for power test. | |
Max pull | 12230 lbs
5547 kg |
Gear 8 used for pull test. | |
Photos
CaseIH Puma 130 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Caseih Puma 130 based on its 131 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Caseih Puma 130.
Estimated Continuous Field Runtime: 10.4 hrs
Approximately 10.4 hours of continuous field operation at ~75% rated power on a full tank (71 gal / 268.8 L).
Estimated 75% Load Fuel Burn~6.8 gal/hr (25.8 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Caseih Puma 130 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Caseih Puma 130.
Converted Equivalents:
Horsepower (HP)131 hp
Kilowatts (kW)97.7 kW
Metric Horsepower (PS / CV)132.8 PS
Direct Competitor Comparison
Compare CaseIH Puma 130 against same-era industry alternatives in the same horsepower class.
Current Model
Caseih
CaseIH Puma 130
Engine Power:Diesel (gross): 131 hp / 97.7 kW
★ Baseline Reference
Related models
CaseIH 1056 XL
- Power:
- 105
- Production years:
- 1985 - 1992
CaseIH 5130
- Power:
- 105
- Production years:
- 1990 - 1997
CaseIH Farmall 105U
- Power:
- 105
- Production years:
- 2008 - 2016
CaseIH 1896
- Power:
- 105.6
- Production years:
- 1985 - 1989
CaseIH Farmall 105C
- Power:
- 106
- Production years:
- 2013 - 2015