CaseIH Steiger 535

The CaseIH Steiger 535 is a tractor produced by Caseih. It is equipped with a 915 ci 15.0 L engine. The listed engine power is Diesel (listed): 535 hp / 398.9 kW. Transmission: 16 forward and 2 reverse. Operating weight: 42,639 lbs 19341 kg.

Engine Power

Diesel (listed): 535 hp / 398.9 kW

Fuel & Capacities

300 gal 1135.5 L

Transmission

16 forward and 2 reverse

Operating Weight

42,639 lbs 19341 kg

Overview

	2008 - 2010 Four-wheel Drive (4WD) tractor

Production
Manufacturer	CaseIH
Four-wheel Drive (4WD) tractor
Built in Fargo, North Dakota, USA
Original price	$318,437 (2010)

Variants
535 Quadtrac	articulated crawler

CaseIH Steiger 535 Engine
Cummins 15.0L 6-cyl diesel
Fuel tank	300 gal 1135.5 L
Engine details ...

CaseIH Steiger 535 Transmission
16-speed full power shift
Transmission details ...

CaseIH Steiger 535 Power
Engine	535 hp 398.9 kW
PTO (claimed)	473 hp 352.7 kW

Mechanical
Four-wheel drive
Hydraulic wet disc brakes
Cab standard with heat and A/C, optional Luxury cab

Hydraulics
Type	parallel pressure flow compensated (PFC)
Valves	4 to 5
	4 to 9 (without 3-point hitch)
Total flow	42 gpm 159.0 lpm
	57 gpm (High-Flow) 215.7 lpm
	94 gpm (Twin-Flow) 355.8 lpm

Tractor hitch
Rear Type	4N
Rear lift (at 24"/610mm)	19,620 lbs 8899 kg

Power Take-off (PTO)
Rear PTO	independent optional
Rear PTO Type	1000

Dimensions & Tires
Wheelbase	154 inches 391 cm
Weight	42,639 lbs 19341 kg
Front tire	800/70R38
Rear tire	800/70R38
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	200
Batteries	2
Battery CCA	1000
Battery volts	12

References

Steiger Series Tractors published in 2007, by CaseIH

Engine

Engine Detail — 915 ci / 15.0 L Diesel

Manufacturer	Cummins QSX15
Configuration	turbocharged diesel, 6-cylinder, liquid-cooled
Displacement	915 ci 15.0 L
Bore/Stroke	5.394x6.654 inches 137 x 169 mm
Emissions	Tier 3
Power	535 hp 398.9 kW
Maximum Power	589 hp 439.2 kW
Compression	17:1
Rated RPM	2100
Starter	electric
Starter volts	24
Oil capacity	52 qts 49.2 L

Transmission

Transmission — 16 forward and 2 reverse full power shift

Type	full power shift
Gears	16 forward and 2 reverse

Dimensions

CaseIH Steiger 535 Tires
Ag front	800/70R38
Ag rear	800/70R38

Dimensions
Wheelbase	154 inches 391 cm
Width	44 inches (frame) 111 cm
Front axle	4.5x120 inch diameter 114 mm
Rear axle	4.5x120 inch diameter 114 mm

CaseIH Steiger 535 Weight
Shipping	42,639 lbs 19341 kg
Max capacity	54,000 lbs 24494 kg
Max Drawbar	6,000 lbs 2721 kg
	11,000 lbs (optional) 4989 kg

Photos

CaseIH Steiger 535

Recommended Implements & Sizing Guide

Engineering recommendations for Caseih Steiger 535 based on its 535 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	8+ Bottom On-Land Hitch8+ 铧重型机外牵引犁	Commercial / Field Scale	High horsepower articulated/4WD field plowing.
Rotary Cutter / MowerMowing & Clearing	15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼	Commercial / Field Scale	Large commercial field and roadside mowing operations.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	24 to 36 ft Heavy Duty Field Disc7.3 - 11.0 m 超宽重型整地耙	Commercial / Field Scale	Broad-acre grain tillage for high-drawbar tractors.
Hay BalerHay & Forage	Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m)	Commercial / Field Scale	High-capacity commercial forage harvesting (1000 RPM PTO).

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Caseih Steiger 535.

Estimated Continuous Field Runtime: 10.8 hrs

Approximately 10.8 hours of continuous field operation at ~75% rated power on a full tank (300 gal / 1135.6 L).

Estimated 75% Load Fuel Burn~27.8 gal/hr (105.3 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours