Challenger MT495E

The Challenger MT495E is a tractor produced by Challenger. It is equipped with a 299 ci 4.9 L engine. The listed engine power is Diesel (listed): 150 hp / 111.9 kW. Transmission: TechStar CVT. Operating weight: 15432 lbs 6999 kg.

Engine Power

Diesel (listed): 150 hp / 111.9 kW

Fuel & Capacities

67 gal 253.6 L

Transmission

TechStar CVT

Operating Weight

15432 lbs 6999 kg

Overview

	2017 - 2020 MT400E SeriesUtility tractor MT400E Series Utility tractor

Production
Manufacturer	Challenger (a part of AGCO)
Utility tractor
Built in France

Variants
6716S	similar Massey Ferguson model

Challenger MT495E Engine
AGCO Power 4.9L 4-cyl diesel
Fuel tank	67 gal 253.6 L
Exhaust fluid (DEF)	7.9 gal 29.9 L
Engine details ...

Challenger MT495E Power
Engine	150 hp 111.9 kW
PTO (claimed)	140 hp 104.4 kW
Drawbar (tested)	128.1 hp 95.5 kW
PTO (tested)	138.4 hp 103.2 kW
Performance test details ...

Mechanical
Four-wheel drive
Differential lock	electro-hydraulic front and rear
Power steering
Hydraulic wet disc brakes
Cab standard with air-conditioning. Auto-Guide 3000 ((Optional))

Hydraulics
Type	open center
Valves	up to 5
Pump flow	26 gpm 98.4 lpm
	29 gpmOptOptional 109.8 lpm
	50 gpmOptOptional 189.2 lpm

Tractor hitch
Rear Type	III/II
Rear lift (at 24"/610mm)	11244 lbs 5100 kg
Rear Arms	telescopic link end

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/1000
	540/540E/1000/1000E

Dimensions & Tires
Wheelbase	105 inches 266 cm
Weight	15432 lbs 6999 kg
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	175
	240 *Total charging capacity with optional twin 120A system.
Battery volts	12

References

MT400E Series Tractors published in 2016, by AGCO

Engine

Engine Detail — 299 ci / 4.9 L Diesel

Manufacturer	AGCO Power
Configuration	intercooled turbocharged diesel, 4-cylinder, liquid-cooled
Displacement	299 ci 4.9 L
Bore/Stroke	4.251x5.276 inches 108 x 134 mm
Emissions	Tier IV
Emission control	selective catalytic reduction
Power	150 hp 111.9 kW
Maximum Power	160 hp 119.3 kW
Fuel system	high-pressure common rail direct injection
Rated RPM	2100
Torque	652 lb-ft 884.1 Nm
Torque RPM	1600
Starter	electric
Starter volts	12

Transmission

Transmission options
24-speed six-speed power shift
continuously-variable transmission

Transmission — AutoPower VI

Transmission	AutoPower VI
Type	six-speed power shift
Gears	24 forward and reverse
Clutch	hydraulic wet disc

Transmission — TechStar CVT

Transmission	TechStar CVT
Type	continuously-variable transmission
Gears	infinite forward and reverse

Dimensions

Challenger MT495E Tires

Dimensions
Wheelbase	105 inches 266 cm
Width	72 inches*Minimum width 182 cm
Shipping weight	15432 lbs 6999 kg
Flange rear axle
Bar rear axle

Tests

OCED Tractor Test 3035
Diesel CVT 4WD October 2016 - November 2016, Link: OCED Tractor Test 3035 file
PTO performance
Power at rated engine speed	138.4 hp 103.2 kW
Fuel use	8.5 gal/hour 32.2 l/hour
Power at rated PTO speed	153.5 hp 114.5 kW
Fuel use	8.9 gal/hour 33.7 l/hour
Drawbar performance
Max power	128.1 hp 95.5 kW
Fuel use	9.1 gal/hour 34.4 l/hour
Pull at 7.69KPH
Max pull	15265 lbs 6924 kg
Pull at 3.57KPH

Photos

Challenger MT495E tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Challenger MT495E based on its 150 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	5 to 7 Bottom (18")5 - 7 铧 (45 cm)	Commercial / Field Scale	Large acreage tillage; requires front ballast weights.
Rotary Cutter / MowerMowing & Clearing	15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼	Commercial / Field Scale	Large commercial field and roadside mowing operations.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙	Commercial / Field Scale	Wide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage	Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m)	Commercial / Field Scale	High-capacity commercial forage harvesting (1000 RPM PTO).

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Challenger MT495E.

Estimated Continuous Field Runtime: 8.6 hrs

Approximately 8.6 hours of continuous field operation at ~75% rated power on a full tank (67 gal / 253.6 L).

Estimated 75% Load Fuel Burn~7.8 gal/hr (29.5 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours