Challenger MT535D
The Challenger MT535D is a tractor produced by Challenger. It is equipped with a 402.5 ci 6.6 L engine. The listed engine power is Diesel (listed): 150 hp / 111.9 kW. Transmission: AutoPower VI.
Engine Power
Diesel (listed): 150 hp / 111.9 kW
Fuel & Capacities
82 gal
310.4 L
Transmission
AutoPower VI
Overview
![]() | 2013 - 2014
MT500D SeriesRow-Crop tractor
MT500D Series
Row-Crop tractor |
|---|
Production | |
|---|---|
Manufacturer | Challenger (a part of AGCO) |
Row-Crop tractor | |
Built in Beauvais, France | |
Original price | $134,789 (2013 classic ) |
$157,151 (2013 deluxe ) | |
$165,629 (2013 deluxe ) | |
Variants | |
|---|---|
7616 | similar Massey Ferguson model |
Challenger MT535D Engine | |
|---|---|
AGCO Power 6.6L 6-cyl diesel | |
Fuel tank | 82 gal
310.4 L |
Exhaust fluid (DEF) | 8 gal
30.3 L |
Engine details ... | |
Challenger MT535D Transmission | |
|---|---|
24-speed six-speed power shift | |
Transmission details ... |
Challenger MT535D Power | |
|---|---|
Engine | 150 hp
111.9 kW |
PTO (claimed) | 120 hp
89.5 kW |
Drawbar (tested) | 107.3 hp
80.0 kW |
PTO (tested) | 144.4 hp
107.7 kW |
Performance test details ... | |
Mechanical | |
|---|---|
Four-wheel drive | |
Steering | hydrostatic power |
Hydraulic wet disc brakes | |
Cab standard with air-conditioning. AGCO System 150 (optional); AGCOMMAND (optional) | |
Hydraulics | |
|---|---|
Type | closed center load sensing (CCLS) |
Pressure | 2900 psi
200.0 bar |
Valves | 2 to 4 |
Total flow | 29 gpm
109.8 lpm |
Tractor hitch | |
|---|---|
Rear Type | III/II |
Control | electronic lower link draft control |
Drawbar | Cat. 2 |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 |
540/540E/1000 | |
540E/1000E/1000/1000E | |
Dimensions & Tires | |
|---|---|
Front tire | 380/85R28 |
Rear tire | 460/85R38 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 175 |
240 *Total capacity with dual 120A alternator option. | |
Batteries | 2 |
Battery CCA | 600 |
Battery volts | 12 |
References | |
|---|---|
![]() | |
Challenger MT500D Series published in 2013, by AGCO |
Engine
Engine Detail — 402.5 ci / 6.6 L Diesel
Manufacturer | AGCO Power |
Configuration | turbocharged intercooled diesel, 6-cylinder, liquid-cooled |
Displacement | 402.5 ci
6.6 L |
Bore/Stroke | 4.252x4.724 inches
108 x 120 mm |
Emissions | Interim Tier IV |
Emission control | selective catalyitic reduction (SCR) |
Power | 150 hp
111.9 kW |
Fuel system | electronic high pressure common rail |
Air cleaner | dual stage dry |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — AutoPower VI
Transmission | AutoPower VI |
Type | six-speed power shift |
Gears | 24 forward and reverse |
Dimensions
Challenger MT535D Tires | |
|---|---|
Standard tires (ag) | Front: 380/85R28. Rear: 460/85R38 |
Dimensions | |
|---|---|
Flange rear axle | |
Bar rear axle | 3.23 by 80 inches
82 by 2032 mm |
Long bar rear axle | 3.23 by 105 inches
82 by 2667 mm |
Tests
Tractor Tests | |
|---|---|
OECD 2773: diesel CVT 4WD | |
OECD 2789: diesel AutoPower VI 4WD |
OCED Tractor Test 2773 | |
|---|---|
Diesel CVT 4WD
March 2013 - April 2013,
Link: OCED Tractor Test 2773 file | |
PTO performance | |
Max power | 144.4 hp
107.7 kW |
Fuel use | 8.4 gal/hour
31.8 l/hour |
Power at rated engine speed | 128.9 hp
96.1 kW |
Fuel use | 7.9 gal/hour
29.9 l/hour |
Power at rated PTO speed | 138.7 hp
103.4 kW |
Fuel use | 8.2 gal/hour
31.0 l/hour |
Drawbar performance | |
Max power | 105.5 hp
78.7 kW |
Fuel use | 7.9 gal/hour
29.9 l/hour |
Pull at 7.8KPH | |
Max pull | 15130 lbs
6862 kg |
Pull at 2.96KPH | |
OCED Tractor Test 2789 | |
|---|---|
Diesel AutoPower VI 4WD
November 2012 - July 2013,
Link: OCED Tractor Test 2789 file | |
PTO performance | |
Max power | 141.2 hp
105.3 kW |
Fuel use | 8.0 gal/hour
30.3 l/hour |
Power at rated engine speed | 126.1 hp
94.0 kW |
Fuel use | 7.5 gal/hour
28.4 l/hour |
Power at rated PTO speed | 137.9 hp
102.8 kW |
Fuel use | 7.9 gal/hour
29.9 l/hour |
Drawbar performance | |
Max power | 107.3 hp
80.0 kW |
Fuel use | 7.2 gal/hour
27.3 l/hour |
Gear 3A used for power test. | |
Max pull | 13195 lbs
5985 kg |
Gear 1F used for pull test. | |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for Challenger MT535D based on its 150 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 5 to 7 Bottom (18")5 - 7 铧 (45 cm) | Commercial / Field Scale | Large acreage tillage; requires front ballast weights. |
Rotary Cutter / MowerMowing & Clearing | 15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼 | Commercial / Field Scale | Large commercial field and roadside mowing operations. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m) | Commercial / Field Scale | High-capacity commercial forage harvesting (1000 RPM PTO). |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Challenger MT535D.
Estimated Continuous Field Runtime: 10.5 hrs
Approximately 10.5 hours of continuous field operation at ~75% rated power on a full tank (82 gal / 310.4 L).
Estimated 75% Load Fuel Burn~7.8 gal/hr (29.5 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Challenger MT535D Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Challenger MT535D.
Converted Equivalents:
Horsepower (HP)150 hp
Kilowatts (kW)111.9 kW
Metric Horsepower (PS / CV)152.1 PS
Direct Competitor Comparison
Compare Challenger MT535D against same-era industry alternatives in the same horsepower class.
Current Model
Challenger
Challenger MT535D
Engine Power:Diesel (listed): 150 hp / 111.9 kW
★ Baseline Reference
Related models
Challenger MT465D
- Power:
- 120
- Production years:
- 2014 - 2016
Challenger MT475B
- Power:
- 120
- Production years:
- 2008 - 2013
Challenger MT475D
- Power:
- 130
- Production years:
- 2014 - 2016
Challenger MT475E
- Power:
- 130
- Production years:
- 2017 - 2020
Challenger MT515D
- Power:
- 130
- Production years:
- 2013 - 2014


