Cub Cadet 982

The Cub Cadet 982 is a tractor produced by Cub Cadet Lawn Tractors. It is equipped with a 781 cc 47.7 ci engine. The listed engine power is Gasoline (listed): 19.9 hp / 14.8 kW. Transmission: infinite forward and reverse. Operating weight: 875 lbs 396 kg.

Engine Power
Gasoline (listed): 19.9 hp / 14.8 kW
Fuel & Capacities
4 gal 15.1 L
Transmission
infinite forward and reverse
Operating Weight
875 lbs 396 kg

Overview

Cub Cadet 982 tractor photo
1979 - 1986 Model year 1979-19811982-1986 IH 82 SeriesGarden tractor IH 82 Series Garden tractor
Production
Manufacturer
Cub Cadet (a part of International Harvester)
Garden tractor
Built in Louisville, Kentucky, USA
Cub Cadet 982 Engine
19.9HP Onan 781cc 2-cyl gasoline
Fuel tank
4 gal 15.1 L
Engine details ...
Cub Cadet 982 Transmission
hydrostatic
Transmission details ...
Mechanical
Two-wheel drive
Steering
manual
Differential external disc brakes
Open operator station.
Tractor hitch
Rear Type
0 OptOptional
Power Take-off (PTO)
Rear PTO
independent
Clutch
electric
Rear PTO Type
2000
Front PTO
independent
Clutch
electric
Dimensions & Tires
Wheelbase
51.6 inches 131 cm
Weight
875 lbs 396 kg
Front tire
18x8.50-8
Rear tire
26x12.00-12
Full dimensions and tires ...
Electrical
Ground
negative
Charging system
flywheel alternator
Charging amps
20
Battery CCA
200
Battery volts
12
Battery AH
32
References
982 references literature
International 982 Cadet Tractor published in 1981, by International Harvester
International Cadet Tractors published in 1979, by International Harvester
Buyer's Guide 1981 published by International Harvester
Buyer's Guide 1982 published by International Harvester

Engine

Engine Detail — 781 cc / 47.7 ci Gasoline

Manufacturer
Onan B48G
Fuel Type
Gasoline
Configuration
2-cylinder, air-cooled
Displacement
781 cc 47.7 ci
Bore/Stroke
3.25x2.875 inches 83 x 73 mm
Power
19.9 hp 14.8 kW
Air cleaner
dry with foam pre-cleaner
Rated RPM
3200
Torque
30.86 lb-ft 41.8 Nm
Torque RPM
1629
Starter volts
12
Oil capacity
1.75 qts 1.7 L
Oil change
50 h

Transmission

Transmission — infinite forward and reverse shaft-driven hydrostatic

Type
shaft-driven hydrostatic
Gears
infinite forward and reverse
Oil capacity
3.5 qts 3.3 L
982  shaft-driven hydrostatic speeds
982 Transmission Controls
Cub Cadet 982 transmission controls
1
Brakes
2
Throttle
3
Forward/reverse
4
Left brake
5
Right brake

Dimensions

Cub Cadet 982 Tires
Lawn/turf front
18x8.50-8
Lawn/turf rear
26x12.00-12
Dimensions
Wheelbase
51.6 inches 131 cm
Length
78.5 inches 199 cm
Width
43.5 inches 110 cm
Height (steering wheel)
47.5 inches 120 cm
Shipping weight
875 lbs 396 kg
Ground clearance
7.75 inches 19 cm
Front tread
33 inches 83 cm
Rear tread
31.5 inches 80 cm

Attachments

Attachment overview
50" mid-mount mower deck
60" mid-mount mower deck
Snowblower
Blade
The Cub Cadet 982 was compatible with the model 48 tiller. The model 48 requires both the rear PTO and three-point hitch.

Photos

IH Cub Cadet.

IH Cub Cadet.

IH Cub Cadet.

IH Cub Cadet.

IH Cub Cadet.

IH Cub Cadet.

IH Cub Cadet.

IH Cub Cadet.

IH Cub Cadet.

IH Cub Cadet.

IH Cub Cadet.

IH Cub Cadet.

IH Cub Cadet 982 rear end with three-point hitch and PTO.

IH Cub Cadet 982 rear end with three-point hitch and PTO.

IH Cub Cadet 982 operator station and controls.

IH Cub Cadet 982 operator station and controls.

Recommended Implements & Sizing Guide

Engineering recommendations for Cub Cadet Lawn Tractors Cub Cadet 982 based on its 19.9 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
1 to 2 Bottom (12")1 - 2 铧 (30 cm)Light DutyIdeal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing
4 ft (48 in)1.2 mLight DutyPasture clipping and light brush under 1" diameter.
Rotary TillerSeedbed Prep
42 to 48 in105 - 120 cmLight DutyCovers compact tractor tire width.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Cub Cadet Lawn Tractors Cub Cadet 982.

Estimated Continuous Field Runtime: 3.9 hrs

Approximately 3.9 hours of continuous field operation at ~75% rated power on a full tank (4 gal / 15.1 L).

Estimated 75% Load Fuel Burn~1 gal/hr (3.9 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Cub Cadet Lawn Tractors Cub Cadet 982 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Cub Cadet Lawn Tractors Cub Cadet 982.

Converted Equivalents:

Horsepower (HP)19.9 hp
Kilowatts (kW)14.8 kW
Metric Horsepower (PS / CV)20.2 PS

Direct Competitor Comparison

Compare Cub Cadet 982 against same-era industry alternatives in the same horsepower class.

Current Model
Cub Cadet Lawn Tractors

Cub Cadet 982

Engine Power:Gasoline (listed): 19.9 hp / 14.8 kW
★ Baseline Reference
Massey FergusonMarket Competitor

Massey Ferguson 1215

Engine Power:18
Production Years:1996 - 2003
International HarvesterMarket Competitor

International Harvester 184 Lo-Boy

Engine Power:18
Production Years:1977 - 1980
CaseIHMarket Competitor

CaseIH 235

Engine Power:18
Production Years:1986 - 1990
KubotaMarket Competitor

Kubota B7410

Engine Power:18
Production Years:2004 - 2007