Deutz-Fahr 9290 TTV

The Deutz-Fahr 9290 TTV is a tractor produced by Deutz Fahr. It is equipped with a 474.5 ci 7.8 L engine. The listed engine power is Diesel (gross): 277 hp / 206.6 kW. Operating weight: 26455 lbs 11999 kg.

Engine Power

Diesel (gross): 277 hp / 206.6 kW

Fuel & Capacities

158.5 gal 599.9 L

Operating Weight

26455 lbs 11999 kg

Overview

	2015 - 9 TTV Agrotron SeriesRow-Crop tractor
2015 -
9 TTV Agrotron Series
Row-Crop tractor

Production
Manufacturer	Deutz-Fahr
Row-Crop tractor

Deutz-Fahr 9290 TTV Engine
Deutz 7.8L 6-cyl diesel
Fuel tank	158.5 gal 599.9 L
Exhaust fluid (DEF)	14.5 gal 54.9 L
Engine details ...

Deutz-Fahr 9290 TTV Power
Engine (gross)	277 hp 206.6 kW
Engine (max)	295 hp 220.0 kW

Mechanical
Four-wheel drive
Differential lock	automatic front and rear differential locks
Power steering
Wet disc brakes
MaxiVision II Cab standard with air-conditioning.

Hydraulics
Type	closed center load sensing
Valves	4 to 8
Pump flow	42.3 gpm 160.1 lpm
	55.5 gpm*Optional. 210.1 lpm

Tractor hitch
Rear lift	26455 lbs 11999 kg
Front lift	11023 lbs 5000 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	electro-hydraulic
Rear PTO Type	540E/1000/1000E
Front PTO	independent *Optional.
Clutch	electro-hydraulic
Front PTO Type	1000
	1000E

Dimensions & Tires
Wheelbase	123.4 inches 313 cm
Weight	26455 lbs 11999 kg
Front tire	650/65R34
Rear tire	710/75R42
Full dimensions and tires ...

Electrical
Charging system	alternator
Charging amps	200
Battery volts	12
Battery AH	180

Engine

Engine Detail — 474.5 ci / 7.8 L Diesel

Manufacturer	Deutz TCD 7.8 L06
Configuration	turbocharged intercooled diesel, 6-cylinder, liquid-cooled
Displacement	474.5 ci 7.8 L
Bore/Stroke	4.33x5.35 inches 110 x 136 mm
Rated Power (gross)	277 hp 206.6 kW
Maximum Power (gross)	295 hp 220.0 kW
Fuel system	common rail
Rated RPM	2100
Torque	889 lb-ft 1205.5 Nm
Torque RPM	1500
Starter	electric
Starter volts	12

Transmission

Transmission

Dimensions

Deutz-Fahr 9290 TTV Tires
Standard tires (ag)	Front: 650/65R34. Rear: 710/75R42

Dimensions
Wheelbase	123.4 inches 313 cm
Length	207.4 inches 526 cm
Width	100.4 inches 255 cm
Height (cab)	137.8 inches 350 cm
Weight	26455 lbs 11999 kg
Max weight	39683 lbs 18000 kg
Ground clearance	16.1 inches 40 cm

Photos

Deutz-Fahr 9290 TTV tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Deutz Fahr Deutz-Fahr 9290 TTV based on its 277 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	8+ Bottom On-Land Hitch8+ 铧重型机外牵引犁	Commercial / Field Scale	High horsepower articulated/4WD field plowing.
Rotary Cutter / MowerMowing & Clearing	15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼	Commercial / Field Scale	Large commercial field and roadside mowing operations.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	24 to 36 ft Heavy Duty Field Disc7.3 - 11.0 m 超宽重型整地耙	Commercial / Field Scale	Broad-acre grain tillage for high-drawbar tractors.
Hay BalerHay & Forage	Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m)	Commercial / Field Scale	High-capacity commercial forage harvesting (1000 RPM PTO).

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Deutz Fahr Deutz-Fahr 9290 TTV.

Estimated Continuous Field Runtime: 11 hrs

Approximately 11 hours of continuous field operation at ~75% rated power on a full tank (158.5 gal / 600 L).

Estimated 75% Load Fuel Burn~14.4 gal/hr (54.5 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours

Deutz Fahr Deutz-Fahr 9290 TTV Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Deutz Fahr Deutz-Fahr 9290 TTV.

Enter value:

Unit:

Converted Equivalents:

Horsepower (HP)277 hp

Kilowatts (kW)206.6 kW

Metric Horsepower (PS / CV)280.8 PS

Direct Competitor Comparison

Compare Deutz-Fahr 9290 TTV against same-era industry alternatives in the same horsepower class.

Current Model

Deutz Fahr