Deutz-Fahr Agrotron 260 MK3

The Deutz-Fahr Agrotron 260 MK3 is a tractor produced by Deutz Fahr. It is equipped with a 436 ci 7.1 L engine. The listed engine power is Diesel (listed): 260 hp / 193.9 kW. Transmission: 40 forward and reverse. Operating weight: 19646 lbs 8911 kg.

Engine Power

Diesel (listed): 260 hp / 193.9 kW

Fuel & Capacities

145.3 gal 550.0 L

Transmission

40 forward and reverse

Operating Weight

19646 lbs 8911 kg

Overview

	2001 - 2003 Agrotron SeriesRow-Crop tractor Agrotron Series Row-Crop tractor

Production
Manufacturer	Deutz-Fahr
Row-Crop tractor

Deutz-Fahr Agrotron 260 MK3 Engine
Deutz 7.1L 6-cyl diesel
Fuel tank	145.3 gal 550.0 L
Engine details ...

Deutz-Fahr Agrotron 260 MK3 Transmission
40-speed 4-speed power shift
Transmission details ...

Deutz-Fahr Agrotron 260 MK3 Power
Engine	260 hp 193.9 kW

Mechanical
Four-wheel drive
Power steering
Wet disc brakes
Cab standard with air-conditioning.

Hydraulics
Pump flow	31.7 gpm 120.0 lpm

Tractor hitch
Rear Type	III
Rear lift	23152 lbs 10501 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	1000

Dimensions & Tires
Wheelbase	121.5 inches 308 cm
Weight	19646 lbs 8911 kg
Front tire	18.4R34
Rear tire	20.8R42
Full dimensions and tires ...

References

Agrotron 230 MK3 - 260 MK3 published in 2002, by Deutz-Fahr
Agrotron 230 260 MK3 published in 2004, by Deutz-Fahr

Engine

Engine Detail — 436 ci / 7.1 L Diesel

Manufacturer	Deutz BF6M 1013C
Configuration	turbocharged intercooled diesel, 6-cylinder, liquid-cooled inline
Displacement	436 ci 7.1 L
Bore/Stroke	4.252x5.12 inches 108 x 130 mm
Power	260 hp 193.9 kW
Rated RPM	2350

Transmission

Transmission — 40 forward and reverse 4-speed power shift

Type	4-speed power shift
Gears	40 forward and reverse
Four power shift gears in six ranges with additional four-range creeper.

Dimensions

Deutz-Fahr Agrotron 260 MK3 Tires
Ag front	18.4R34
Ag rear	20.8R42

Dimensions
Wheelbase	121.5 inches 308 cm
Length	202 inches 513 cm
Height	129.8 inches 329 cm
Weight	19646 lbs 8911 kg

Photos

Deutz-Fahr Agrotron 260 MK3 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Deutz Fahr Deutz-Fahr Agrotron 260 MK3 based on its 260 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	8+ Bottom On-Land Hitch8+ 铧重型机外牵引犁	Commercial / Field Scale	High horsepower articulated/4WD field plowing.
Rotary Cutter / MowerMowing & Clearing	15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼	Commercial / Field Scale	Large commercial field and roadside mowing operations.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	24 to 36 ft Heavy Duty Field Disc7.3 - 11.0 m 超宽重型整地耙	Commercial / Field Scale	Broad-acre grain tillage for high-drawbar tractors.
Hay BalerHay & Forage	Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m)	Commercial / Field Scale	High-capacity commercial forage harvesting (1000 RPM PTO).

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Deutz Fahr Deutz-Fahr Agrotron 260 MK3.

Estimated Continuous Field Runtime: 10.7 hrs

Approximately 10.7 hours of continuous field operation at ~75% rated power on a full tank (145.3 gal / 550 L).

Estimated 75% Load Fuel Burn~13.5 gal/hr (51.2 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours

Deutz Fahr Deutz-Fahr Agrotron 260 MK3 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Deutz Fahr Deutz-Fahr Agrotron 260 MK3.

Enter value:

Unit:

Converted Equivalents:

Horsepower (HP)260 hp

Kilowatts (kW)193.9 kW

Metric Horsepower (PS / CV)263.6 PS

Direct Competitor Comparison

Compare Deutz-Fahr Agrotron 260 MK3 against same-era industry alternatives in the same horsepower class.

Current Model

Deutz Fahr