Deutz-Fahr Agrotron 80 MK3

The Deutz-Fahr Agrotron 80 MK3 is a tractor produced by Deutz Fahr. It is equipped with a 194.78 ci 3.2 L engine. The listed engine power is Diesel (listed): 75 hp / 55.9 kW. Transmission: 24 forward and 8 reverse. Operating weight: 9591 lbs 4350 kg.

Engine Power

Diesel (listed): 75 hp / 55.9 kW

Fuel & Capacities

47.6 gal 180.2 L

Transmission

24 forward and 8 reverse

Operating Weight

9591 lbs 4350 kg

Overview

	2001 - 2003 Agrotron SeriesRow-Crop tractor Agrotron Series Row-Crop tractor

Production
Manufacturer	Deutz-Fahr
Row-Crop tractor

Deutz-Fahr Agrotron 80 MK3 Engine
Deutz 3.2L 4-cyl diesel
Fuel tank	47.6 gal 180.2 L
Engine details ...

Deutz-Fahr Agrotron 80 MK3 Transmission
24-speed
Transmission details ...

Deutz-Fahr Agrotron 80 MK3 Power
Engine	75 hp 55.9 kW

Mechanical
Four-wheel drive

Hydraulics
Pump flow	21.9 gpm 82.9 lpm

Tractor hitch
Rear lift	13715 lbs 6221 kg

Power Take-off (PTO)
Rear PTO Type	540, 1000

Dimensions & Tires
Wheelbase	95.28 inches 242 cm
Weight	9591 lbs 4350 kg
Front tire	14.9R24
Rear tire	16.9R34
Full dimensions and tires ...

Engine

Engine Detail — 194.78 ci / 3.2 L Diesel

Manufacturer	Deutz
Configuration	turbo diesel, 4-cylinder
Displacement	194.78 ci 3.2 L
Bore/Stroke	3.70x4.52 inches 94 x 115 mm
Power	75 hp 55.9 kW
Rated RPM	2300

Transmission

Transmission — 24 forward and 8 reverse

Gears

24 forward and 8 reverse

Dimensions

Deutz-Fahr Agrotron 80 MK3 Tires
Ag front	14.9R24
Ag rear	16.9R34

Dimensions
Wheelbase	95.28 inches 242 cm
Length	162.99 inches 413 cm
Height	89.37 inches 226 cm
Weight	9591 lbs 4350 kg

Recommended Implements & Sizing Guide

Engineering recommendations for Deutz Fahr Deutz-Fahr Agrotron 80 MK3 based on its 75 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Deutz Fahr Deutz-Fahr Agrotron 80 MK3.

Estimated Continuous Field Runtime: 12.2 hrs

Approximately 12.2 hours of continuous field operation at ~75% rated power on a full tank (47.6 gal / 180.2 L).

Estimated 75% Load Fuel Burn~3.9 gal/hr (14.8 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours

Deutz Fahr Deutz-Fahr Agrotron 80 MK3 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Deutz Fahr Deutz-Fahr Agrotron 80 MK3.

Enter value:

Unit:

Converted Equivalents:

Horsepower (HP)75 hp

Kilowatts (kW)55.9 kW

Metric Horsepower (PS / CV)76 PS

Direct Competitor Comparison

Compare Deutz-Fahr Agrotron 80 MK3 against same-era industry alternatives in the same horsepower class.

Current Model

Deutz Fahr