Deutz-Fahr D 7007
The Deutz-Fahr D 7007 is a tractor produced by Deutz Fahr. It is equipped with a 230 ci 3.8 L engine. The listed engine power is Diesel (listed): 70 hp / 52.2 kW. Transmission: 12 forward and 4 reverse. Operating weight: 6305 to 7121 pounds.
Engine Power
Diesel (listed): 70 hp / 52.2 kW
Fuel & Capacities
23.8 gal
90.1 L
Transmission
12 forward and 4 reverse
Operating Weight
6305 lbs
2859 kg
Overview
 | 1982 - 1984
07 SeriesUtility tractor
07 Series
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Deutz-Fahr |
Utility tractor | |
Deutz-Fahr D 7007 Engine | |
|---|---|
Deutz 3.8L 4-cyl diesel | |
Fuel tank | 23.8 gal
90.1 L |
Engine details ...  | |
Deutz-Fahr D 7007 Transmission | |
|---|---|
12-speed synchronized | |
Transmission details ...  |
Deutz-Fahr D 7007 Power | |
|---|---|
Engine | 70 hp
52.2 kW |
PTO (claimed) | 68 hp
50.7 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Differential lock | mechanical rear |
Power steering | |
Mechanical drum brakes | |
Four-post ROPS. Cab available with heat. | |
Hydraulics | |
|---|---|
Type | open center |
Pressure | 2538 psi
175.0 bar |
Valves | 1 to 3 |
Pump flow | 17.7 gpm
67.0 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Control | position and draft control |
Rear lift | 5733 lbs
2600 kg |
7276 lbs ((Optional)
3300 kg | |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540 |
540/1000 OptOptional | |
Dimensions & Tires | |
|---|---|
2WD Wheelbase | 85.4 inches
216 cm |
4WD Wheelbase | 87.3 inches
221 cm |
Weight | 6305 to 7121 pounds |
Front tire | 10.00x16 |
2WD Rear tire | 18.4x30 |
Full dimensions and tires ...  | |
Engine
Engine Detail — 230 ci / 3.8 L Diesel
Manufacturer | Deutz F4L 912 |
Fuel Type | Diesel |
Configuration | 4-cylinder, air-cooled |
Displacement | 230 ci
3.8 L |
Bore/Stroke | 3.94x4.72 inches
100 x 120 mm |
Power | 70 hp
52.2 kW |
Rated RPM | 2300 |
Starter type | electric |
Transmission
Transmission — 12 forward and 4 reverse synchronized
Type | synchronized |
Gears | 12 forward and 4 reverse |
Clutch | dry disc |
Dimensions
Deutz-Fahr D 7007 Tires | |
|---|---|
2WD Standard tires (ag) | Front: 10.00x16. Rear: 18.4x30 |
4WD Standard tires (ag) | Front: 11.2x24. Rear: 18.4x30 |
Dimensions | |
|---|---|
2WD Wheelbase | 85.4 inches
216 cm |
4WD Wheelbase | 87.3 inches
221 cm |
Width | 78.3 inches
198 cm |
Height (ROPS) | 100.8 inches
256 cm |
2WD Operating weight | 6305 lbs
2859 kg |
4WD Operating weight | 7121 lbs
3230 kg |
Recommended Implements & Sizing Guide
Engineering recommendations for Deutz Fahr Deutz-Fahr D 7007 based on its 70 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Deutz Fahr Deutz-Fahr D 7007.
Estimated Continuous Field Runtime: 6.5 hrs
Approximately 6.5 hours of continuous field operation at ~75% rated power on a full tank (23.8 gal / 90.1 L).
Estimated 75% Load Fuel Burn~3.6 gal/hr (13.8 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Deutz Fahr Deutz-Fahr D 7007 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Deutz Fahr Deutz-Fahr D 7007.
Converted Equivalents:
Horsepower (HP)70 hp
Kilowatts (kW)52.2 kW
Metric Horsepower (PS / CV)71 PS
Direct Competitor Comparison
Compare Deutz-Fahr D 7007 against same-era industry alternatives in the same horsepower class.
Current Model
Deutz Fahr
Deutz-Fahr D 7007
Engine Power:Diesel (listed): 70 hp / 52.2 kW
★ Baseline Reference
Related models
Deutz-Fahr Intrac 2003
- Power:
- 59
- Production years:
- 1974 - 1979
Deutz-Fahr 4060E Keyline
- Power:
- 59.1
- Production years:
- 2018 - 2026
Deutz-Fahr 3.57
- Power:
- 60
- Production years:
- 1991 - 1995
Deutz-Fahr Agroplus 60
- Power:
- 60
- Production years:
- 2001 - 2004
Deutz-Fahr D 6207
- Power:
- 60
- Production years:
- 1980 - 1984