Deutz-Fahr D 7207
The Deutz-Fahr D 7207 is a tractor produced by Deutz Fahr. It is equipped with a 230 ci 3.8 L engine. The listed engine power is Diesel (listed): 70 hp / 52.2 kW. Transmission: TW56.11. Operating weight: 7121 to 7915 pounds.
Engine Power
Diesel (listed): 70 hp / 52.2 kW
Fuel & Capacities
23.8 gal
90.1 L
Transmission
TW56.11
Operating Weight
7121 to 7915 pounds
Overview
 | 1981 - 1984
07 SeriesUtility tractor
07 Series
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Deutz-Fahr |
Utility tractor | |
Deutz-Fahr D 7207 Engine | |
|---|---|
Deutz 3.8L 4-cyl diesel | |
Fuel tank | 23.8 gal
90.1 L |
Engine details ...  | |
Deutz-Fahr D 7207 Transmission | |
|---|---|
12-speed synchronized | |
Transmission details ...  |
Deutz-Fahr D 7207 Power | |
|---|---|
Engine | 70 hp
52.2 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Power steering | |
Hydraulic drum brakes | |
Four-post ROPS. Cab available with heat. |
Hydraulics | |
|---|---|
Type | open center |
Pump flow | 10.6 gpm
40.1 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Control | position and draft control |
Rear lift | 5732 lbs
2600 kg |
7276 lbsOptOptional
3300 kg | |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 |
Dimensions & Tires | |
|---|---|
2WD Wheelbase | 95 inches
241 cm |
4WD Wheelbase | 95.6 inches
242 cm |
Weight | 7121 to 7915 pounds |
Front tire | 7.50-20 |
2WD Rear tire | 16.9-38 |
Full dimensions and tires ...  | |
Engine
Engine Detail — 230 ci / 3.8 L Diesel
Manufacturer | Deutz F4L 912 |
Fuel Type | Diesel |
Configuration | 4-cylinder, air-cooled |
Displacement | 230 ci
3.8 L |
Bore/Stroke | 3.94x4.72 inches
100 x 120 mm |
Power | 70 hp
52.2 kW |
Rated RPM | 2300 |
Starter type | electric |
Transmission
Transmission — TW56.11
Transmission | TW56.11 |
Type | synchronized |
Gears | 12 forward and 4 reverse |
Four gears (1-4) in three ranges (L/M/H) plus reverse (R) range. | |
 | |
Dimensions
Deutz-Fahr D 7207 Tires | |
|---|---|
2WD Standard tires (ag) | Front: 7.50-20. Rear: 16.9-38 |
4WD Standard tires (ag) | Front: 12.4-24. Rear: 16.9-34 |
Dimensions | |
|---|---|
2WD Wheelbase | 95 inches
241 cm |
4WD Wheelbase | 95.6 inches
242 cm |
2WD Length | 158.3 inches
402 cm |
4WD Length | 158.7 inches
403 cm |
Width | 82.3 inches
209 cm |
Height (cab) | 101.2 inches
257 cm |
2WD Ground clearance | 20.9 inches
53 cm |
4WD Ground clearance | 16.9 inches
42 cm |
2WD Front tread | 58.3 to 78 inches
148 to 198 cm |
4WD Front tread | 59.1/70.9 inches
150/180 cm |
Rear tread | 59.8 to 79.5 inches
151 to 201 cm |
Deutz-Fahr D 7207 Weight | |
|---|---|
2WD Cab Operating | 7121 lbs
3230 kg |
4WD Cab Operating | 7915 lbs
3590 kg |
Max capacity | 11023 lbs
5000 kg |
Photos
Deutz-Fahr D7207C.
Recommended Implements & Sizing Guide
Engineering recommendations for Deutz Fahr Deutz-Fahr D 7207 based on its 70 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Deutz Fahr Deutz-Fahr D 7207.
Estimated Continuous Field Runtime: 6.5 hrs
Approximately 6.5 hours of continuous field operation at ~75% rated power on a full tank (23.8 gal / 90.1 L).
Estimated 75% Load Fuel Burn~3.6 gal/hr (13.8 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Deutz Fahr Deutz-Fahr D 7207 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Deutz Fahr Deutz-Fahr D 7207.
Converted Equivalents:
Horsepower (HP)70 hp
Kilowatts (kW)52.2 kW
Metric Horsepower (PS / CV)71 PS
Direct Competitor Comparison
Compare Deutz-Fahr D 7207 against same-era industry alternatives in the same horsepower class.
Current Model
Deutz Fahr
Deutz-Fahr D 7207
Engine Power:Diesel (listed): 70 hp / 52.2 kW
★ Baseline Reference
Related models
Deutz-Fahr Intrac 2003
- Power:
- 59
- Production years:
- 1974 - 1979
Deutz-Fahr 4060E Keyline
- Power:
- 59.1
- Production years:
- 2018 - 2026
Deutz-Fahr 3.57
- Power:
- 60
- Production years:
- 1991 - 1995
Deutz-Fahr Agroplus 60
- Power:
- 60
- Production years:
- 2001 - 2004
Deutz-Fahr D 6207
- Power:
- 60
- Production years:
- 1980 - 1984