TractorData Logo
TractorData

Deutz-Fahr DX 3.65

The Deutz-Fahr DX 3.65 is a tractor produced by Deutz Fahr. It is equipped with a 230.05 ci 3.8 L engine. The listed engine power is Diesel (listed): 70 hp / 52.2 kW. Transmission: Dual Split. Operating weight: 7960 lbs 3610 kg.

Engine Power
Diesel (listed): 70 hp / 52.2 kW
Fuel & Capacities
21.9 gal 82.9 L
Transmission
Dual Split
Operating Weight
7960 lbs 3610 kg

Overview

Deutz-Fahr DX 3.65 tractor photo
1988 - 1995 DX 3 SeriesUtility tractor DX 3 Series Utility tractor
Production
Manufacturer
Deutz-Fahr
Utility tractor
Built in Germany
Deutz-Fahr DX 3.65 Engine
Deutz 3.8L 4-cyl diesel
Fuel tank
21.9 gal 82.9 L
Engine details ...
Deutz-Fahr DX 3.65 Power
Engine
70 hp 52.2 kW
Mechanical
Four-wheel drive
Power steering
Star cab.
Hydraulics
Pump flow
10.6 gpm 40.1 lpm
Tractor hitch
Rear Type
II
Rear lift
7276 lbs 3300 kg
Power Take-off (PTO)
Rear PTO
independent
Rear PTO Type
540/1000
Dimensions & Tires
Wheelbase
88.6 inches 225 cm
Weight
7960 lbs 3610 kg
Front tire
12.4R24
Rear tire
16.9R34
Full dimensions and tires ...
References
DX 3.65 references literature
DX3 StarCab published in 1992, by Deutz-Fahr

Engine

Engine Detail — 230.05 ci / 3.8 L Diesel

Manufacturer
Deutz F4L 912
Fuel Type
Diesel
Configuration
4-cylinder, air-cooled
Displacement
230.05 ci 3.8 L
Bore/Stroke
3.94x4.72 inches 100 x 120 mm
Power
70 hp 52.2 kW
Rated RPM
2350

Transmission

Transmission options
16-speed two-speed power shift
24-speed two-speed power shift

Transmission — Dual Split

Transmission
Dual Split
Type
two-speed power shift
Gears
16 forward and 8 reverse
Four gears in two ranges with two-speed power shift.

Transmission — Dual Split

Transmission
Dual Split
Type
two-speed power shift
Gears
24 forward and 8 reverse

Dimensions

Deutz-Fahr DX 3.65 Tires
Ag front
12.4R24
Ag rear
16.9R34
Dimensions
Wheelbase
88.6 inches 225 cm
Length
149.6 inches 379 cm
Height
101.6 inches 258 cm
Weight
7960 lbs 3610 kg

Photos

Deutz-Fahr DX 3.65

Deutz-Fahr DX 3.65

Recommended Implements & Sizing Guide

Engineering recommendations for Deutz Fahr Deutz-Fahr DX 3.65 based on its 70 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
3 to 4 Bottom (16")3 - 4 铧 (40 cm)Heavy DutySuitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing
7 to 8 ft (84-96 in)2.1 - 2.4 mHeavy DutyHeavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep
78 to 84 in200 - 215 cmHeavy DutyHeavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage
7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙Medium DutyField leveling and clod breaking behind plows.
Hay BalerHay & Forage
4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机Heavy DutySilage and dry hay; 540 RPM PTO with slip-clutch.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Deutz Fahr Deutz-Fahr DX 3.65.

Estimated Continuous Field Runtime: 6 hrs

Approximately 6 hours of continuous field operation at ~75% rated power on a full tank (21.9 gal / 82.9 L).

Estimated 75% Load Fuel Burn~3.6 gal/hr (13.8 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Deutz Fahr Deutz-Fahr DX 3.65 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Deutz Fahr Deutz-Fahr DX 3.65.

Converted Equivalents:

Horsepower (HP)70 hp
Kilowatts (kW)52.2 kW
Metric Horsepower (PS / CV)71 PS

Direct Competitor Comparison

Compare Deutz-Fahr DX 3.65 against same-era industry alternatives in the same horsepower class.

Current Model
Deutz Fahr

Deutz-Fahr DX 3.65

Engine Power:Diesel (listed): 70 hp / 52.2 kW
★ Baseline Reference
DeereMarket Competitor

Deere 2200

Engine Power:63
Production Years:1993 - 1998
View Full Specs→
Massey FergusonMarket Competitor

Massey Ferguson 2220

Engine Power:63
Production Years:1999 - 2001
View Full Specs→
FordMarket Competitor

Ford 4130

Engine Power:63
Production Years:1990 - 1991
View Full Specs→
CaseIHMarket Competitor

CaseIH CS 63

Engine Power:63
Production Years:2001 - 2004
View Full Specs→

Related models