Deutz-Fahr Intrac 6.05

The Deutz-Fahr Intrac 6.05 is a tractor produced by Deutz Fahr. It is equipped with a 344.9 ci 5.7 L engine. The listed engine power is Diesel (listed): 98 hp / 73.1 kW. Transmission: 20 forward and 5 reverse. Operating weight: 10804 lbs 4900 kg.

Engine Power

Diesel (listed): 98 hp / 73.1 kW

Fuel & Capacities

35.7 gal 135.1 L

Transmission

20 forward and 5 reverse

Operating Weight

10804 lbs 4900 kg

Overview

	1987 - 1988 Intrac 6 SeriesTool Carrier tractor Intrac 6 Series Tool Carrier tractor

Production
Manufacturer	Deutz-Fahr
Tool Carrier tractor

Deutz-Fahr Intrac 6.05 Engine
Deutz 5.7L 6-cyl diesel
Fuel tank	35.7 gal 135.1 L
Engine details ...

Deutz-Fahr Intrac 6.05 Transmission
20-speed
Transmission details ...

Deutz-Fahr Intrac 6.05 Power
Engine	98 hp 73.1 kW

Mechanical
Four-wheel drive

Hydraulics
Pump flow	14.8 gpm 56.0 lpm

Tractor hitch
Rear lift	6284 lbs 2850 kg

Power Take-off (PTO)
Rear PTO Type	540/1000
Front PTO Type	1000

Dimensions & Tires
Wheelbase	106.3 inches 270 cm
Weight	10804 lbs 4900 kg
Front tire	16.9R34
Rear tire	16.9R34
Full dimensions and tires ...

Engine

Engine Detail — 344.9 ci / 5.7 L Diesel

Manufacturer	Deutz F6L912
Fuel Type	Diesel
Configuration	6-cylinder, air-cooled
Displacement	344.9 ci 5.7 L
Bore/Stroke	3.94x4.72 inches 100 x 120 mm
Power	98 hp 73.1 kW
Rated RPM	2300

Transmission

Transmission — 20 forward and 5 reverse

Gears

20 forward and 5 reverse

Dimensions

Deutz-Fahr Intrac 6.05 Tires
Ag front	16.9R34
Ag rear	16.9R34

Dimensions
Wheelbase	106.3 inches 270 cm
Length	203.94 inches 518 cm
Height	123.23 inches 313 cm
Weight	10804 lbs 4900 kg

Photos

Deutz-Fahr Intrac 6.05 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Deutz Fahr Deutz-Fahr Intrac 6.05 based on its 98 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Deutz Fahr Deutz-Fahr Intrac 6.05.

Estimated Continuous Field Runtime: 7 hrs

Approximately 7 hours of continuous field operation at ~75% rated power on a full tank (35.7 gal / 135.1 L).

Estimated 75% Load Fuel Burn~5.1 gal/hr (19.3 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours

Deutz Fahr Deutz-Fahr Intrac 6.05 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Deutz Fahr Deutz-Fahr Intrac 6.05.

Enter value:

Unit:

Converted Equivalents:

Horsepower (HP)98 hp

Kilowatts (kW)73.1 kW

Metric Horsepower (PS / CV)99.4 PS

Direct Competitor Comparison

Compare Deutz-Fahr Intrac 6.05 against same-era industry alternatives in the same horsepower class.

Current Model

Deutz Fahr