Deutz-Fahr DX 6.05
The Deutz-Fahr DX 6.05 is a tractor produced by Deutz Fahr. It is equipped with a 344.89 ci 5.7 L engine. The listed engine power is Diesel (listed): 98 hp / 73.1 kW. Transmission: TW 902. Operating weight: 9988 lbs 4530 kg.
Engine Power
Diesel (listed): 98 hp / 73.1 kW
Fuel & Capacities
31.7 gal
120.0 L
Transmission
TW 902
Operating Weight
9988 lbs
4530 kg
Overview
 | 1987 - 1991
DX6 SeriesRow-Crop tractor
DX6 Series
Row-Crop tractor |
|---|
Production | |
|---|---|
Manufacturer | Deutz-Fahr |
Row-Crop tractor | |
Deutz-Fahr DX 6.05 Engine | |
|---|---|
Deutz 5.7L 6-cyl diesel | |
Fuel tank | 31.7 gal
120.0 L |
Engine details ...  | |
Deutz-Fahr DX 6.05 Power | |
|---|---|
Engine | 98 hp
73.1 kW |
Mechanical | |
|---|---|
Four-wheel drive |
Hydraulics | |
|---|---|
Pump flow | 12.4 gpm
46.9 lpm |
Tractor hitch | |
|---|---|
Rear lift | 11466 lbs
5200 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540/1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 106.30 inches
270 cm |
Weight | 9988 lbs
4530 kg |
Front tire | 13.6R28 |
Rear tire | 18.4R38 |
Full dimensions and tires ...  | |
Engine
Engine Detail — 344.89 ci / 5.7 L Diesel
Manufacturer | Deutz F6L 912 |
Fuel Type | Diesel |
Configuration | 6-cylinder, air-cooled |
Displacement | 344.89 ci
5.7 L |
Bore/Stroke | 3.94x4.72 inches
100 x 120 mm |
Power | 98 hp
73.1 kW |
Rated RPM | 2300 |
Transmission
Transmission options | |
|---|---|
18-speed | |
24-speed |
Transmission — TW 902
Transmission | TW 902 |
Gears | 18 forward and 6 reverse |
Six gears (1-6) in three ranges (L/M/H) plus reverse range (R). | |
Transmission — 24 forward and 6 reverse
Gears | 24 forward and 6 reverse |
Six gears (1-6) in four ranges (LL/L/M/H) plus reverse range (R). | |
Dimensions
Deutz-Fahr DX 6.05 Tires | |
|---|---|
Ag front | 13.6R28 |
Ag rear | 18.4R38 |
Dimensions | |
|---|---|
Wheelbase | 106.30 inches
270 cm |
Length | 175.59 inches
445 cm |
Height | 107.87 inches
273 cm |
Weight | 9988 lbs
4530 kg |
Photos
Deutz-Fahr DX 6.05 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Deutz Fahr Deutz-Fahr DX 6.05 based on its 98 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Deutz Fahr Deutz-Fahr DX 6.05.
Estimated Continuous Field Runtime: 6.2 hrs
Approximately 6.2 hours of continuous field operation at ~75% rated power on a full tank (31.7 gal / 120 L).
Estimated 75% Load Fuel Burn~5.1 gal/hr (19.3 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Deutz Fahr Deutz-Fahr DX 6.05 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Deutz Fahr Deutz-Fahr DX 6.05.
Converted Equivalents:
Horsepower (HP)98 hp
Kilowatts (kW)73.1 kW
Metric Horsepower (PS / CV)99.4 PS
Direct Competitor Comparison
Compare Deutz-Fahr DX 6.05 against same-era industry alternatives in the same horsepower class.
Current Model
Deutz Fahr
Deutz-Fahr DX 6.05
Engine Power:Diesel (listed): 98 hp / 73.1 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 766
Engine Power:88.6
Production Years:1971 - 1976
Related models
Deutz-Fahr 4080.4E
- Power:
- 78.9
- Production years:
- 2018 - 2026
Deutz-Fahr DX 85
- Power:
- 80
- Production years:
- 1978 - 1982
Deutz-Fahr DX 4.50
- Power:
- 80.5
- Production years:
- 1983 - 1989
Deutz-Fahr 4085E
- Power:
- 80.9
- Production years:
- 2018 - 2026
Deutz-Fahr 4.51
- Power:
- 82
- Production years:
- 1989 - 1995