Fendt Farmer 308C

The Fendt Farmer 308C is a tractor produced by Fendt. It is equipped with a 194.78 ci 3.2 L engine. The listed engine power is Diesel (listed): 86 hp / 64.1 kW. Transmission: 21 forward and 6 reverse. Drive type: 4x2 2WD. Operating weight: 8,489 lbs (2WD) 3850 kg.

Engine Power

Diesel (listed): 86 hp / 64.1 kW

Drive & Traction

4x2 2WD

Fuel & Capacities

29.1 gal 110.1 L

Transmission

21 forward and 6 reverse

Operating Weight

8,489 lbs (2WD) 3850 kg

Overview

	1997 - 2003

Production
Manufacturer	Fendt

Fendt Farmer 308C Engine
MWM 3.2L 4-cyl diesel
Fuel tank	29.1 gal 110.1 L
Engine details ...

Fendt Farmer 308C Transmission
21-speed
Transmission details ...

Fendt Farmer 308C Power
Engine	86 hp 64.1 kW

Mechanical
Drive	4x2 2WD
	4x4 MFWD 4WD optional

Hydraulics
Pump flow	19.8 gpm 74.9 lpm

Tractor hitch
Rear lift	9040 lbs 4100 kg

Power Take-off (PTO)
Rear PTO Type	540, 750, 1000

Dimensions & Tires
Wheelbase	94.09 inches 238 cm
Weight	8489 to 9238 pounds
Front tire	11.00-16
Rear tire	16.9R34
Full dimensions and tires ...

Engine

Engine Detail — 194.78 ci / 3.2 L Diesel

Manufacturer	MWM
Configuration	turbocharged diesel, 4-cylinder
Displacement	194.78 ci 3.2 L
Bore/Stroke	3.700x4.527 inches 94 x 115 mm
Power	86 hp 64.1 kW
Rated RPM	2250
Torque	248.6 lb-ft 337.1 Nm
Torque RPM	1500

Transmission

Transmission — 21 forward and 6 reverse

Gears

21 forward and 6 reverse

Dimensions

Fendt Farmer 308C Tires
Ag front	11.00-16
	13.6R24 (4WD)
Ag rear	16.9R34

Dimensions
Wheelbase	94.09 inches 238 cm
Length	157.48 inches 399 cm
Height	105.51 inches 267 cm
Weight	8,489 lbs (2WD) 3850 kg
	9,238 lbs (4WD) 4190 kg

Photos

Fendt Farmer 308C tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Fendt Farmer 308C based on its 86 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Fendt Farmer 308C.

Estimated Continuous Field Runtime: 6.5 hrs

Approximately 6.5 hours of continuous field operation at ~75% rated power on a full tank (29.1 gal / 110.2 L).

Estimated 75% Load Fuel Burn~4.5 gal/hr (16.9 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours