Fendt Farmer 309C

The Fendt Farmer 309C is a tractor produced by Fendt. It is equipped with a 194.78 ci 3.2 L engine. The listed engine power is Diesel (listed): 95 hp / 70.8 kW. Transmission: 21 forward and 6 reverse. Operating weight: 9305 lbs 4220 kg.

Engine Power

Diesel (listed): 95 hp / 70.8 kW

Fuel & Capacities

29.1 gal 110.1 L

Transmission

21 forward and 6 reverse

Operating Weight

9305 lbs 4220 kg

Overview

	1997 - 2003

Production
Manufacturer	Fendt

Fendt Farmer 309C Engine
MWM 3.2L 4-cyl diesel
Fuel tank	29.1 gal 110.1 L
Engine details ...

Fendt Farmer 309C Transmission
21-speed
Transmission details ...

Fendt Farmer 309C Power
Engine	95 hp 70.8 kW

Mechanical
Four-wheel drive

Hydraulics
Pump flow	19.8 gpm 74.9 lpm

Tractor hitch
Rear lift	9040 lbs 4100 kg

Power Take-off (PTO)
Rear PTO Type	540, 750, 1000

Dimensions & Tires
Wheelbase	89.76 inches 227 cm
Weight	9305 lbs 4220 kg
Front tire	13.6R24
Rear tire	16.9R34
Full dimensions and tires ...

Engine

Engine Detail — 194.78 ci / 3.2 L Diesel

Manufacturer	MWM
Configuration	turbocharged diesel, 4-cylinder
Displacement	194.78 ci 3.2 L
Bore/Stroke	3.700x4.57 inches 94 x 116 mm
Power	95 hp 70.8 kW
Rated RPM	2350
Torque	278.8 lb-ft 378.1 Nm
Torque RPM	1500

Transmission

Transmission — 21 forward and 6 reverse

Gears

21 forward and 6 reverse

Dimensions

Fendt Farmer 309C Tires
Ag front	13.6R24
Ag rear	16.9R34

Dimensions
Wheelbase	89.76 inches 227 cm
Length	157.5 inches 400 cm
Height	105.5 inches 267 cm
Weight	9305 lbs 4220 kg

Photos

Fendt 309C, left side.

Fendt 309C, right side.

Fendt 309C, right-ear view.

Recommended Implements & Sizing Guide

Engineering recommendations for Fendt Farmer 309C based on its 95 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Fendt Farmer 309C.

Estimated Continuous Field Runtime: 5.9 hrs

Approximately 5.9 hours of continuous field operation at ~75% rated power on a full tank (29.1 gal / 110.2 L).

Estimated 75% Load Fuel Burn~4.9 gal/hr (18.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours