Fendt Favorit 610S

The Fendt Favorit 610S is a tractor produced by Fendt. It is equipped with a 317.3 ci 5.2 L engine. The listed engine power is Diesel (listed): 85 hp / 63.4 kW. Transmission: 12 forward and 6 reverse. Operating weight: 8775 to 9503 pounds.

Engine Power

Diesel (listed): 85 hp / 63.4 kW

Fuel & Capacities

34.3 gal 129.8 L

Transmission

12 forward and 6 reverse

Operating Weight

8775 to 9503 pounds

Overview

	1972 - 1976 Favorit 600 Series

Production
Manufacturer	Fendt
Built in Marktoberdorf, Germany

Fendt Favorit 610S Engine
MWM 5.2L 6-cyl diesel
Fuel tank	34.3 gal 129.8 L
Engine details ...

Fendt Favorit 610S Transmission
12-speed
Transmission details ...

Fendt Favorit 610S Power
Engine	85 hp 63.4 kW

Mechanical
Two- or four-wheel drive

Tractor hitch
Rear lift	7938 lbs 3600 kg

Power Take-off (PTO)
Rear PTO Type	540, 1000

Dimensions & Tires
Wheelbase	105.91 inches 269 cm
Weight	8775 to 9503 pounds
Front tire	7.50-20
Rear tire	18.4-34
Full dimensions and tires ...

Engine

Engine Detail — 317.3 ci / 5.2 L Diesel

Manufacturer	MWM D225-6
Fuel Type	Diesel
Configuration	6-cylinder
Displacement	317.3 ci 5.2 L
Bore/Stroke	3.74x4.72 inches 95 x 120 mm
Power	85 hp 63.4 kW
Rated RPM	2300

Transmission

Transmission — 12 forward and 6 reverse

Gears

12 forward and 6 reverse

Dimensions

Fendt Favorit 610S Tires
Ag front	7.50-20
	11.2-28 (4WD)
Ag rear	18.4-34

Dimensions
Wheelbase	105.91 inches 269 cm
Length	173.23 inches 440 cm
Height	100.00 inches 254 cm
2WD Weight	8775 lbs 3980 kg
4WD Weight	9503 lbs 4310 kg

Photos

Fendt Favorit 610S tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Fendt Favorit 610S based on its 85 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Fendt Favorit 610S.

Estimated Continuous Field Runtime: 7.8 hrs

Approximately 7.8 hours of continuous field operation at ~75% rated power on a full tank (34.3 gal / 129.8 L).

Estimated 75% Load Fuel Burn~4.4 gal/hr (16.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours