Fiat 1100E
The Fiat 1100E is a tractor produced by Fiat. It is equipped with a 452.3 ci 7.4 L engine. The listed engine power is Diesel (listed): 133 hp / 99.2 kW. Transmission: 9 forward and 2 reverse. Operating weight: 8168 to 9171 pounds.
Engine Power
Diesel (listed): 133 hp / 99.2 kW
Fuel & Capacities
50.2 gal
190.0 L
Transmission
9 forward and 2 reverse
Operating Weight
8168 to 9171 pounds
Overview
 | 1977 - 1980
Row-Crop tractor |
|---|
Production | |
|---|---|
Manufacturer | Fiat |
Row-Crop tractor | |
Built in Sauce Viejo, Argentina | |
Fiat 1100E Engine | |
|---|---|
Fiat 7.4L 6-cyl diesel | |
Fuel tank | 50.2 gal
190.0 L |
Engine details ...  | |
Fiat 1100E Transmission | |
|---|---|
9-speed gear | |
Transmission details ...  |
Fiat 1100E Power | |
|---|---|
Engine | 133 hp
99.2 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Differential lock | mechanical rear |
Power steering | |
Open operator station. | |
Tractor hitch | |
|---|---|
Rear Type | II |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 |
-unknown- | |
1000 (1.75) | |
Engine RPM | 540@1980 |
1000@1894 | |
Dimensions & Tires | |
|---|---|
2WD Wheelbase | 100.4 inches
255 cm |
4WD Wheelbase | 104.3 inches
264 cm |
Weight | 8168 to 9171 pounds |
Full dimensions and tires ...  | |
Engine
Engine Detail — 452.3 ci / 7.4 L Diesel
Manufacturer | Fiat CP3/70 |
Fuel Type | Diesel |
Configuration | 6-cylinder, liquid-cooled |
Displacement | 452.3 ci
7.4 L |
Bore/Stroke | 4.33x5.12 inches
110 x 130 mm |
Power | 133 hp
99.2 kW |
Compression | 17.4:1 |
Rated RPM | 2300 |
Starter | electric |
Starter volts | 24 |
Transmission
Transmission — 9 forward and 2 reverse gear
Type | gear |
Gears | 9 forward and 2 reverse |
Clutch | dry disc |
 | |
Dimensions
Fiat 1100E Tires |
|---|
Dimensions | |
|---|---|
2WD Wheelbase | 100.4 inches
255 cm |
4WD Wheelbase | 104.3 inches
264 cm |
2WD Length | 169.1 inches
429 cm |
4WD Length | 168.9 inches
429 cm |
2WD Clearance (front axle) | 21.3 inches
54 cm |
4WD Clearance (front axle) | 16.5 inches
41 cm |
2WD Front tread | 69.5 inches
176 cm |
4WD Front tread | 71.3 inches
181 cm |
Rear tread | 78.9 inches
200 cm |
Fiat 1100E Weight | |
|---|---|
2WD | 8168 lbs
3705 kg |
4WD | 9171 lbs
4159 kg |
Ballasted | 14528 lbs
6589 kg |
Fiat 1100E Height | |
|---|---|
Steering wheel | 72.8 inches
184 cm |
Hood | 68.5 inches
173 cm |
Exhaust | 90.9 inches
230 cm |
Recommended Implements & Sizing Guide
Engineering recommendations for Fiat 1100E based on its 133 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Fiat 1100E.
Estimated Continuous Field Runtime: 7.3 hrs
Approximately 7.3 hours of continuous field operation at ~75% rated power on a full tank (50.2 gal / 190 L).
Estimated 75% Load Fuel Burn~6.9 gal/hr (26.2 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Fiat 1100E Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Fiat 1100E.
Converted Equivalents:
Horsepower (HP)133 hp
Kilowatts (kW)99.2 kW
Metric Horsepower (PS / CV)134.8 PS
Direct Competitor Comparison
Compare Fiat 1100E against same-era industry alternatives in the same horsepower class.
Current Model
Fiat
Fiat 1100E
Engine Power:Diesel (listed): 133 hp / 99.2 kW
★ Baseline Reference
Related models
Fiat 1000 Super
- Power:
- 108.5
- Production years:
- 1976 - 1979
Fiat 110-90
- Power:
- 110
- Production years:
- 1986 - 2003
Fiat F110
- Power:
- 110
- Production years:
- 1990 - 1993
Fiat 900E
- Power:
- 113
- Production years:
- 1974 - 1980
Fiat 115-90
- Power:
- 115
- Production years:
- 1984 - 1990