Fiat F110
The Fiat F110 is a tractor produced by Fiat. It is equipped with a 357.64 ci 5.9 L engine. The listed engine power is Diesel (listed): 110 hp / 82.0 kW. Transmission: Hi-Lo. Operating weight: 10584 lbs 4800 kg.
Engine Power
Diesel (listed): 110 hp / 82.0 kW
Fuel & Capacities
58.1 gal
219.9 L
Transmission
Hi-Lo
Operating Weight
10584 lbs
4800 kg
Overview
 | 1990 - 1993
Winner SeriesRow-Crop tractor
Winner Series
Row-Crop tractor |
|---|
Production | |
|---|---|
Manufacturer | Fiat |
Row-Crop tractor | |
Fiat F110 Engine | |
|---|---|
Iveco 5.9L 6-cyl diesel | |
Fuel tank | 58.1 gal
219.9 L |
Engine details ...  | |
Fiat F110 Power | |
|---|---|
Engine | 110 hp
82.0 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Steering | hydraulic power |
Wet disc brakes | |
Cab standard. Air-conditioning optional. | |
Hydraulics | |
|---|---|
Pump flow | 14.5 gpm
54.9 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Control | position control and lower-link draft sensing |
Rear lift | 10363 lbs
4700 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Clutch | electro-hydraulic |
Rear PTO Type | 540/1000 |
540/750/1000 (optional) | |
Dimensions & Tires | |
|---|---|
Wheelbase | 105.9 inches
268 cm |
Weight | 10584 lbs
4800 kg |
Front tire | 11.00-16 |
Rear tire | 18.4-34 (2WD) |
Full dimensions and tires ...  | |
Engine
Engine Detail — 357.64 ci / 5.9 L Diesel
Manufacturer | Iveco 8065.05 |
Fuel Type | Diesel |
Configuration | 6-cylinder, liquid-cooled |
Displacement | 357.64 ci
5.9 L |
Bore/Stroke | 4.0945x4.53 inches
104 x 115 mm |
Power | 110 hp
82.0 kW |
Rated RPM | 2300 |
Starter type | electric |
Transmission
Transmission options | |
|---|---|
16-speed | |
20-speed | |
32-speed |
Transmission — 16 forward and reverse
Gears | 16 forward and reverse |
Clutch | hydraulic cerametallic dry disc |
Four gears in four ranges with synchronized shuttle. Also available as a 32-32 speed creeper. | |
Transmission — Eco-Speed
Transmission | Eco-Speed |
Gears | 20 forward and 16 reverse |
Clutch | hydraulic cerametallic dry disc |
Eco-Speed adds a 40 KPH overdrive to the 16-speed transmission. Also available as a 40-32 speed creeper. | |
Transmission — Hi-Lo
Transmission | Hi-Lo |
Gears | 32 forward and 16 reverse |
Clutch | hydraulic cerametallic dry disc |
Electro-hydraulic high-low on the base 16-speed transmission. Available in 30 KPH and 40 KPH versions. Also available as 64-32 speed creeper. | |
Dimensions
Fiat F110 Tires | |
|---|---|
Standard tires (ag) | Front: 11.00-16. Rear: 18.4-34 (2WD) |
Front: 14.9-28. Rear: 18.4-34 (4WD) | |
Dimensions | |
|---|---|
Wheelbase | 105.9 inches
268 cm |
Length | 183.1 inches
465 cm |
Height | 110.6 inches
280 cm |
Weight | 10584 lbs
4800 kg |
Photos
Fiat F110 with baler.
Fiat F110 with baler, front-left view.
Recommended Implements & Sizing Guide
Engineering recommendations for Fiat F110 based on its 110 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Fiat F110.
Estimated Continuous Field Runtime: 10.2 hrs
Approximately 10.2 hours of continuous field operation at ~75% rated power on a full tank (58.1 gal / 219.9 L).
Estimated 75% Load Fuel Burn~5.7 gal/hr (21.7 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Fiat F110 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Fiat F110.
Converted Equivalents:
Horsepower (HP)110 hp
Kilowatts (kW)82 kW
Metric Horsepower (PS / CV)111.5 PS
Direct Competitor Comparison
Compare Fiat F110 against same-era industry alternatives in the same horsepower class.
Current Model
Fiat
Fiat F110
Engine Power:Diesel (listed): 110 hp / 82.0 kW
★ Baseline Reference
Related models
Fiat 880
- Power:
- 88
- Production years:
- 1975 - 1984
Fiat 880/5
- Power:
- 88
- Production years:
- 1980 - 1984
Fiat 955C
- Power:
- 88
- Production years:
- 1981 - 1984
Fiat 800E
- Power:
- 90
- Production years:
- 1974 - 1980
Fiat 90-90
- Power:
- 90
- Production years:
- 1984 - 1991