Fiat 1380
The Fiat 1380 is a tractor produced by Fiat. It is equipped with a 335.6 ci 5.5 L engine. The listed engine power is Diesel (listed): 135 hp / 100.7 kW. Transmission: 12 forward and reverse. Drive type: 4x2 2WD. Operating weight: 12,634 lbs 5730 kg.
Engine Power
Diesel (listed): 135 hp / 100.7 kW
Drive & Traction
4x2 2WD
Fuel & Capacities
47.6 gal
180.2 L
Transmission
12 forward and reverse
Operating Weight
12,634 lbs
5730 kg
Overview
 | 1979 - 1984
80 SeriesRow-Crop tractor
80 Series
Row-Crop tractor |
|---|
Production | |
|---|---|
Manufacturer | Fiat |
Row-Crop tractor | |
Variants | |
|---|---|
1880 | 2WD |
1880DT | 4WD |
Fiat 1380 Engine | |
|---|---|
Fiat 5.5L 6-cyl diesel | |
Fuel tank | 47.6 gal
180.2 L |
Engine details ...  | |
Fiat 1380 Power | |
|---|---|
Engine | 135 hp
100.7 kW |
Mechanical | |
|---|---|
Drive | 4x2 2WD |
4x4 MFWD 4WD (1380DT) | |
Steering | hydrostatic power |
Wet disc brakes | |
Cab standard. Four-post ROPS with canopy available. | |
Hydraulics | |
|---|---|
Pump flow | 14.4 gpm
54.5 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Rear lift | 11900 lbs
5397 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 105.1 inches
266 cm |
Weight | 12634 to 13891 pounds |
Front tire | 11.00-16 |
Rear tire | 18.4-38 |
Full dimensions and tires ...  | |
Engine
Engine Detail — 335.6 ci / 5.5 L Diesel
Manufacturer | Fiat 8065-24 |
Configuration | turbocharged diesel, 6-cylinder, liquid-cooled |
Displacement | 335.6 ci
5.5 L |
Bore/Stroke | 4.05x4.33 inches
103 x 110 mm |
Power | 135 hp
100.7 kW |
Rated RPM | 2400 |
Transmission
Transmission options | |
|---|---|
12-speed | |
24-speed creeper | |
12-speed mechanical shuttle |
Transmission — 12 forward and 4 reverse
Gears | 12 forward and 4 reverse |
Clutch | 355.6 cerametallic dry disc |
Four gears (1-4) in three ranges (low, medium, and high) plus reverse range. | |
Transmission — 24 forward and 8 reverse creeper
Type | creeper |
Gears | 24 forward and 8 reverse |
Clutch | 355.6 cerametallic dry disc |
Four gears (1-4) in three ranges (low, medium, and high) plus reverse range with additional creeper range. | |
Transmission — 12 forward and reverse mechanical shuttle
Type | mechanical shuttle |
Gears | 12 forward and reverse |
Clutch | 355.6 cerametallic dry disc |
Four gears (1-4) in three ranges (low, medium, and high) with mechanical shuttle. | |
Dimensions
Fiat 1380 Tires | |
|---|---|
Ag front | 11.00-16 |
14.9-28 (4WD) | |
Ag rear | 18.4-38 |
Dimensions | |
|---|---|
Wheelbase | 105.1 inches
266 cm |
Length | 164.6 inches
418 cm |
Height | 111.8 inches
283 cm |
Weight | 12,634 lbs
5730 kg |
13,891 lbs (4WD)
6300 kg | |
Photos
Fiat 1380 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Fiat 1380 based on its 135 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Fiat 1380.
Estimated Continuous Field Runtime: 6.8 hrs
Approximately 6.8 hours of continuous field operation at ~75% rated power on a full tank (47.6 gal / 180.2 L).
Estimated 75% Load Fuel Burn~7 gal/hr (26.6 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Fiat 1380 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Fiat 1380.
Converted Equivalents:
Horsepower (HP)135 hp
Kilowatts (kW)100.7 kW
Metric Horsepower (PS / CV)136.9 PS
Direct Competitor Comparison
Compare Fiat 1380 against same-era industry alternatives in the same horsepower class.
Current Model
Fiat
Fiat 1380
Engine Power:Diesel (listed): 135 hp / 100.7 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 1246
Engine Power:122
Production Years:1972 - 1980
Related models
Fiat 1000 Super
- Power:
- 108.5
- Production years:
- 1976 - 1979
Fiat 110-90
- Power:
- 110
- Production years:
- 1986 - 2003
Fiat F110
- Power:
- 110
- Production years:
- 1990 - 1993
Fiat 900E
- Power:
- 113
- Production years:
- 1974 - 1980
Fiat 115-90
- Power:
- 115
- Production years:
- 1984 - 1990