Ford 7830
The Ford 7830 is a tractor produced by Ford. It is equipped with a 401.4 ci 6.6 L engine. The listed engine power is Diesel (listed): 112 hp / 83.5 kW. Transmission: Dual Power.
Engine Power
Diesel (listed): 112 hp / 83.5 kW
Fuel & Capacities
Diesel
Transmission
Dual Power
Overview
 | 1992 - 1997
30 Superforça SeriesUtility tractor
30 Superforça Series
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Ford (a part of New Holland) |
Utility tractor | |
Built in Curitiba, Brazil | |
Ford 7830 Engine | |
|---|---|
Ford 6.6L 6-cyl diesel | |
Engine details ...  |
Ford 7830 Transmission | |
|---|---|
16-speed | |
Transmission details ...  |
Ford 7830 Power | |
|---|---|
Engine | 112 hp
83.5 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Power steering | |
Wet disc brakes | |
Two-post ROPS. |
Hydraulics | |
|---|---|
Type | open center |
Pump flow | 9.2 gpm
34.8 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540 |
Dimensions & Tires | |
|---|---|
Full dimensions and tires ...  |
Electrical | |
|---|---|
Charging system | alternator |
Engine
Engine Detail — 401.4 ci / 6.6 L Diesel
Manufacturer | Ford |
Fuel Type | Diesel |
Configuration | 6-cylinder, liquid-cooled |
Displacement | 401.4 ci
6.6 L |
Bore/Stroke | 4.4x5.00 inches
112 x 127 mm |
Power | 112 hp
83.5 kW |
Transmission
Transmission — Dual Power
Transmission | Dual Power |
Gears | 16 forward and 4 reverse |
Dimensions
Ford 7830 Tires |
|---|
Dimensions |
|---|
Recommended Implements & Sizing Guide
Engineering recommendations for Ford 7830 based on its 112 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Ford 7830.
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Ford 7830 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Ford 7830.
Converted Equivalents:
Horsepower (HP)112 hp
Kilowatts (kW)83.5 kW
Metric Horsepower (PS / CV)113.6 PS
Direct Competitor Comparison
Compare Ford 7830 against same-era industry alternatives in the same horsepower class.
Current Model
Ford
Ford 7830
Engine Power:Diesel (listed): 112 hp / 83.5 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 756
Engine Power:101
Production Years:1967 - 1971