Holder Cultitrac A30

The Holder Cultitrac A30 is a tractor produced by Holder. The listed engine power is Diesel (listed): 32 hp / 23.9 kW. Transmission: 6 forward and 3 reverse. Operating weight: 2,194 lbs 995 kg.

Engine Power

Diesel (listed): 32 hp / 23.9 kW

Fuel & Capacities

Diesel

Transmission

6 forward and 3 reverse

Operating Weight

2,194 lbs 995 kg

Overview

Production
Manufacturer	Holder

Holder A30 Engine
Holder 2-cyl diesel
Engine details ...

Holder A30 Transmission
6-speed
Transmission details ...

Holder A30 Power
Engine	32 hp 23.9 kW

Mechanical
Four-wheel drive

Tractor hitch
Rear Type	1
Rear lift (at ends)	3,086 lbs 1399 kg

Power Take-off (PTO)
Rear PTO Type	540

Dimensions & Tires
Wheelbase	47.1 inches 119 cm
Weight	2,194 lbs 995 kg
Front tire	7.00x16
Rear tire	7.00x16
Full dimensions and tires ...

Engine

Engine Detail — Diesel

Manufacturer	Holder
Fuel Type	Diesel
Configuration	2-cylinder
Power	32 hp 23.9 kW

Transmission

Transmission — 6 forward and 3 reverse

Gears

6 forward and 3 reverse

Dimensions

Holder A30 Tires
Ag front	7.00x16
Ag rear	7.00x16

Dimensions
Wheelbase	47.1 inches 119 cm
Length	108 inches 274 cm
Width	31 inches 78 cm
Height	42.7 inches 108 cm
Weight	2,194 lbs 995 kg

Photos

Holder Cultitrac A30 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Holder Cultitrac A30 based on its 32 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm)	Medium Duty	Standard utility farm tillage.
Rotary Cutter / MowerMowing & Clearing	5 ft (60 in)1.5 m	Medium Duty	Pasture maintenance and weeds up to 1.5" diameter.
Rotary TillerSeedbed Prep	54 to 60 in135 - 150 cm	Medium Duty	Thorough seedbed preparation in orchards and vegetable plots.
Disc HarrowSecondary Tillage	5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)	Light Duty	Small acreage soil break-up and secondary aeration.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Holder Cultitrac A30.

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours