Holder Cultitrac AG35

The Holder Cultitrac AG35 is a tractor produced by Holder. It is equipped with a 91.5 ci 1.5 L engine. The listed engine power is Diesel (listed): 34 hp / 25.4 kW. Transmission: 8 forward and 4 reverse. Operating weight: 2,720 lbs 1233 kg.

Engine Power

Diesel (listed): 34 hp / 25.4 kW

Fuel & Capacities

Diesel

Transmission

8 forward and 4 reverse

Operating Weight

2,720 lbs 1233 kg

Overview

Production
Manufacturer	Holder

Holder AG35 Engine
1.5L 3-cyl diesel
Engine details ...

Holder AG35 Transmission
8-speed
Transmission details ...

Holder AG35 Power
Engine	34 hp 25.4 kW

Mechanical
Four-wheel drive
Drum brakes

Tractor hitch
Rear Type	1

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	590

Dimensions & Tires
Wheelbase	57 inches 144 cm
Weight	2,720 lbs 1233 kg
Front tire	8.00x24
Rear tire	8.00x24
Full dimensions and tires ...

Engine

Engine Detail — 91.5 ci / 1.5 L Diesel

Fuel Type	Diesel
Configuration	3-cylinder
Displacement	91.5 ci 1.5 L
Power	34 hp 25.4 kW
Rated RPM	liquid

Transmission

Transmission — 8 forward and 4 reverse

Gears

8 forward and 4 reverse

Dimensions

Holder AG35 Tires
Ag front	8.00x24
Ag rear	8.00x24

Dimensions
Wheelbase	57 inches 144 cm
Length	108 inches 274 cm
Width	47 inches 119 cm
Height	43 inches 109 cm
Weight	2,720 lbs 1233 kg
Ground clearance	13.7 inches 34 cm

Recommended Implements & Sizing Guide

Engineering recommendations for Holder Cultitrac AG35 based on its 34 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm)	Medium Duty	Standard utility farm tillage.
Rotary Cutter / MowerMowing & Clearing	5 ft (60 in)1.5 m	Medium Duty	Pasture maintenance and weeds up to 1.5" diameter.
Rotary TillerSeedbed Prep	54 to 60 in135 - 150 cm	Medium Duty	Thorough seedbed preparation in orchards and vegetable plots.
Disc HarrowSecondary Tillage	5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)	Light Duty	Small acreage soil break-up and secondary aeration.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Holder Cultitrac AG35.

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours