International Harvester T-5
The International Harvester T-5 is a tractor produced by International Harvester. It is equipped with a 134.8 ci 2.2 L engine. The listed engine power is 36.01 hp 26.9 kW. Transmission: Torque-Amplifier. Drive type: crawler. Operating weight: 5959 lbs 2703 kg.
Overview
![]() | 1959 - 1964
Agricultural Crawler tractor |
|---|
Production | |
|---|---|
Manufacturer | International Harvester |
Agricultural Crawler tractor | |
Factories | Melrose Park, Illinois, USA |
Hamilton, Ontario, Canada | |
Variants | |
|---|---|
T-5 | gasoline |
TD-5 | diesel |
International Harvester T-5 Engine | |
|---|---|
International Harvester 2.2L 4-cyl gasoline | |
Fuel tank | 15.9 gal
60.2 L |
Engine details ... | |
International Harvester T-5 Power | |
|---|---|
Drawbar (claimed) | 30 hp
22.4 kW |
Belt (claimed) | 36 hp
26.8 kW |
Drawbar (tested) | 28.6 hp
21.3 kW |
PTO (tested) | 36.01 hp
26.9 kW |
Performance test details ... | |
Mechanical | |
|---|---|
Drive | crawler |
Open operator station. | |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 980 |
Dimensions & Tracks | |
|---|---|
Weight | 5959 lbs
2703 kg |
Tracks | |
Full dimensions and tracks ... | |
References | |
|---|---|
![]() | |
Trucks, Tractors and Farm Equipment in Australia published in 1964, by International Harvester |
Engine
Engine Detail — 134.8 ci / 2.2 L Gasoline
Manufacturer | International Harvester C-135 |
Fuel Type | Gasoline |
Configuration | 4-cylinder, liquid-cooled vertical L-head |
Displacement | 134.8 ci
2.2 L |
Bore/Stroke | 3.25x4.0625 inches
83 x 103 mm |
Compression | 7.4:1 |
Rated RPM | 2000 |
Firing order | 1-3-4-2 |
Oil capacity | 5 qts
4.7 L |
Coolant capacity | 12 qts
11.4 L |
Sparkplug gap | 0.023 inches
0.584 mm |
Point gap | 0.020 inches
0.508 mm |
Intake valve clearance | 0.014 inches
0.356 mm |
Exhaust valve clearance | 0.020 inches
0.508 mm |
Transmission
Transmission options | |
|---|---|
5-speed | |
10-speed |
Transmission — Sliding spur gears
Transmission | Sliding spur gears |
Gears | 5 forward and 1 reverse |
Oil capacity | 13.2 qts
12.5 L |
![]() | |
Transmission — Torque-Amplifier
Transmission | Torque-Amplifier |
Gears | 10 forward and 2 reverse |
Oil capacity | 15.6 qts
14.8 L |
30.6 qts (with hydraulics)
29.0 L | |
![]() | |
Transmission — 5 forward and reverse
Gears | 5 forward and reverse |
Oil capacity | 15.6 qts
14.8 L |
30.6 qts (with hydraulics)
29.0 L |
Dimensions
International Harvester T-5 Tracks |
|---|
Dimensions | |
|---|---|
Length | 102 inches
259 cm |
104.75 inches (low-profile)
266 cm | |
Width | 48 inches (38-inch track)
121 cm |
78 inches (68-inch track)
198 cm | |
Height | 74 inches
187 cm |
45.75 inches (low-profile)
116 cm | |
Weight | 5959 lbs
2703 kg |
Ground clearance | 14.5 inches
36 cm |
12 inches (low-profile)
30 cm | |
Gauge | 38 inches
96 cm |
Gauge | 48 inches
121 cm |
Gauge | 68 inches
172 cm |
Tests
Nebraska Tractor Test 753 | |
|---|---|
Gasoline Torque Amplifier crawler
August 18 - September 3, 1960
Link: Nebraska Tractor Test 753 file | |
PTO performance | |
Power at rated engine speed | 36.01 hp
26.9 kW |
Fuel use | 2.9 gal/hour
11.0 l/hour |
Drawbar performance | |
Max power | 28.6 hp
21.3 kW |
Fuel use | 2.9 gal/hour
11.0 l/hour |
Gear 2 used for power test. | |
Max pull | 7430 lbs
3370 kg |
Gear 1 used for pull test. | |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for International Harvester T-5 based on its 36.01 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm) | Medium Duty | Standard utility farm tillage. |
Rotary Cutter / MowerMowing & Clearing | 5 ft (60 in)1.5 m | Medium Duty | Pasture maintenance and weeds up to 1.5" diameter. |
Rotary TillerSeedbed Prep | 54 to 60 in135 - 150 cm | Medium Duty | Thorough seedbed preparation in orchards and vegetable plots. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Hay BalerHay & Forage | Small Square Baler (14x18")小方捆打捆机 (36x46 cm) | Medium Duty | Classic 2-string baler for horse and small livestock hay. |
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for International Harvester T-5.
Estimated Continuous Field Runtime: 8.5 hrs
Approximately 8.5 hours of continuous field operation at ~75% rated power on a full tank (15.9 gal / 60.2 L).
Engine Crankcase Oil
Transmission & Hydraulic System
Engine Cooling System
International Harvester T-5 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for International Harvester T-5.
Converted Equivalents:
Direct Competitor Comparison
Compare International Harvester T-5 against same-era industry alternatives in the same horsepower class.
International Harvester T-5
Related models
International Harvester 274
- Power:
- 30
- Production years:
- 1979 - 1983
International Harvester B-250
- Power:
- 30
- Production years:
- 1956 - 1961
International Harvester D-430
- Power:
- 30
- Production years:
- 1956 - 1962
International Harvester DGD-4
- Power:
- 30
- Production years:
- 1953 - 1956
International Harvester F-240
- Power:
- 30
- Production years:
- 1962 - 1965






