Iseki TA210
The Iseki TA210 is a tractor produced by Iseki. It is equipped with a 87.2 ci 1.4 L engine. The listed engine power is Diesel (listed): 21 hp / 15.7 kW. Transmission: 16 forward and reverse. Operating weight: 2127 to 2403 pounds.
Engine Power
Diesel (listed): 21 hp / 15.7 kW
Fuel & Capacities
5.6 gal
21.2 L
Transmission
16 forward and reverse
Operating Weight
2127 to 2403 pounds
Overview
![]() | 1985 - 1987
Landleader TA0 SeriesCompact Utility tractor
Landleader TA0 Series
Compact Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Iseki |
Compact Utility tractor | |
Variants | |
|---|---|
TA210F | 4WD |
Iseki TA210 Engine | |
|---|---|
Isuzu 1.4L 3-cyl diesel | |
Fuel tank | 5.6 gal
21.2 L |
Engine details ... | |
Iseki TA210 Transmission | |
|---|---|
16-speed | |
Transmission details ... |
Iseki TA210 Power | |
|---|---|
Engine | 21 hp
15.7 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Open operator station. |
Tractor hitch | |
|---|---|
Rear Type | JIS1 |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 (1.375) |
Engine RPM | 565@2500 |
733@2500 | |
898@2500 | |
1244@2500 | |
Dimensions & Tires | |
|---|---|
Wheelbase | 60.6 inches
153 cm |
Weight | 2127 to 2403 pounds |
Front tire | 4.00-15 |
2WD Rear tire | 9.5-22 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
References | |
|---|---|
![]() | |
Landleader published in 1987, by Iseki |
Engine
Engine Detail — 87.2 ci / 1.4 L Diesel
Manufacturer | Isuzu E3AG1 |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 87.2 ci
1.4 L |
Bore/Stroke | 3.307x3.385 inches
84 x 86 mm |
Power | 21 hp
15.7 kW |
Rated RPM | 2500 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — 16 forward and reverse
Gears | 16 forward and reverse |
![]() | |
Dimensions
Iseki TA210 Tires | |
|---|---|
2WD Standard tires (ag) | Front: 4.00-15. Rear: 9.5-22 |
4WD Standard tires (ag) | Front: 6-14. Rear: 9.5-22 |
Dimensions | |
|---|---|
Wheelbase | 60.6 inches
153 cm |
Length | 114.4 inches
290 cm |
Width | 49.2 inches
124 cm |
Height (exhaust) | 74.4 inches
188 cm |
2WD Weight | 2127 lbs
964 kg |
4WD Weight | 2403 lbs
1090 kg |
Ground clearance | 10 inches
25 cm |
2WD Front tread | 37.8/40.2 inches
96/102 cm |
4WD Front tread | 40.2 inches
102 cm |
Rear tread | 37/42.9 inches
93/108 cm |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for Iseki TA210 based on its 21 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 4 ft (48 in)1.2 m | Light Duty | Pasture clipping and light brush under 1" diameter. |
Rotary TillerSeedbed Prep | 42 to 48 in105 - 120 cm | Light Duty | Covers compact tractor tire width. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Iseki TA210.
Estimated Continuous Field Runtime: 5.1 hrs
Approximately 5.1 hours of continuous field operation at ~75% rated power on a full tank (5.6 gal / 21.2 L).
Estimated 75% Load Fuel Burn~1.1 gal/hr (4.1 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Iseki TA210 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Iseki TA210.
Converted Equivalents:
Horsepower (HP)21 hp
Kilowatts (kW)15.7 kW
Metric Horsepower (PS / CV)21.3 PS
Direct Competitor Comparison
Compare Iseki TA210 against same-era industry alternatives in the same horsepower class.
Current Model
Iseki
Iseki TA210
Engine Power:Diesel (listed): 21 hp / 15.7 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester D-219
Engine Power:19
Production Years:1962 - 1966
Related models
Iseki TF317
- Power:
- 16.8
- Production years:
- 1996 - 2006
Iseki TU170
- Power:
- 16.8
- Production years:
- 1984 - 1986
Iseki TU1700
- Power:
- 16.8
- Production years:
- 1981 - 1984
Iseki TU1701
- Power:
- 16.8
- Production years:
- 1984 - 1994
Iseki TM170
- Power:
- 17
- Production years:
- 2002 - 2005






