Iseki TA227
The Iseki TA227 is a tractor produced by Iseki. It is equipped with a 87.2 ci 1.4 L engine. The listed engine power is Diesel (listed): 21.7 hp / 16.2 kW. Transmission: 16 forward and reverse. Operating weight: 2194 to 2866 pounds.
Engine Power
Diesel (listed): 21.7 hp / 16.2 kW
Fuel & Capacities
5.6 gal
21.2 L
Transmission
16 forward and reverse
Operating Weight
2194 to 2866 pounds
Overview
![]() | 1989 - 1992
Landleader TA7 SeriesCompact Utility tractor
Landleader TA7 Series
Compact Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Iseki |
Compact Utility tractor | |
Variants | |
|---|---|
TA227F | 4WD |
Iseki TA227 Engine | |
|---|---|
Iseki 1.4L 3-cyl diesel | |
Fuel tank | 5.6 gal
21.2 L |
Engine details ... | |
Iseki TA227 Transmission | |
|---|---|
16-speed | |
Transmission details ... |
Iseki TA227 Power | |
|---|---|
Engine | 21.7 hp
16.2 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Open operator station. Cab optional. |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 (1.375) |
Engine RPM | 565@2500 |
733@2500 | |
1060@2500 | |
1244@2500 | |
Dimensions & Tires | |
|---|---|
Wheelbase | 61.6 inches
156 cm |
Weight | 2194 to 2866 pounds |
Front tire | 4.00-15 |
2WD Rear tire | 9.5-22 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
References | |
|---|---|
![]() | |
Land Leader 7 Series published in 1993, by Iseki |
Engine
Engine Detail — 87.2 ci / 1.4 L Diesel
Manufacturer | Iseki E3AG1 |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 87.2 ci
1.4 L |
Bore/Stroke | 3.307x3.385 inches
84 x 86 mm |
Power | 21.7 hp
16.2 kW |
Rated RPM | 2500 |
Starter | electric |
Starter volts | 12 |
Oil capacity | 5.1 qts
4.8 L |
Iseki TA227 Engine | |
|---|---|
![]() |
Transmission
Transmission — 16 forward and reverse
Gears | 16 forward and reverse |
Four gears (1-4) in four ranges with shuttle shift. | |
![]() | |
Dimensions
Iseki TA227 Tires | |
|---|---|
2WD Standard tires (ag) | Front: 4.00-15. Rear: 9.5-22 |
4WD Standard tires (ag) | Front: 6-14. Rear: 9.5-22 |
Dimensions | |
|---|---|
Wheelbase | 61.6 inches
156 cm |
Length | 114.4 inches
290 cm |
Width | 49.2 inches
124 cm |
Height (steering wheel) | 54.9 inches
139 cm |
Height (cab) | 74.6 inches
189 cm |
Ground clearance | 10.4 inches
26 cm |
2WD Front tread | 35.8/39.8 inches
90/101 cm |
4WD Front tread | 42.2 inches
107 cm |
Rear tread | 37/42.9 inches
93/108 cm |
Iseki TA227 Weight | |
|---|---|
2WD Open | 2194 lbs
995 kg |
4WD Open | 2381 lbs
1080 kg |
2WD Cab | 2679 lbs
1215 kg |
4WD Cab | 2866 lbs
1300 kg |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for Iseki TA227 based on its 21.7 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 4 ft (48 in)1.2 m | Light Duty | Pasture clipping and light brush under 1" diameter. |
Rotary TillerSeedbed Prep | 42 to 48 in105 - 120 cm | Light Duty | Covers compact tractor tire width. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Iseki TA227.
Estimated Continuous Field Runtime: 5 hrs
Approximately 5 hours of continuous field operation at ~75% rated power on a full tank (5.6 gal / 21.2 L).
Estimated 75% Load Fuel Burn~1.1 gal/hr (4.3 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Iseki TA227 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Iseki TA227.
Converted Equivalents:
Horsepower (HP)21.7 hp
Kilowatts (kW)16.2 kW
Metric Horsepower (PS / CV)22 PS
Direct Competitor Comparison
Compare Iseki TA227 against same-era industry alternatives in the same horsepower class.
Current Model
Iseki
Iseki TA227
Engine Power:Diesel (listed): 21.7 hp / 16.2 kW
★ Baseline Reference
Related models
Iseki TH18
- Power:
- 17.8
- Production years:
- 2004 - 2010
Iseki TU180
- Power:
- 17.8
- Production years:
- 1984 - 1986
Iseki TM18
- Power:
- 18
- Production years:
- 2006 - 2012
Iseki TS1910
- Power:
- 18
- Production years:
- 1976 - 1980
Iseki TU318
- Power:
- 18









