Iseki TU180
The Iseki TU180 is a tractor produced by Iseki. It is equipped with a 71.4 ci 1.2 L engine. The listed engine power is Diesel (listed): 17.8 hp / 13.3 kW. Transmission: 12 forward and 4 reverse. Operating weight: 1918 to 2116 pounds.
Engine Power
Diesel (listed): 17.8 hp / 13.3 kW
Fuel & Capacities
6.6 gal
25.0 L
Transmission
12 forward and 4 reverse
Operating Weight
1918 to 2116 pounds
Overview
![]() | 1984 - 1986
Landhope TU SeriesCompact Utility tractor
Landhope TU Series
Compact Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Iseki |
Compact Utility tractor | |
Variants | |
|---|---|
TU180F | 4WD |
Iseki TU180 Engine | |
|---|---|
Iseki 1.2L 3-cyl diesel | |
Fuel tank | 6.6 gal
25.0 L |
Engine details ... | |
Iseki TU180 Transmission | |
|---|---|
12-speed | |
Transmission details ... |
Iseki TU180 Power | |
|---|---|
Engine | 17.8 hp
13.3 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Open operator station. |
Tractor hitch | |
|---|---|
Rear Type | 0 |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 (1.375) |
Engine RPM | 553@2500 |
848@2500 | |
1309@2500 | |
Dimensions & Tires | |
|---|---|
Wheelbase | 57.5 inches
146 cm |
Weight | 1918 to 2116 pounds |
Front tire | 400-12 |
2WD Rear tire | 8.3-24 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
Engine
Engine Detail — 71.4 ci / 1.2 L Diesel
Manufacturer | Iseki E3AF1 |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 71.4 ci
1.2 L |
Bore/Stroke | 2.992x3.386 inches
76 x 86 mm |
Power | 17.8 hp
13.3 kW |
Rated RPM | 2500 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — 12 forward and 4 reverse
Gears | 12 forward and 4 reverse |
Three gears, plus reverse, in four ranges. | |
![]() | |
Dimensions
Iseki TU180 Tires | |
|---|---|
2WD Standard tires (ag) | Front: 400-12. Rear: 8.3-24 |
4WD Standard tires (ag) | Front: 6-14. Rear: 8.3-24 |
Dimensions | |
|---|---|
Wheelbase | 57.5 inches
146 cm |
Length | 121.1 inches
307 cm |
Width | 46.5 inches
118 cm |
2WD Height | 74 inches
187 cm |
4WD Height | 74.2 inches
188 cm |
2WD Weight | 1918 lbs
870 kg |
4WD Weight | 2116 lbs
959 kg |
2WD Ground clearance | 10.6 inches
26 cm |
4WD Ground clearance | 10.8 inches
27 cm |
2WD Front tread | 37 to 38.6 inches
93 to 98 cm |
4WD Front tread | 40.2 inches
102 cm |
Rear tread | 37 to 43.1 inches
93 to 109 cm |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for Iseki TU180 based on its 17.8 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 4 ft (48 in)1.2 m | Light Duty | Pasture clipping and light brush under 1" diameter. |
Rotary TillerSeedbed Prep | 42 to 48 in105 - 120 cm | Light Duty | Covers compact tractor tire width. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Iseki TU180.
Estimated Continuous Field Runtime: 7.1 hrs
Approximately 7.1 hours of continuous field operation at ~75% rated power on a full tank (6.6 gal / 25 L).
Estimated 75% Load Fuel Burn~0.9 gal/hr (3.5 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Iseki TU180 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Iseki TU180.
Converted Equivalents:
Horsepower (HP)17.8 hp
Kilowatts (kW)13.3 kW
Metric Horsepower (PS / CV)18 PS
Direct Competitor Comparison
Compare Iseki TU180 against same-era industry alternatives in the same horsepower class.
Current Model
Iseki
Iseki TU180
Engine Power:Diesel (listed): 17.8 hp / 13.3 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester Type A 15HP
Engine Power:16.7
Production Years:1908 - 1911
Related models
Iseki TU145
- Power:
- 14.3
- Production years:
- 1986 - 1990
Iseki TU147
- Power:
- 14.3
- Production years:
- 1989 - 1992
Iseki TM15
- Power:
- 14.6
- Production years:
- 1995 - 2002
Iseki TX1510
- Power:
- 14.6
- Production years:
- 1978 - 1981
Iseki TX155
- Power:
- 14.6









