Iseki TH18
The Iseki TH18 is a tractor produced by Iseki. It is equipped with a 61.4 ci 1.0 L engine. The listed engine power is Diesel (listed): 17.8 hp / 13.3 kW. Transmission: 12 forward and reverse. Operating weight: 1709 lbs 775 kg.
Engine Power
Diesel (listed): 17.8 hp / 13.3 kW
Fuel & Capacities
6.6 gal
25.0 L
Transmission
12 forward and reverse
Operating Weight
1709 lbs
775 kg
Overview
![]() | 2004 - 2010
TH SeriesCompact Utility tractor
TH Series
Compact Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Iseki |
Compact Utility tractor | |
Iseki TH18 Engine | |
|---|---|
Iseki 1.0L 3-cyl diesel | |
Fuel tank | 6.6 gal
25.0 L |
Engine details ... | |
Iseki TH18 Transmission | |
|---|---|
12-speed gear | |
Transmission details ... |
Iseki TH18 Power | |
|---|---|
Engine | 17.8 hp
13.3 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Power steering | |
Wet disc brakes | |
Two-post folding ROPS. |
Tractor hitch | |
|---|---|
Rear Type | JIS0 |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 (1.375) |
Engine RPM | 523@2500 |
783@2500 | |
1184@2500 | |
Dimensions & Tires | |
|---|---|
Wheelbase | 53.4 inches
135 cm |
Weight | 1709 lbs
775 kg |
Front tire | 6.00-12 |
Rear tire | 8.3-22 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
References | |
|---|---|
![]() | |
Operator's Manual TH Series (1716-912-003-5G) published in 2004 | |
TH Series - Sial Hunter published in 2006, by Iseki |
Engine
Engine Detail — 61.4 ci / 1.0 L Diesel
Manufacturer | Iseki E3100 |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 61.4 ci
1.0 L |
Bore/Stroke | 2.91x3.07 inches
74 x 78 mm |
Power | 17.8 hp
13.3 kW |
Rated RPM | 2500 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — 12 forward and reverse gear
Type | gear |
Gears | 12 forward and reverse |
Clutch | dry disc |
Four gears in three ranges with mechanical shuttle. | |
![]() | |
Dimensions
Iseki TH18 Tires | |
|---|---|
Standard tires (ag) | Front: 6.00-12. Rear: 8.3-22 |
Dimensions | |
|---|---|
Wheelbase | 53.4 inches
135 cm |
Length | 102 inches
259 cm |
Width | 43.7 inches
110 cm |
Height (ROPS) | 73.4 inches
186 cm |
Weight | 1709 lbs
775 kg |
Ground clearance | 13.2 inches
33 cm |
Front tread | 34.7 inches
88 cm |
Rear tread | 33.5/39.6 inches
85/100 cm |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for Iseki TH18 based on its 17.8 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 4 ft (48 in)1.2 m | Light Duty | Pasture clipping and light brush under 1" diameter. |
Rotary TillerSeedbed Prep | 42 to 48 in105 - 120 cm | Light Duty | Covers compact tractor tire width. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Iseki TH18.
Estimated Continuous Field Runtime: 7.1 hrs
Approximately 7.1 hours of continuous field operation at ~75% rated power on a full tank (6.6 gal / 25 L).
Estimated 75% Load Fuel Burn~0.9 gal/hr (3.5 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Iseki TH18 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Iseki TH18.
Converted Equivalents:
Horsepower (HP)17.8 hp
Kilowatts (kW)13.3 kW
Metric Horsepower (PS / CV)18 PS
Direct Competitor Comparison
Compare Iseki TH18 against same-era industry alternatives in the same horsepower class.
Current Model
Iseki
Iseki TH18
Engine Power:Diesel (listed): 17.8 hp / 13.3 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester Type A 15HP
Engine Power:16.7
Production Years:1908 - 1911
Related models
Iseki TU145
- Power:
- 14.3
- Production years:
- 1986 - 1990
Iseki TU147
- Power:
- 14.3
- Production years:
- 1989 - 1992
Iseki TM15
- Power:
- 14.6
- Production years:
- 1995 - 2002
Iseki TX1510
- Power:
- 14.6
- Production years:
- 1978 - 1981
Iseki TX155
- Power:
- 14.6



