Iseki TM18
The Iseki TM18 is a tractor produced by Iseki. It is equipped with a 68.5 ci 1.1 L engine. The listed engine power is Diesel (listed): 18 hp / 13.4 kW. Transmission: infinite forward and reverse (3-range). Operating weight: 1466 lbs (gear) 664 kg.
Engine Power
Diesel (listed): 18 hp / 13.4 kW
Fuel & Capacities
6.6 gal
25.0 L
Transmission
infinite forward and reverse (3-range)
Operating Weight
1466 lbs (gear)
664 kg
Overview
 | 2006 - 2012
TM SeriesCompact Utility tractor
TM Series
Compact Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Iseki |
Compact Utility tractor | |
Iseki TM18 Engine | |
|---|---|
Iseki 1.1L 3-cyl diesel | |
Fuel tank | 6.6 gal
25.0 L |
Engine details ...  | |
Iseki TM18 Power | |
|---|---|
Engine | 18 hp
13.4 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Steering | power |
Mechanical wet disc brakes | |
Two-post ROPS. | |
Tractor hitch | |
|---|---|
Rear Type | I |
Control | position control |
Power Take-off (PTO) | |
|---|---|
Clutch | dry disc |
Rear PTO Type | 540/750/1000 (1.375) |
Dimensions & Tires | |
|---|---|
Wheelbase | 53 inches
134 cm |
Weight | 1466 to 1576 pounds |
Front tire | 5.00-12 |
Rear tire | 8-18 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
References | |
|---|---|
 | |
TM16 - TM18 published in 2013, by Iseki | |
Operator's Manual TM18-16 published by Iseki |
Engine
Engine Detail — 68.5 ci / 1.1 L Diesel
Manufacturer | Iseki E3112 |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 68.5 ci
1.1 L |
Bore/Stroke | 3.08x3.07 inches
78 x 78 mm |
Power | 18 hp
13.4 kW |
Rated RPM | 2500 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission options | |
|---|---|
6-speed gear | |
9-speed creeper | |
hydrostatic |
Transmission — 6 forward and reverse gear
Type | gear |
Gears | 6 forward and reverse |
Clutch | dry disc |
 | |
Transmission | |
Type | creeper |
Gears | 9 forward and reverse |
 | |
Transmission — infinite forward and reverse (3-range) hydrostatic
Type | hydrostatic |
Gears | infinite forward and reverse (3-range) |
 | |
Dimensions
Iseki TM18 Tires | |
|---|---|
Ag front | 5.00-12 |
Ag rear | 8-18 |
Dimensions | |
|---|---|
Wheelbase | 53 inches
134 cm |
Length | 87 inches
220 cm |
Width | 40.6 inches
103 cm |
Height | 72.1 inches
183 cm |
Weight | 1466 lbs (gear)
664 kg |
1576 lbs (hydro)
714 kg | |
Ground clearance | 11.8 inches
29 cm |
Front tread | 30.9 inches
78 cm |
Rear tread | 32.3 to 36.6 inches
82 to 92 cm |
Photos
Iseki TM18 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Iseki TM18 based on its 18 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 4 ft (48 in)1.2 m | Light Duty | Pasture clipping and light brush under 1" diameter. |
Rotary TillerSeedbed Prep | 42 to 48 in105 - 120 cm | Light Duty | Covers compact tractor tire width. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Iseki TM18.
Estimated Continuous Field Runtime: 7.1 hrs
Approximately 7.1 hours of continuous field operation at ~75% rated power on a full tank (6.6 gal / 25 L).
Estimated 75% Load Fuel Burn~0.9 gal/hr (3.5 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Iseki TM18 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Iseki TM18.
Converted Equivalents:
Horsepower (HP)18 hp
Kilowatts (kW)13.4 kW
Metric Horsepower (PS / CV)18.2 PS
Direct Competitor Comparison
Compare Iseki TM18 against same-era industry alternatives in the same horsepower class.
Current Model
Iseki
Iseki TM18
Engine Power:Diesel (listed): 18 hp / 13.4 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester Type A 15HP
Engine Power:16.7
Production Years:1908 - 1911
Related models
Iseki TM15
- Power:
- 14.6
- Production years:
- 1995 - 2002
Iseki TX1510
- Power:
- 14.6
- Production years:
- 1978 - 1981
Iseki TX155
- Power:
- 14.6
Iseki TU1500
- Power:
- 14.7
- Production years:
- 1981 - 1984
Iseki TU1501
- Power:
- 14.7
- Production years:
- 1984 - 1994