Iseki TS1910
The Iseki TS1910 is a tractor produced by Iseki. It is equipped with a 59.5 ci 1.0 L engine. The listed engine power is Diesel (listed): 18 hp / 13.4 kW. Transmission: 18 forward and 6 reverse. Operating weight: 1587 to 1907 pounds.
Engine Power
Diesel (listed): 18 hp / 13.4 kW
Fuel & Capacities
4.2 gal
15.9 L
Transmission
18 forward and 6 reverse
Operating Weight
1587 to 1907 pounds
Overview
![]() | 1976 - 1980
TS SeriesCompact Utility tractor
TS Series
Compact Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Iseki |
Compact Utility tractor | |
Variants | |
|---|---|
TS1910F | 4WD |
Iseki TS1910 Engine | |
|---|---|
Isuzu 1.0L 2-cyl diesel | |
Fuel tank | 4.2 gal
15.9 L |
Engine details ... | |
Iseki TS1910 Power | |
|---|---|
Engine | 18 hp
13.4 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Open operator station. |
Tractor hitch | |
|---|---|
Rear Type | JIS0 |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 (1.375) |
Engine RPM | 548@2600 |
713@2600 | |
878@2600 | |
1281@2600 | |
Dimensions & Tires | |
|---|---|
Wheelbase | 54.3 inches
137 cm |
Weight | 1587 to 1907 pounds |
Front tire | 4.00-12 |
2WD Rear tire | 8.3/8-24 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
References | |
|---|---|
![]() | |
TS & TX Series published in 1975, by Iseki | |
TS1610-TS2810 | |
TS1610-TS1910-TD2202-TD2205 | |
TS1910G published in 1980, by Iseki |
Engine
Engine Detail — 59.5 ci / 1.0 L Diesel
Manufacturer | Isuzu 2AA1 |
Fuel Type | Diesel |
Configuration | 2-cylinder, liquid-cooled |
Displacement | 59.5 ci
1.0 L |
Bore/Stroke | 3.39x3.31 inches
86 x 84 mm |
Power | 18 hp
13.4 kW |
Rated RPM | 2600 |
Starter | electric |
Starter volts | 12 |
Oil capacity | 3.8 qts
3.6 L |
Iseki TS1910 Engine | |
|---|---|
![]() |
Transmission
Transmission options | |
|---|---|
9-speed | |
18-speed creeper |
Transmission — 9 forward and 3 reverse
Gears | 9 forward and 3 reverse |
Three gears (1-3) plus reverse (R) in three ranges. | |
![]() | |
Transmission — 18 forward and 6 reverse creeper
Type | creeper |
Gears | 18 forward and 6 reverse |
Additional creeper range available on four-wheel drive models. | |
![]() | |
Dimensions
Iseki TS1910 Tires | |
|---|---|
2WD Standard tires (ag) | Front: 4.00-12. Rear: 8.3/8-24 |
Front: 6-14. Rear: 8.3/8-24 | |
Dimensions | |
|---|---|
Wheelbase | 54.3 inches
137 cm |
Length | 90 inches
228 cm |
Width | 44.5 inches
113 cm |
2WD Height | 76 inches
193 cm |
4WD Height | 76.8 inches
195 cm |
2WD Weight | 1587 lbs
719 kg |
4WD Weight | 1907 lbs
865 kg |
2WD Ground clearance | 12.2 inches
30 cm |
4WD Ground clearance | 10.2 inches
25 cm |
2WD Front tread | 33.5 to 37.4 inches
85 to 94 cm |
4WD Front tread | 37.8 inches
96 cm |
Rear tread | 33.5 to 39.4 inches
85 to 100 cm |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for Iseki TS1910 based on its 18 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 4 ft (48 in)1.2 m | Light Duty | Pasture clipping and light brush under 1" diameter. |
Rotary TillerSeedbed Prep | 42 to 48 in105 - 120 cm | Light Duty | Covers compact tractor tire width. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Iseki TS1910.
Estimated Continuous Field Runtime: 4.5 hrs
Approximately 4.5 hours of continuous field operation at ~75% rated power on a full tank (4.2 gal / 15.9 L).
Estimated 75% Load Fuel Burn~0.9 gal/hr (3.5 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Iseki TS1910 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Iseki TS1910.
Converted Equivalents:
Horsepower (HP)18 hp
Kilowatts (kW)13.4 kW
Metric Horsepower (PS / CV)18.2 PS
Direct Competitor Comparison
Compare Iseki TS1910 against same-era industry alternatives in the same horsepower class.
Current Model
Iseki
Iseki TS1910
Engine Power:Diesel (listed): 18 hp / 13.4 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester Type A 15HP
Engine Power:16.7
Production Years:1908 - 1911
Related models
Iseki TM15
- Power:
- 14.6
- Production years:
- 1995 - 2002
Iseki TX1510
- Power:
- 14.6
- Production years:
- 1978 - 1981
Iseki TX155
- Power:
- 14.6
Iseki TU1500
- Power:
- 14.7
- Production years:
- 1981 - 1984
Iseki TU1501
- Power:
- 14.7
- Production years:
- 1984 - 1994






